Question about Computers & Internet

1 Answer

I can't get my computer to accept my user password to logon to my computer; password is correct and is being typed correctly. I get that wrong username or password message. In addition to this, my computer won't load my personal settings...it shuts down after doing a "loading your personal setting" message--but doesn't load -- just shuts down but not off. I have been reading about other problems like mine only the others don't say anything about their username/password not being accepted. Should I buy the password recovery disk from Window Geeks? Isn't there another way? I have another desktop networked to the one with the problem. We are pretty certain it has the same username/password. How do I find this info.

Posted by on

  • 1 more comment 
  • Anonymous Apr 12, 2009

    my computer will not accept my password to log on

  • lorainestled Apr 23, 2009

    on the main login screen, computer will not accept de profile password even tho it is correct.

  • Anonymous May 01, 2009

    I have a dell experion and I am the primary user of the computer. All of the software and hardware was loaded by me. The computer is protected by McAffee and all of the protection is working. However, i cannot log into the computer as of yesterday. After attempting to log in, the screen stated "The User Profile Service service failed the logon. User profile cannot be loaded." Never had a problem like this before. I also have a juvenile account on the computer that I can access, however web access is limited. Any idea of how to access main computer account?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Please download the ERD Winternal Image from http://www.mininova.org/tor/857048 and burn it in a CD.
Thenboot your PC from the CD. Select your Windows Media Edition for whichyou have forgot password. Without asking for any password you will getinto Windows. Then goto control panel->User Accounts->Select theUsername[for which u want to change password]. Then use change passwordoption to change password. Then Reboot the PC and remove the CD. Nowyour windows password will be reset.
Thanks.

Posted on Jul 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start up


hi , Reuben

I would suggest you try safe mode.
Safe mode is a troubleshooting option for Windows that starts your computer in a limited state. Only the basic files and drivers necessary to run Windows are started. The words "Safe Mode" appear in the corners of the display to identify which Windows mode you are using. If an existing problem does not reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes.
If you don't know the cause of the problem, you can use the process of elimination to help you find the problem. Try starting all of the programs you commonly use, including the programs in your Startup folder, one by one, to see if a program might be the cause of the problem.
Follow the steps to boot the computer in safe mode with networking:
1. Restart your computer if it is powered on.
2. Tap the F8 key after your computer initially powers on.
3. Once you see the Advanced Boot Options menu you can stop tapping.
4. Use the up/down arrow keys to highlight your selection.
5. Select Safe Mode with Networking and press Enter.
6. You should see drivers loading, and then please wait.
7. You should then be at the Welcome Screen.
8. Logon to your computer using an account with Administrator privileges.

May 27, 2015 | Computers & Internet

2 Answers

Are 2002 Aztec computers compatible


I am assuming you are discussing the 2002 Pontiac Aztec, the early crossover with the rather distinctive look. I would assume that since they were made by the same manufacturer and they used the same parts that their computers should be compatible. I can't say so for certain as you haven't provided much information, but, unless one of the Aztec owner swapped out the original computer and replaced it with an updated device, the computers should be compatible.

If you are thinking of trying to swap computer chips, I would advise you to wait and let a professional do it at an independent shop. The reason I suggest this is simple, unless you know how to access the computer chip correctly, you risk accidentally ruining it. If you handle the replacement chip incorrectly it is entirely possible that for a stray static charge to ruin the chip by blowing out a trace. Also, if you damaged the socket from which the original chip was removed then it is possible that you will not be able to reinsert the new device without bending any leads on the bottom. If the leads are damaged, then the new computer won't work.

Even if the new computer chip and the original chip were already installed in installable cases (the way most desktop computer chips are installed), it is possible that when you removed the computer, you might have damaged the receiving socket which means that when you go to insert the new computer carrier it won't work correctly because a few or many of the pins on the bottom of the board won't sit correctly.

Jan 03, 2015 | Computers & Internet

2 Answers

How do you get rid of time zone New Zealand?


. You can change the clock's time and time zone.
  1. Open Date and Time by clicking the Start button 4f6cbd09-148c-4dd8-b1f2-48f232a2fd33_818.jpg, clicking Control Panel, clicking Clock, Language, and Region, and then clicking Date and Time.
  2. Click the Date and Time tab, and then click Change date and time. 18abb370-ac1e-4b6b-b663-e028a75bf05b_48.jpg If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  3. In the Date and Time Settings dialog box, do one or more of the following:
    • To change the hour, double-click the hour, and then click the arrows to increase or decrease the value.
    • To change the minutes, double-click the minutes, and then click the arrows to increase or decrease the value.
    • To change the seconds, double-click the seconds, and then click the arrows to increase or decrease the value.
  4. When you have finished changing the time settings, click OK.
  5. To change the time zone, click Change time zone.
  6. In the Time Zone Settings dialog box, click your current time zone in the drop-down list, and then click OK.

Aug 19, 2014 | Computers & Internet

1 Answer

Screeen is upside down


If you have a Windows OS, press and hold the ALT and CTRL (control) keys and then press the Up arrow. (If that doesn't work, try holding the Alt and CTRL keys and pressing the left (or right) arrow key twice.) If that fails, right click on the desktop (Windows+D will minimize all programs), anywhere with no running programs or icons. Then select the Screen Resolution option. Look for the line Orientation; use the drop down menu to select the correct orientation. Click Apply and then confirm the setting change if a confirmation window pops up. (This works in Windows 7 and 8.) For older Windows versions on laptops, you may need to select Graphics Properties (or a similar line) and then repeat this. The Windows screen rotation option is dependent on your video card. With some models, you'll need to open the graphics card properties to undo the rotation. You should see a line for the graphics adapter when you right click on the Display.

For Macintosh OS, make sure that the System Preferences is closed. Then open it by pressing Option/alt + CMD . Select the line Display. Find the button labeled Rotation: Standard then choose the correct screen orientation.

I hope this helps.

Cindy Wells

Jun 01, 2014 | Computers & Internet

2 Answers

How do I get the battery out of my acer laptop


Your Model of Aspire has a different battery release method, see attached pic on how to do it. This is a pic from your User Manual, you can download it from here Download Acer Aspire E1 572
Manual
. I suspect that the information you have been given regarding battery removal and passwords refers to removing the cmos battery as in a PC in the hope that it will clear Bios activated passwords.

1f8d6221-e1cf-4930-b562-78dc8560ceb4.jpg

May 04, 2014 | Computers & Internet

1 Answer

Toshiba Satellite A665 S6067 laptop wont recognize my SeaGate FreeAgent Go 500 Gb. device


I had a similar problem and I had to "Delete Volume" when in DIsk Management. I then had a choice to "Create Simple Volume" which I did, and then a wizard created the correct partitions and assigned a drive letter to my external drive. Everything was them OK.

Mar 21, 2014 | Computers & Internet

3 Answers

Http go acer com id 17883


I remember my password I wrote it down and even then it won't let me in. If I cannot get into this computer I will return it.

Mar 13, 2014 | Computers & Internet

1 Answer

Burning movies on the computer , playback fine on two computeers , will not play on ONN portable player used DVD-R


Burning dvd\'s is always a crapshoot when you have multiple machines. Computer drives are more tolerant on playback - the problem lies with your other, independent playback units. That is why in your main viewing area it is important that you have a few units so that if disk does not play in one machine, it will play on another. Has to do with the individual differences and calibrations of the machines involved. Store bought dvd\'s have less problems because their laser reflectivity is always higher than disks you burn, and therefore, easier to read properly. Price of the unit has no reflection on ability to properly read the disk. Sometimes and often, a cheaper machine will work better with copies - you never know.

Feb 19, 2014 | Computers & Internet

5 Answers

I can receive email on yahoo, but can not forward anything from my email account with yahoo


hey roger,

You will need to check your outgoing smtp settings in yahoo. Below is the information to set this up.
1) Yahoo! Mail Settings (if allowed)

Yahoo Incoming Mail Server (POP3) - pop.mail.yahoo.com (port 110)
Yahoo Outgoing Mail Server (SMTP) - smtp.mail.yahoo.com (port 25)

2) Yahoo! Mail Plus email server settings
Yahoo Plus Incoming Mail Server (POP3) - plus.pop.mail.yahoo.com (SSL enabled, port 995)
Yahoo Plus Outgoing Mail Server (SMTP) - plus.smtp.mail.yahoo.com (SSL enabled, port 465, use authentication)

Thank You,
Dell-Jesse L
Dell Social Media and Communities
Follow Dell on Twitter @dellcares

Mar 28, 2013 | Dell Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,995 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

100311 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...