- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
in your apple ipad switch on your wireless and search for the available networks you can find your router name just click that it will ask for the wep key its nothing but your wireless password you need to enter that then it will connect automatically
Hi! I will be more than glad to assist u in this concern..if u bypass the router it will work, the reason why the modem
wont talk to the router bcoz the router is not properly setup.. if you
are using a cable modem from ur cable company provider- u need to do a
mac clone on the router u have to clone the mac address of ur computer.
normaly the mac of ur computer is the one register to your cable
company and on the setup page of the router just selct on the internet
setup, dhcp after clonning the mac address of your computer. u need to
connect ur computer directly to the router and then after doing the
process connect the router to the modem. if u are using a username and
password, u have to use the pppoe settings on the router, if ur isp set
a static ip , set it up to the router, to check the ip setting of your
isp.. connect the computer directly to the modem and check if u have
internet.. then click on start, run and type cmd,it will give u a dos
prompt and from there type ipconfig/all and it will show u the ip
address, subnetmask, default gateway, dns server.. I hope this will
solve ur concern..
mine is flashing too - that shouldn't be the problem
you should specify problem a little bit more
I don't know how is your di-524 connected to the broadband, if you are trying to connect wirelessly or using cable, have you checked router config, do you need login and pass from your isp, do you use additional mode/router etc.?
The local Apple Genius Bench was nice to reload iChat and OS for us. But he could not get iChat going for me and my relative. It looks like iChat will have trouble between DSL and Cable but DSL to DSL and Cable to Cable each case is fine. Anyway, after connecting to Apple iChat Test Site Appleu3test04, my MacBook started to work better with iChat as my relative is able to see and hear us although on my end the incoming picture is not too clear. Then finally Upgrade of New OS seems to make the picture sharper. Thinking back, the original problem came from Modem upgrade to higher speed but I did not use the new DSL telephone filters. Please post this up to help other frustrated iChat users. Anyway, we still like Apple! By Jim on 05/30/2009
One of your neighbors may have changed it for you, but you have the hardware, just reset it, and get a LONG cable to it, as you only get problems trying to set the Router with the wireless connection.
After resetting to factory default,
Change admin password
Set wireless security:
Wikreless/Wireless MAC filter.
- here you allow witch MAC address is allowed to access your network.
you find your own MAC address by typing ipconfig /all in a cmd.
If no wan light bypass the dlink router and check if ethernet cable connected to wan port is working. Once you are able to go online through modem connect cable to WAN if light does not go on log into oruter and clone mac address and save settings.If doesnt work powercycle router and turn modem on first then router next if doesnt work upload latest firmware.
You need to cascade the Dlink wireless router to your RV042.
Suppose your RV042 has a default IP Address of 192.168.1.1, and the DLINK IP uses 192.168.0.1. Your Physical connection is from the regular port of the RV042 going to the WAN/Internet Port of the DLink wireless router.
Once you do that, your Dlink router should automatically obtain an IP from the main router. If it did, configure your wireless settings and you should be able to connect via wireless.
This is just one way to cascade your router to another router.
For more information, click here.
problem a: could just be your isp is slow therefore when you share the connection it is slow when both pc are connected. Also it could be that your firmware on the router is outdated and creates problems for you. Try updating to the latest firmware go to www.dlink.com and select your router. In addition, i find with dlink if you use their software to control your wireless adapter you get better performance than if you use windows default software.
problem b. Youa re right wep security creates overhead due to encryption will always be slower than no encryption. If you are just worried about people stealing your internet access then i suggest you use unsecure connections but restrict access to the router by mac address. WEP can be hacked easily anyway.
problem c: use port forwarding for your torrent to increase speed. chances are your firewall and antivirus scans everything thus slowing down your connections.