- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i've had the problem too some time back, try this,
first try it on another system which was not connected earlier if it works then follow as below
remove the Majic Jack and then go ahead and uninstall the driver and all just clean everything related to Majic Jack on your system, now connect the Majic Jack to preferably a different port than earlier, the drivers and all will be downloaded again and software will be upgraded all by itself and will install again
I do not think so for the following reason. The SNET07526 is a CE machine where all of the available software is aready installed on the machine. There is no known way to install other software, so the majic jack needs its own software to operate and that cannot happen.
magicJack requires approximately 80 kbps of bandwidth.. please contact your internet service provider and make sure you have at least that amount..you're not required to tell them that your using majic jack, but it shouldnt be a problem..Dial-up internet IS NOT enough to run Majic Jack, but "lite" DSL will work.