Question about Watches

Open Question

This is a Akribos watch with 3 sub dials I need to set the day of the week on a sub dial one side push button changes the month one push button changes the 24 hour dial remaining button is to change the date and set the time. Any ideas? Thanks, Eva

Posted by on

5 Suggested Answers

escapement
  • 2334 Answers

SOURCE: need instructions to reset sub dials on Nautica Chronograph watch

Pull out crown to the first click and push and hold pushbutton at 2 or at 4.

Posted on Mar 22, 2009

  • 29 Answers

SOURCE: Trouble with Fossil ME1014

I looked at a picture of the watch. I see the date. the dial that is right below the hands is a moon dial which does the phases of the moon & below that you have a separate second hand. A lot of times on a watch that looks like that if you pull the crown where you set the watch with out half a click it will set the date if you turn it on way and the moon dial if you turn it the other way. To set the moon dial on the watch you need to put it on the full moon when the moon is full again then it will keep up with the phases of the moon. I hope this helps.

Posted on Mar 10, 2008

escapement
  • 2334 Answers

SOURCE: how to set a Honora chronograph watch

You have to upload here all details of the watch: model, ref. number. Movement number and good pic would be very helpfull.

Posted on Dec 21, 2008

  • 3 Answers

SOURCE: adjusting Date and day on a Festina 3 dial watch

Alhamdulillah, the problem solved (at last) tks to IRONMAN (http://www.fixya.com/support/t579677-instructions_mens_festina_watch_16095#SameProblemContinued)

The steps are like this :
1. Pull the crown full, and turn it clockwise until you find the right day.
2. and then push it one click (dont push it to hard so it back to normal position) and turn the crown counter clockwise to adjust date.
3. Push the small button near the crown to adjust month.

and voila... the problem solved

Posted on Jul 05, 2009

escapement
  • 2334 Answers

SOURCE: trying to solve if my daytona model is a fake ....

Unfotunately for you- your Daytona is fake.

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the DAY of the week on my new watch, Akribos XXIV Women's AK560RD Quartz Multi-Function Genuine Leather Watch ?


There are three positions for the crown. You can pull it out all the way to third position and turn up or down Each of those turn one sub-dial. then you can push back one position and again up or down. Each of those turn another sub-dial hand.

Sep 17, 2015 | Watches

1 Answer

Set time on MSP74810W


Instructions for setting an MSP74810W watch.

Press the "Mode." button three times (the "Mode" button is the one next to the lower left of the dial when facing it).The first time you press you'll see the ST, or stop watch function, the second time you'll see the AL, or alarm function, the third time you'll be back to the time of day function but the seconds will be flashing.

Change the flashing seconds digits to read 00 by pressing the "Start" button (the "Start" is the button next to the upper right of the dial when facing it).

-To advance from the flashing seconds' reading to the hour of the day's digit/digits you press the "Reset" button at the lower right of the dial,
-To advance from the flashing hour digit/digits to the minutes digit/digits you again press the "Reset" button,
-To advance from the flashing minutes digit/digits to the month's digit/digits you again press the "Reset" button,
-To advance from the flashing month's digit/digits
to the day of the month's digit/digits you press "Reset,"
To advance from the flashing day of the month's digit/digits to the day of the week's abbreviation you again press "Reset,"
-To advance from the flashing name of the week's abbreviation back to the seconds' of the minute you again press "Reset," and from there you can go through the cycle again.

While the hour of the day with its A[M] or P[M] designation, the minutes of the hour, the month of the year's number, the day of the month's number, or the abbreviation of the day of the week's name is flashing press the "Start" button once, repeatedly, or hold it down to advance the number or letters to their correct designations.

Once all designations are correct push "Mode" so that none of the numbers or letters are flashing. Your watch is now set.

Apr 01, 2014 | Watches

1 Answer

B.m.w. geneve 250 watch what are the four small dials for how to operate them denis


If it's the same watch I have, the four dials from right to left are day of week, hours left in the day, date 1-31, and possibly a chronograph (mine makes 2 revolutions/minute). On the case, there are three large knobs on the right and two small flush screw-like objects on left. The large knobs (top to bottom) are month selection, time set, and day of week select. Month and day can be selected by pushing the knob to the desired date. On the left, you will need a fine pen or stylus to press the center. Top to bottom, these two buttons control year and date selection.

Nov 23, 2010 | Bulova Watch

1 Answer

How to set date on it?


Thank you for contacting FixYa.
Pull the crown out to position No. 3, turn clockwise to go to hour and minutes hands; the small dial showing days of the week will move, and the 24-hour dial will also move correspondingly.To set the date, pull the crown out to position No. 2 and turn clockwise until you have set the desired date; push the crown back to position No. 1.

Multifunction watch:Pull the crown out to position No. 3, turn clockwise to go to hour and minutes hands; the small dial showing days of the week will move, and the 24-hour dial will also move correspondingly.To set the date, pull the crown out to position No. 2 and turn clockwise until you have set the desired date; push the crown back to position No. 1.

Aug 25, 2010 | Fossil BQ9177 Wrist Watch

2 Answers

Setting month, date, and day of the week on non-digital watch


Try pulling the stem out. Turn the stem in the counter clock wise direction and see if that changes the date/day

Dec 21, 2008 | Watches

2 Answers

Adjusting Date and day on a Festina 3 dial watch


Alhamdulillah, the problem solved (at last) tks to IRONMAN (http://www.fixya.com/support/t579677-instructions_mens_festina_watch_16095#SameProblemContinued)

The steps are like this :
1. Pull the crown full, and turn it clockwise until you find the right day.
2. and then push it one click (dont push it to hard so it back to normal position) and turn the crown counter clockwise to adjust date.
3. Push the small button near the crown to adjust month.

and voila... the problem solved

Sep 05, 2008 | Festina 161625 Wrist Watch

2 Answers

Anne Klein chronograph watch


The button advances the numeric day. After the numeric day is advanced one full month, the month dial advances to the next month. I just about got a blister pressing the button enough times to advance the month from January all the way around to December. Then I had to advance the numeric day to the current numeric day. The previous person told you by turning the dial 24 hours you can advance the alphabetic day of the week by one day (Sun, Mon,etc.).

Sep 04, 2008 | Casio G-Shock G7100D-1V Wrist Watch

1 Answer

Adjust the date and day on a festina 3 dial watch


I've just worked it out! Change month....depress inset button on side above hand winder. One push with cocktail stick or similar will advance month. Change date.....pull out hand winder half way, turn knob anti-clockwise until desired number is met. Change day...... pull out hand winder fully, turn clockwise passing midnight repeatedly until day is set, continue to set time, keeping an eye on 24 hour display for am/pm.
All the best, Bob

May 06, 2008 | La Crosse Technology E. Howard Ambassador...

1 Answer

Relic watch 3 dial


Chances are they represent one of the following-

Month of the Year
Time of Day (military time)
Day of the Week
Day of the Month

It depends on what the dials have on them - usually there is some indicator (abbreviated months, numerical values, etc)

Feb 20, 2008 | Relic 0504648FA

1 Answer

Setting sub-dials when several months wrong


Try the manufacturers web site, you can normally find all the information you could require

Dec 11, 2007 | Citizen Eco-Drive BL006056H Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

1,383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Jimmy Accardi

Level 2 Expert

98 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...