Question about Waring Pro Juice Extractor - Black/Stainless-Steel

1 Answer

Waring juice extractor pulling to one side and vibrating

I have a a white waring juice extractor. I have had it for 6 years now. I have noticed recently that on using it and feeding it with soft fruit such as oranges and grapefruits and tomatoes it needs to be pushed in the feeder quite hard for it to juice. When this happens it starts to make more noise and if more is fed, including harder vegetables it starts to vibrate and on many occasions starts to move around quite a lot. It is like it has a life of its own
I am wondering whether it the blade or whether it it badly balanced. In the past i have not had this problem. I hope you can help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers

I would say you are right. The blades are dull & or
the balance of the motor has become lose or broken free. A broken blade can also through balance off.

Replace or repair.

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have it for a few years and used very little, today it started to make noise and vibrate a lot, I disasembled it a few times everything seems all right but the vibrations did not stop, i am afraid of...


This is the nature of the juicer, it does not eject the pulp, and they go out of balance very
easily especially with a new blade installed. Only suggestion is juice only hard produce,
and feed it as evenly and as slowly as possible. I juice apples, carrots and celery.

Feb 17, 2011 | Acme 6001 Juice Extractor

1 Answer

I need a cutter blade parts no 015180. Can I pay for it on the net?


You can buy it from Waring or Omega, same blade.
Or, just google Acme juicer parts. $20 to $30. Look
out though, found new blade increases vibration. You
can also sharpen old blade by slightly drilling into
each burr on the blade with a small drill bit. Been
using the same blade for several years.

Jan 28, 2011 | Acme 6001 Juice Extractor

1 Answer

I haven't used my Acme Supreme Juicerator in years. How do you assemble the juicer? The flat blade sits on the aluminum filter? How does it attach to the motor? Am I missing a part


Juice bowl first, then the basket followed by the
shredder blade which is all held down by the
white clutch nut. If you're missing the nut ctc.
Waring at 1 800 492 7464 for a new one.

Nov 04, 2010 | Acme 5001 Supreme Juicerator Juice...

1 Answer

Need instructions on how to use the Acme 6001 Juicerator.


Call Waring at 1800 492 7464, they may be able to help you out. There is not
a whole lot involved here. Place the juice bowl on the base first, then the basket,
blade, secure with the clutch nut and rotate the cover to lock it in place. Watch
out they vibrate, so juice hard produce evenly and slowly.

Oct 02, 2010 | Acme 6001 Juice Extractor

1 Answer

My juicer spins off of its axis i think, wobbles all over, spinning itself in circles spewing juice everywhere


Omega and Acme juicers will vibrate because pulp
is not ejected during juicing. Only suggestion I can
offer is avoid soft produce and feed as slowly and
as evenly as possible. Been using an Acme for 21
years and did notice a duller worn blade does produce
less vibration.

May 23, 2010 | Omega 1000 Juice Extractor

1 Answer

My waring pro juice extractor wont come on what is the problem


i hate to say this!! but the motor is fried!! cost more to fix it than would be to buy a new one i just threw mine out the motor is about $40 plus labor

Jan 13, 2010 | Waring Pro Juice Extractor -...

1 Answer

I need manual to learn how to use it my friend gave me juice extractor 6001c but no instructions so I dont know how it works thanks waring commercial juice extractor 6001c model 31je27


If you Google your query you will be able to find the manufacturer, they should be able to help you with a manual for this model. I hope this is of some help.

Nov 05, 2009 | Waring 6001 Commercial Juice Extractor

1 Answer

The 6001 vabrated so much the top came off and the flang bent.


WARING AT 800 492 7464 HANDLES ACME
JUICERS. VIBRATION MAY NOT INDICATE
REPAIR. THIS JUICER DOES NOT EJECT
PULP SO IS PRONE TO VIBRATION JUST
LIKE AN INCORRECTLY LOADED WASHING
MACHINE. HOWEVER, SEVERE VIBRATION
WILL CAUSE THE BLADE TO CHEW UP THE
CHUTE. YOU WILL NEED A NEW COVER.
TALK TO WARING. ANOTHER PROBLEM
IS NEW COVER PROVIDED WILL NOT FIT
SOME OLDER JUICERS WITHOUT FILING
DOWN THE EDGE OF THE COVER. TAKES
TIME BUT CAN BE DONE.

Jun 24, 2009 | Acme 5001 Supreme Juicerator Juice...

Not finding what you are looking for?
Waring Pro Juice Extractor - Black/Stainless-Steel Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Waring Juicers Experts

Cindy Wells

Level 3 Expert

4755 Answers

kakima

Level 3 Expert

96417 Answers

eyecam

Level 2 Expert

86 Answers

Are you a Waring Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...