Question about Lands Phones

2 Answers

We have UNIDEN phone system I pick up the phone and it sounds like it is disconnected. Two of our phones are out of range

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lands Phones Master
  • 13,433 Answers

Two of your phones are too far from the station or they are not registered with the station, suggest to re connect the phones to the station or register them with the station and see if it helps.

Posted on Mar 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

It seems to you dont have enough signal .

Change location and check it works .

Posted on Mar 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The display screen is showing the word "SEARCHING" on the screen, can't get the phone to work, cannot pick up an incoming call, the display also displays "HANDSET OUT OF RANGE" WHEN ANY BUTTON IS...


From the Uniden support site.

You can first try a Basic Reset.

A reset is done by following the below steps:
1. Disconnect the battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect battery into handset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base


reference

Mar 13, 2015 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Setting up answer system on my cordless phone


Pick the model of your Uniden 5.8GHz system from the list beginning at http://www.uniden.com/owners-manuals/cordless-phones/scat/cordlessphones_mnl to download a copy of the manual.

Feb 05, 2013 | Uniden 5.8GHz Expandable Cordless Phone...

2 Answers

I have a uniden 9035 it say on the screen serching


The phone is looking for base. You need to register the handset to the base

Sep 24, 2011 | Uniden Cordless Phone

1 Answer

I have a Uniden cordless unit hooked in 4 lines. Incoming calls ring briefly for about 1 second and go out! You can talk if you pick up but not sure why no normal rings. There is no problem calling out....


When someone calls you and your phone behaves this way, does the caller get disconnected? The phone may be causing this, but it may also be due to trouble in the telephone line itself. The trouble is caused by defective wiring, a partial short circuit. When you pick up your phone to call out, the voltage on the phone line is low and it works normally. When you get an incoming call, a high voltage is sent to ring the phone. Because of the partial short, the phone company's equipment thinks you've answered the call as soon as the ringing starts. But you haven't picked up the phone, so the phone company's equipment thinks you've hung up and disconnects the call. The result is that short burst of ringing.

Disconnect the cordless phone base unit from the line and try another phone. If you still have the trouble this confirms the line is at fault. You'll need to contact your phone service provider for service. If it's in the outside wiring, they're responsible for repair. If the problem is in your home wiring, you may need to pay them unless you have a wiring maintenance plan.

If the problem goes away when the cordless base is disconnected, then it's time for a new phone.

Jul 16, 2011 | Uniden Cordless Phone

1 Answer

There is no sound when my Uniden Phone and the additional handsets are picked and switched on. Internet is working so problem with telephone line ?


I can answer part of your problem only, I'm afraid. Because your Internet is working, you don't have any problems with your phone line.That rules out that part for you. Try going to www.Uniden.com and looking up their support page for your phones . You might find your answer there.

May 06, 2011 | Uniden 2.4 GHz Cordless Phone System

1 Answer

My uniden hanset stopped working. When I click on


Disconnect your phone from the wall and charger....Take out the Batteries and wait 2 secs...Replace batteries and recconnect phone ..see if this problem is still happening.

1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.


Heres a site for more help:http://mycusthelp.net/UNIDEN/supportkbitem.asp?sSessionID=&Inc=1093&sFilA=Product&sFilB=Model&sFilC=&FA=-1&FB=-1&FC=-1

(Copy paste to browser)

Mar 08, 2010 | Uniden Cordless Phone

1 Answer

Uniden powermax 24 out of range


Check the line comming into the main handset base. Make sure it is not cracked or your cat hasn't chewed through it.LOL This sounds like the most likley solution. Try hooking the main phone line to an ordinary old fashioned touch tone phone with a wired handset and if that is working then the problem lies in the main base of your new phone. It could be as simple as reprogramming the base.

Jul 24, 2009 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

Phone disconnects and shows "out of range of base" during calls


Press "Menu", Select "Handset Setup", select "Select Base", and then on that Select Base screen, move the arrow next to "Auto" and press select. I have been told this should solve your problem.

Apr 25, 2009 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

Uniden PowerMax 2.4GHZ Digital Phone - need instructions


I have the Uniden Power max 2.4 digital phone (base and 1 extra). We now need an answering machine since we are switching from TWC picking up our messages.
What will work with these phones since we think ours are disconnected?

Oct 23, 2008 | Cell Phones

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4917 Answers

yadayada
yadayada

Level 3 Expert

68970 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...