- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This model doesn't have a headphone jack. The only JVC TV in the series that does is the model AV-20D202. For the JVC AV-2732, use the RCA audio out jacks with an RCA to 3.5 mm adapter to connect to the headphones. The front audio jacks are audio in (for the audio from a video camera for example).
When you use any external speakers or headphones through the audio out jacks, make sure to turn off the TV speakers. Press Menu and navigate down to TV Speakers (up/down arrows). Then use the right/left arrows to select Off and then Exit the menu. Make sure you scroll the TV volume before doing this. Note: if your headphones do not have a volume control they are a bad choice for this type of audio output.
Your vertical IC will need resoldered. And check near this IC for bad capacitors. And any and all grounds where there are heat sinks attached to other transistors and ICs. This should restore your TV. Find a hobbiest or TV tech to pull the board out for repair!
If you or someone you know is comfortable with soldering electronic circuits, you can solder some long extension leads to the speaker terminals in the set, feed them out through the ventilation slots in the back, and hook your extra speakers to them. Just be aware that the audio output circuit was designed to be used with the speakers in the set only. If Toshiba had meant for external speakers to be used they would have provided terminals for you. You may damage the amplifier with the extra load.
Roy, easy way to do that is go to wally mart, K-mart sears etc. and get a set of "rca wireless headphones" they are inexpensive and the headphones have a volume control built into them so you can have it as loud as YOU want, and the wife can set the volume on the tv where she wants, bought a set for my father-in-law and he loves them, (he`s very hard -of -hearing) you can even walk out of the room with them on and still hear the program, buy them for yourself as a christmas present, enjoy, BMW Rider
Your TV is set for standard broadcast.
You need to go to the set up menu and change from antenna/normal to cable mode.
In standard broadcast mode you receive off the air programs 2-13 vhf and 14-83 uhf.
In the cable you receive 2-13 and cable channels 14 -125 if the set is not too old.
When cable channels first came out some sets would just cover 14- 36 or 14- 47 or 14-66 etc.
The newer sets cover the now standard cable channels 14-125. Hope this helps you