Question about Lexmark X3470 All-In-One InkJet Printer

1 Answer

The language on my printer screen appears to be Chinese. It used to be English, but my grandson pushed buttons and I don't know how to get English back. Help-- it is a Lexmark X3470.

Posted by on

  • Anonymous Mar 18, 2014

    change the language from chinese to english

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 4,338 Answers

How to Change the Display Language on a Lexmark X3450/X3470/X3480

  1. Turn off the power by pressing the Power button once.
  2. Then press and hold both the Start button and the Power button.
  3. Once the screen displays Mfg Menu enabled, release both buttons and wait until the display shows Copies:1.
  4. Press the Mode button three times. All the indicator lights will go out and the screen will display LCD button test.
  5. Press the up arrow (The language on my printer screen appears to be - pattlnk_692006_1047-up%20arrow.gif ) once. The screen will display Clean NVRAM.
  6. Press the Start button once. The printer will be reset. Afer a few seconds, the message Language: English will appear on the display.
  7. Press the up arrow (pattlnk_692006_1047-up%20arrow.gif ) until you reach your preferred language. Press the Start button once, thThe language on my printer screen appears to be - pattlnk_762006_1319-menue.jpg"http://i.fixya.net/uploads/images/pattlnk_762006_1319-menue.jpg" alt="pattlnk_762006_1319-menue.jpg" class="h_mi" /> ) button.
  8. Turn the printer off and then back on to disable the manufacturer menu (Mfg Menu). NOTE: After clearing the NVRAM, you will need to print an alignment page. The printer LCD will display this while the alignment is being performed.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hp Laserjet 9050dn printer was not coming up as a result of faulty firmware. A new firmware was replaced, but the printer display is now in Chinese language. What do I do to display it in English.


When you power on your printer and when it starts to count memory press and hold green button until all lights are on. Release the button and you will have pre-boot options, there you can find option to change language.

Jan 27, 2016 | HP LaserJet 9050dn Printer

1 Answer

Please somebody can teach me how to change language on biz hub c300. It is in chinese and i would like to change to english or portuguese. Thank you


On Control Panel-Touch Screen, Down right Side there is a tab to change the languages/Language Setting.
Even if it is Chinese or Portuguese language showing just click on the down right side button on touch screen, a new menu will appear. From there you can select your desired language.English-Chinese etc.

Mar 13, 2015 | Konica Minolta Bizhub C300 All-In-One...

1 Answer

Change language to english


You'll need to reset the printer first, and then it will come up with what language you want to use, choose English. Here's how to do it.

Sep 07, 2014 | Canon PIXMA MX472 WIRELESS OFFICE...

1 Answer

How to change the language settings from chinese to english in hp printer m1218nfs


Press Menu button..one time
Press " >" arrow button seven times,
Press enter,
Again press enter.
Go to English language with help of arrow buttons, to save the language press enter..

Aug 19, 2014 | HP LaserJet Printers & Copiers

1 Answer

Change printer language brother printer


Found below instructions - should work to change from chinese as well.

Your Brother machine's LCD can display information in English or Spanish. The default language is English.
To change the language on your Brother machine's LCD, follow these steps:

  1. Press Menu, 0 (Initial Setup), 0 (Local Language).

  2. Press the Up or Down arrow key to choose English or Espanol.

  3. Press the OK key.

  4. Press the Stop/Exit key.

Oct 04, 2013 | Printers & Copiers

1 Answer

How to change the language from Chinese to English in Canon Pixma MX376 printer?


When you plugged in the printer and hit the power button the very first thing to come up on the display is language selection. If that didn't happen then you need to call 1-800-OK-CANON and ask them how to set your printer back to factory defaults.

Dec 31, 2012 | Canon PIXMA Printers & Copiers

1 Answer

How do I reset the printer to the english language panel display


Follow these steps to change language setting on the printer display :
1.On the printer control panel, press the Left arrow twice or the Right arrow seventeen times on the Menu button until SELECT LANGUAGE? appears on the printer display screen.

NOTE: If the language is currently set to a language other than English, the Select Language? menu option will appear in that language.

2.Press the OK button.
3.Press the Left or Right arrows on the Select Photos button until your desired language appears.

NOTE: Even if the printer is currently set to another language, the name English will appear in the English language.

3.Press the OK button to select the language. A message requesting confirmation of the selection will appear appears. If the correct language is displayed, press the OK button. If the incorrect language appears, press the CANCEL button and start the selection process again.
4.When the SELECT COUNTRY/REGION? setting appears on the printer display screen press the OK button to continue.
5.Press the Left or Right arrows on the Menu button until the desired country/region appears on the printer display screen.
6.Press the OK button to select the country/region.

Nov 07, 2010 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Change from Chinese language to English language on the Panel


function, general option on screen which is the 1st option, select last option key operator, enter code 0000 unless it has been changed, then number 15 language default which is on the 4th screen item 1.

good luck

Mar 25, 2010 | Panasonic Workio DP-2310 All-In-One Laser...

4 Answers

I need to change the language from Japanese to English on my Pixma mp170 mprinter. I have been told to press menu till number 7 appaears then the arrow till 6 appears then ok. then I should have the...


1. Press the Copy button.
2. Press the menu button 7 times or until 7. ----- is on the LCD.
3. Press the Right Arrow (+) button twice.
4. Press OK.
5. Press the Right Arrow (+) button three times.
6. Press OK.
7. Press the (-) or (+) buttons until ENGLISH is on the LCD.
8. Press OK.
9. Press Stop/Reset button to complete.

Apr 21, 2008 | Printers & Copiers

Not finding what you are looking for?
Lexmark X3470 All-In-One InkJet Printer Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...