- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Jun 28, 2013 - Uploaded by ApplianceVideo.com
... symptoms: Clock and display does not work At: http://www.appliancevideo.com For ... and show you how to ...
Unfortunately, 9752834A is not a model number for the KitchenAid Superba. Usually the model number will have 4-5 letters, 3 numbers, 2-3 more letters and then a final number. Look inside the oven door for a plaque with the model number. With the correct model information, you can see if the lens cover is available.
it sounds like the heat escaping from the door damaged the electronic control board part number 8186393 and sears has it for 200 dollars.the way the door was left open was directing the heat right at the computer board and you sholud never use the stove for heating the room or things like this happen
ran the SCC and the oven door unlocked when completed but the touchpad did not. Can;t use over at all, top of stove works fine. None of the bottons for the oven works. still says self clean completed, will not go away, can't use oven at all.
sonds like a bad hightemo thermostat, loacted on the back wall behind the rear panel, common issie for ovens ,espessially after going through a self-cleaning,part number 9759242, part is about $50 turn off power before attempting to change, LIVE WIRES!!!!
Above glass in the oven door , there is a couple of vent holes. Using flashlight, somewhere in the middle you can see the locking bar in the lock position. I just helped it with small screwdriver to unlock and all was fine for a long time.. Now I'm searching why the oven quit ,but broil still working. No error displayed and no problem when going thru the selfdiagnostics . Any ideas ?. Darn thing.
Did somebody use the control lock by accident.
Here is how to disable it. Hopefully it will work:
The Control Lock feature shuts down the control panel pads to avoid unintended use of the oven. The Control Lock feature may be used either when the range is in use or turned off (for example, during cleaning).
To lock/unlock control:
Before locking, make sure the oven, the timer, and Timed Cooking are off. Press and hold the START pad for 5 seconds until ?CONTROL LOCK? appears on the display. Repeat to unlock, and ?CONTROL LOCK? will disappear from the display.
Hope this helps