Question about Radio Shack Pro-97 Handheld Scanner

1 Answer

I have misplaced my user guide for my Realistic Pro-36 scanner and need to know how to clear and reprogram frequencies.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i program realistic pro-59 scanner


http://support.radioshack.com/support_electronics/8567.htm

don't know what you will pickup. Nearly all law enforcement, ems, fire have gone to digital trunked systems that are encoded. The above link has a link to the operating manual. You will need to know the frequency of whatever you are wanting to listen to.

Aug 28, 2016 | Radio Scanners

1 Answer

Can a realistic pro 55 model 20 124 be programmed to different frequencies?


Hello, your scanner appears to be a 10 channel crystal controlled scanner. I'm estimating it to be around 30-40 years old. I think there is a couple companies still making custom crystals but you have to find the freq's #'s to give them. Here is the freq. range it will pick up. Frequency range RX 30-50 / 144-174 / 450-512 MHz I personally would take the money spent for crystals and apply it towards a newer scanner that is programmable so no crystals needed. Here's a link to some more info;



RadioShack Realistic Pro 55

Sep 07, 2015 | Radio Scanners

1 Answer

Looking for a manual for a Realistic Patrolman Pro 40 UHF/VHF Scanner. I don't even know what kind of power supply it needs.. LOL


Hi, that unit looks to be a mobile scanner and if I'm seeing right then you would need a Base power supply that could supply 12volt to it. Course you could also use a computer power supply and find the 12 volt line out on it. Here is the link to some spec's for it. Looks also to be crystal controlled so it cannot be reprogrammed. Good luck.

RadioPics Database RadioShack Realistic PRO 40

RadioShack Realistic Pro 40

Sep 06, 2015 | Radio Scanners

1 Answer

Have a pro 2020 realistic programmable scanner. got working bu after turning off, turning back on will not scan. just shows - - - - - - - - . on screen


The memory on the unit is not retaining the frequencies. Check for a small battery on the circuit board like a button battery you would find on your computer motherboard. Replace the battery and reprogram the unit.

Aug 21, 2010 | Radio Shack Pro-2052 Scanner

1 Answer

Have realistic pro-42 hand held scanner


For a comprehensive database of active frequencies in your area, along with a lot of other useful scanning information, visit:

www.RadioReference.com

Bill B

May 10, 2010 | Radio Shack Pro-96 Scanner

1 Answer

How do i remove all codes from my radioshack pro-76 scanner


For a full reset, turn the scanner off and then power it back on while holding the 2 and 9 keys. CLEAr will appear on the display. NOTE: this will clear all frequencies and any other information that you have programmed into the scanner.

To clear/erase a single channel just enter frequency 0.0

Need the manual? You can download/print it here:

http://www.rigpix.com/rs-realistic/radioshack_pro76_manual.pdf

If this response helps, please take a moment to post a rating for me. "Very Helpful" would be appreciated.

Dec 03, 2009 | Radio Shack Pro-95 Handheld Scanner

1 Answer

How do clear the scanner to re program it


Programming a frequency into a channel clears the previous channel entry, so there's really no need to "clear" the scanner for reprogramming. To eliminate an unwanted frequency, you can either press the LOCKOUT key to prevent the scanner from stopping on a specific channel, or you can "zero" a channel:

1. Press SCAN/MAN to stop
scanning.
2. Use the number keys to enter
the channel number (1-200)
you want to clear.
3. Press PGM. F=C appears.
4. Press 0 then ENT. The
frequency number changes to
000.0000 to indicate the
channel is cleared.

Need the manual for your scanner? You can download/print it here:

http://support.radioshack.com/support_electronics/doc69/69887.pdf

Nov 05, 2009 | Radio Shack Pro-82 Scanner

5 Answers

Radio Shack Pro 97 Programing Problem


clearing all locked-out frequencies in a search bank

1. Press SRCH.
2. Select the search bank in which you want to clear all
locked-out frequencies.
3. Press FUNC then press L/OUT. Lockout list appears.
4. Press FUNC then 6. Clear entire list ? Press 1 to clear all, any other key aborts appears. Press 1 to clear all locked-out
frequencies. List cleared. appears for about 2 seconds.
Press any key other than 1 to cancel clear.

Let me know how this goes and if you need any further help.

thanks

May 04, 2008 | Radio Shack Pro-97 Handheld Scanner

Not finding what you are looking for?
Radio Shack Pro-97 Handheld Scanner Logo

1,652 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Scanners Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

473 Answers

Are you a Radio Shack Radio Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...