Hit sixes and fours in all the balls. - Computers & Internet

Golf Balls are numbered in order for golfers to be able to distinguish between their ball from other balls of the same brand. You can imagine how many golf balls could be lost in the woods; numbering them helps to find the ball that you hit and not the balls of the other six people that thought they were good enough to smack a four dollar Titleist Pro V1 around the course.
This being said, it is common practice to create distinguishing marks on your ball at the tee box with a permanent marker. I always thought that this was so that it wouldn't be so easy for your buddy to drop the next ball from the sleeve of balls he has (which all have the same number), claiming he miraculously "found" his ball sitting up nicely in the semi-rough just over the hill in front of you. Although there are obvious ways around this, so maybe its just to display some creative artwork skills before the round.

buy new keybord

I know that this is going to sound strange. But hit it with a hammer like you are putting it on. This will pop it right off. I know it sounds strange but it works great!

3 balls, first, first batman shot six then he will take a run then other player will shot six at lost ball. hows that easy.

say the code is 3456 you hit the number 1 key three times the number 2 key four times the 3 key five times and the number 4 key six tmes. then to store it you hold down the number six.

this is what you need to do. turn the phone on. hit ##7764726 (program) then enter phone model number 8800 so it would look like this ##77647268800 pres SEND. Service cod will pop up, hit 000000 all zeros, six of them to be exact. press okay on service program it will bring you to the esn screen, hit ok. now it will say phone number. enter either all zeros or your phone number, the last four of the phone number you enter will be the unlock code. so if you enter 555 555 5555 your unlock code will be the last four so 5555. just hit okay untill your phone resets. when it turns back on, your unlock code will be the last four digits!

Depends upon if you have the four cyclinder model or the six cylinder. The four cylinder would have four spark plugs and the six cylinder would have six spark plugs.

i think the best solution is to replace the lower control arm that has the joint pressed into that member. to release the ball joint from the knuckle...get a 4 lb sledge and hit the side of the cast iron knuckle which will release that beveled shaft of the ball joint out of the knuckle,dont hammer on the threaded ball joint shaft itself ...it generally takes 3 or four strikes but once lose it will fall right down

Hi,
Getting the opposition out quicklyTry bringing the medium fast or medium bowler on. Then, place the bowling marker just short of the good length spot or even further down towards the bowler. Try inswing ball or outswing but drop the speed to almost nil. Keep the speed to two or three lines (yellow meter). The batsman will play a backfoot defensive shot and eventually get bowled or LBW. 

A second way of getting the batsman out quickly is bring the medium fast or fast bowler and try bowling inswing bouncer and place a fileder at deep thirdman for a catch. This trick only works when the batsman is new to the crease or tailenders.

Votes: 1 100% 0%
Easy run outs
Go to "My Cricket" then click "Game Settings". Set "Auto Fielding" to "Manual Fielding". Then, start a match and choose a fast bowler. Change the field by using "Field Editor" and select "Retreat 3:. Bowl out side offstump batsman will defence. Do not get to the ball immediately. Wait for two or three seconds. The batsman will run. Go and pick the ball and press [Space] + S for hitting a direct aim at non-strikers end or [Space] + W for hitting a direct aim at strikers end. Most of the times the batsman will be out. Note: Be patient as the batsmen will not not run sometimes.

Votes: 1 0% 100%
Easy six shots
The more you play, the more you will master the game. It is not easy to start hitting six shots from the start. Even after much practice you will find it difficult to play the all the shots. The best way is to play six shots down on the long on and long off boundary using [Down] + [Shift] + S. Players who have good calibre like Sachin Tendulkar, Virender Sehwag, etc. will be find it difficult to hit six shots. If you try with other players you may end up with a mis-timed shot and give a catch. If bowled onto the stumps, for beginners play it down the legside using S + [Right].

Votes: 0 0% 0%
Easy six shots
The more you play, the more you will master the game. It is not easy to start hitting six shots from the start. Even after much practice you will find it difficult to play the all the shots. The best way is to play six shots down on the long on and long off boundary using [Down] + [Shift] + S. 

Players who have good calibre like Sachin Tendulkar, Virender Sehwag, etc. will be find it difficult to hit six shots. If you try with other players you may end up with a mis-timed shot and give a catch. If bowled onto the stumps, for beginners play it down the legside using S + [Right].

Votes: 1 100% 0%
Getting the opposition out quickly
Try bringing the medium fast or medium bowler on. Then, place the bowling marker just short of the good length spot or even further down towards the bowler. Try inswing ball or outswing but drop the speed to almost nil. Keep the speed to two or three lines (yellow meter). The batsman will play a backfoot defensive shot and eventually get bowled or LBW. 

A second way of getting the batsman out quickly is bring the medium fast or fast bowler and try bowling inswing bouncer and place a fileder at deep thirdman for a catch. This trick only works when the batsman is new to the crease or tailenders. 

Keeping the scoreboard moving or hitting some runs 
Always bring the left handed batsman first and aim for the leg side boundary for six hit shot. He will succeed many times. 

In test matches, do not rush for runs or you will get out very quickly. Place your innings and play the ball in the gaps.

Votes: 0 0% 0%
Get batsmen out fast
Bring in a fast bowler (for example, McGrath) and aim a normal delivery behind either the middle or the off stump. Put the bar up to almost full power and let her rip. Most batters will swing and miss or be caught LBW. 

When bowling with someone who has a slower ball (for example, McGrath put the pointer as near to the bowler as possible, then put the pointer just to the left of the umpire. Put the power to two yellow bars. Then watch them walking in and out of the Pavillion.

Votes: 0 0% 0%
Easy six
When the ball is pitched just in front of your leg outside offstump or towards middle stump, sweep it through the legside by a powershot. Most of the time the result will be a six.

Votes: 0 0% 0%
How to make the opposition out in 20/20 matches
Normally in 20/20 cricket in this game when you are playing against a strong team like Australia they remain in 15 overs at about 130 for no loss. But to make all the batsmen out quickly after 15 overs choose a pace bowler( For example Irfan Pathan ) and place the ball mark after the middle stump and make tsure the ball speed is full. Then the batsmen will become bowled or caught at long on or Long off. 

Note: 
1. This will only work on pace bowlers 
2. this might only work if the game is et in easy mode

Good Luck