Question about Car Audio Receivers

1 Answer

Were do you connect the bluetouth wire for mute in order for when the phone ring the musice stop and the phone ring

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To a ground

Posted on Mar 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How does the mute function work on the Kenwood KDC-5043U. Where do I connect the brown mute wire? I have a Samsung Galaxy S5


If you were installing a separate hands-free phone kit along with the Kenwood head unit, you'd connect the Kenwood mute wire to the muting output on the hands-free kit. This allows the other device to mute the audio from your radio while you're using the phone. If you don't have a hands-free kit, you wouldn't connect the Kenwood's mute wire to anything at all.

Jul 25, 2015 | Kenwood Car Audio Receivers

1 Answer

I have a kenwood stereo and im trying to install it but whenever i play my phone through the aux cable it stops and says "call" on the screen. Its an older vehicle so i didnt hook up the brown "mute" wire...


You shouldn't need the mute wire. That is only used to temporary mute the audio, if you do get a call and need the music off.The aux is only for line level audio input. I think your phone goes above and beyond what the radio can do. Sorry.

Dec 30, 2014 | Kenwood Car Audio Receivers

1 Answer

Have clarion cz200 receiver hooked it up it powers up and everything just fine but no audio...checked everything and it seems fine but no audio am i missing something? its in a 1981 chevrolet c10 pick up


With this particular unit you have a Tele mute which is cell phone related to mute volume when your cell phone rings if this is grounded then you have a problem.

1) Verify that the speakers of the vehicle are correctly hooked up , you can test your speakers by taking a 9 volt battery and touching the positive and negative leads of the speaker wires (make sure they are disconnected for radio) you should hear a click.

2) Take a volt/ohm meter set it to ohms touch the leads together this is continuity. Next touch the wire leading to the speaker to be tested and place the other lead of the meter to the bare metal of truck. If the needle pegs all the way over you have a shorted wire.

3) If using a seperate amp to power the speakers you need to insure that all connection to the amp are made properly and grounds are correct.

here is a link to clarions website to provide a troubleshooting manual.
http://www.clarion.com/us/en/MungoBlobs/341/106/CZ200_EN.pdf

One other thing to check is the center channel balance as if it is biased you need to adjust it.

There are only a few simple things that can cause no audio output
1) Volume not correct
2) Audio output connections incorrect
3) Speaker wires are bad
4) damaged speakers
5) tele mute is grounded
6)Speaker wires insulation is cut and grounding out or is not making a good connection
7) worst case Radio is defective ( it happens)

Mar 08, 2011 | Clarion CZ200 Car CD USB MP3 Player

1 Answer

I have this Radio on my boat and the Mute keeps coming on and off with out being touched what do I do?


some radios came with a cell phone hook up so when cell ring radio mutes. There is a wire for this in radio harness. Maybe touching something to do this.

Jul 23, 2009 | Kenwood Car Audio Receivers

1 Answer

Kenwwod Cd Player


there is a wire on the harness (pink or brown i think) called cell phone mute. if this wire is touching power or ground or any other wires you will have these problems. make sure this wire is taped off and secured behind the dash.

If it was hooked up intentionaly it will mute your stereo anytime a call comes in on a cell phone.

Aug 04, 2008 | Kenwood KDC-MP528 CD Player

1 Answer

Also


Check the TEL mute wire(brown) properly insulated if you havn't connected any cell phone. If this TEL mute wire touches car metal body, there may be a chance to display "CALL" on the display.

Jan 16, 2008 | Kenwood KDC-MP435U CD Player

1 Answer

Pioneer head unit


You have to have a "Car Kit" installed for your cellular phone, either Bluetooth or not. It would have a wire that would be connected to your Head Unit to enable the Telephone Mute or Att, as you choose.

If you dont have a car kit, it is of no use to you.





Best of Luck.

Nov 14, 2007 | Pioneer DEH-P6900UB CD Player

3 Answers

CD player that doesn't play


I had the same problem.
I cut the orange wire which went into the black connecter block
and WOW I had sound...
brilliant
thanks a lot
Andy - North Yorkshire, England

Oct 11, 2007 | Panasonic CQ-C1303U CD Player

1 Answer

How to mute the radio


Here is the link for the user manual for the arx 4570 which is similar; (sorry exact model manual not available that i could find) http://www.clarion.com/us/en/MungoBlobs/704/514/ARX4570(Manual).pdf For this model - the only ways you can mute it are by using the mute button on the set or on the remote control. Hope this helps - please ask again if not :)

Apr 18, 2007 | Clarion ARX4670 Cassette Player

Not finding what you are looking for?
Car Audio Receivers Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...