Question about Toshiba e-Studio 350 Copier

2 Answers

Toshiba Estudio 350

Is there a way to reset all the settings to factory default on this printer?

Posted by on

  • dale_lawson Mar 08, 2009

    Unfortunately Sir I am not a Dealer I am A soldier Deployed in Afghanistan and we have no printer dealers here in the war zone. But thanks anyway. I cant seem to get into the User tool menu

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have an e-studio 350, we lost power and when the power came back on it went to call for service mode. I tried to tun it off and unplugged the unit but it still came up with same call for service mode. Unfortunately I dont have the money for a service call and would hope that there is a simple solution. can anyone help???

Posted on Jul 24, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 136 Answers

Yes absolutely, however do you know how to get into the Servie Mode ?

if not you can try to " USER TOOL" if you go into it you can select reset to factory reset' I can Not tell you how to go into the service mode, since I am not sure your a Toshiba Dealer like our company, I can not devolve that knowledge Sorry , if your not in Ct then we can not assist you further.

Posted on Mar 08, 2009

  • copiersplusw
    copiersplusw Mar 10, 2009

    Yes their is , I am not sure if I am allowed to do this, in order to reset the factory resettings to factory default. you'll have to go into service mode: go tohttp://www.copierspluswwllc.com. You can either send us or fill out the contact page inorder for us to assist yo., I do not want to provide that information on this site. As I am A Service Manger myself. I don't want people solve or tempting to repair these units themselves. Like I wouldn't want to do your job, your were trained to your job just like me. So go to the site indicate the problem your welcome to call. if you wish which is easier but, that will be up to you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not make wifi connection with printer


If the printer is wifi ready, (you did not post the model number) then most of them require you connect them with a cable to the computer and set up the printer for wifi.

Jan 10, 2017 | PRINTER Office Equipment & Supplies

1 Answer

My Dell 3115cn printer will not connect to the network (it still works on USB cable), hard to believe it's broken, so can the printer system be reset?


Try turning off the printer and disconnecting power plug from wall. Hold power on button for about a minute. Then replug unit and turn power on - it should then attempt to hook up to your existing network.

If no go, try reinstalling the software that initially came with printer and was used to set up the network

Jan 10, 2017 | Dell Office Equipment & Supplies

1 Answer

INSTALL PRINTER TO LAPTOP


Which type of printer do you want to set up wireless or USB ?

Jan 10, 2017 | PRINTER Office Equipment & Supplies

1 Answer

Toshiba e-Studio 456 Error Codes F901


The challenge is with the speed of LGC is not corresponding to the model of the machine installed now try to check it if theres no harness for connecting to the connectors of LGC Board of CN311 and CN316
toshiba-e-studio-556-error-codes-f901-iby3lvzc0tbxrdjcbrfpd0co-1-0.jpg

Jan 09, 2017 | Toshiba Office Equipment & Supplies

2 Answers

Toshiba estudio 455 Error Code E030


E030 indicates jam error on exit...U need to see where the paper stop and why...

Jul 28, 2015 | Toshiba Office Equipment & Supplies

1 Answer

I have a donated photocopier for the scout group and it has a code which no-one knows. Speaking to an IT Engineer we should be able to rest to factory settings. We have tried Admin as user name and admin...


Really depends on the model/maker.
Sharp photocopier? try one of those: (note the capital A and S )

Login Name: Administrator
Password: admin
or

Username: admin
Password: Sharp

Oct 02, 2014 | Office Equipment & Supplies

1 Answer

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


The default password is either 12345 or 123456.
If neither of those work then, turn machine off then power on while pressing the 0 & 8 keys then enter 263, then press Start. It will then display the Admin Password.

Mar 17, 2014 | Toshiba Estudio 200L Copier

4 Answers

Forgot password toshiba estudio 450


The default password is either 12345 or 123456.
If neither of those work then, turn machine off then power on while pressing the 0 & 8 keys then enter 263, then press Start. It will then display the Admin Password.

Oct 23, 2009 | Toshiba Estudio 200L Copier

2 Answers

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


restart machine ,then press the 0 & 8 keys,enter 263, then press Start. You should see admin password on the screen.

May 05, 2009 | Toshiba Estudio 200L Copier

2 Answers

Samsung kicked out hp 3in 1 printer already installed


Don't have your HP designated as the default printer (if possible)when you hook up the Samsung. When the Samsung is hooked up it sees the HP is the default printer. Well it can't have that, they discard the HP drivers. What does Samsung care about HP drivers theres only one printer port setup and thats the USB port you have them sharing. So yes you need to get a second cable. Tim

Jan 29, 2007 | Samsung SPP-2020 Thermal Photo Printer

Not finding what you are looking for?
Toshiba e-Studio 350 Copier Logo

1,018 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

pkwc

Level 2 Expert

254 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...