Question about Toshiba Satellite Pro M10 Notebook
You need to build a hardware device that plugs into the printer port.
Get a 25 pin male D sub connector, and solder various wires
to the pins numbered below. The pins on the connector are numbered 1 to 25
For a picture of this hardware device (dongle) go to :-
Connect these pins together by soldering thin insulated wires to the following pins :-
Plug the dongle in the printer port and boot up the laptop, you will then be able to bypass the BIOS password and go into the BIOS to reset/remove the password.
Posted on Mar 08, 2009
Tips for a great answer:
Jun 08, 2016 | Toshiba PC Laptops
Aug 30, 2013 | Toshiba Satellite Pro 4600 Notebook
Apr 23, 2012 | Toshiba Satellite M35-S320 Notebook
Mar 07, 2012 | Toshiba Tecra A8-S8513 Notebook
Jan 22, 2011 | Toshiba Portege S100-S1133 Notebook
Sep 16, 2010 | HP Pavilion zt1000 Notebook
Dec 31, 2009 | Toshiba Satellite L45-S7423 Notebook
May 27, 2009 | Toshiba Satellite Pro A200-EZ2204X...
Nov 18, 2008 | Toshiba Satellite A135-S2276 Notebook
Oct 21, 2008 | Toshiba Satellite A135-S2386 Notebook
Apr 29, 2009 | Toshiba Satellite Pro M10 Notebook
305 people viewed this question
Usually answered in minutes!