Question about Onkyo TX-SR705 Receiver

1 Answer

Onkyo TX-SR706; Turntable output only from one speaker

Brand new Onkyo TX-SR706. Turntable output only comes out of one front speaker. Appears that one of the phono inputs in the receiver is faulty? Anyone ever heard of this issue or have thoughts re: another problem vs. faulty input?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 98 Answers

Try some troubleshooting to check whether its the turntable or the the receiver.

What happens if you exchange the output cables of the turntable from left to right. Does the problem shift?
Does the sound changes from left to right speaker?

Similarly try on the inputs of the Receiver.. does the problem shift...?
This way you will be able to isolate the problem, whether with the receiver or the turntable....

Let me know, we can trouble shoot it further....

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find the remote code for a Samsung Blu-ray Disc player, BD-5900?


Please follow this link to the remote control codes for the TX-SR706, http://filedepot.onkyousa.com/Files/own_manuals/29344636A_Remocon_CodesA.pdf?from=local, Thanks, JT

Dec 16, 2015 | Onkyo TX-SR706 Receiver

1 Answer

How to fix Onkyo AV Receiver Model: TX-SR706 no sound problem


Hi Shaun, the unit would have to be taken to one of our authorized service centers for repair as you have already tried the reset. Please follow the link below to our Authorized Service Center locator, http://www.onkyousa.com/Support/servicecenterLocator.php?source=globalnav, if you have any other questions or concern please feel free to email me at askOnkyo@us.onkyo.com, Thanks, JT

Jul 13, 2015 | Onkyo TX-SR706 Receiver

1 Answer

Trips and switches off


Hello Fixya customer,

Thank you for your question.

The best way to fully isolate the fault is to disconnect all the speaker wires, and verify that there are no strands of wire shorting between the speaker terminals on the rear of the unit.

Turn the volume all the way down, full CCW, and if it goes into shut down with the STBY light blinking then there is a fault in one of the amplifier's.

Thank you for using Fixya, and if I can be of further assistance please ask.

May 01, 2010 | Onkyo TX-SR706 Receiver

1 Answer

Sony PS-LX200H turntable plugged in to Onkyo TX-8211 inputs


After a few years it may be time to consider a new cartridge for the turntable. The current one may have given up the ghost. You might also want to check that the output cables from the turntable to the receiver are firmly plugged in. They may have come loose if someone was moving things or cleaning. Yet another thing to consider is the input on the receiver may not be working. You can test this by plugging in a cable with RCA plugs on both ends and touching the pins on the unconnected end. If the input's okay you'll hear a hum.

Probably it's time for a new cartridge. They don't last forever, especially if you, like me, are someone who still plays a lot of old vinyl!

Please take a moment to rate this solution a fixya if it's helped get you going, and thanks for asking here!

Mar 12, 2009 | Onkyo TX-8511 Receiver

2 Answers

2 month old ONKYO TX-SR706 speaker circuit problem


This is a problem with the surround sound processing. Effectively the digital signal is not being processed properly. Since this unit is so new, return it and request either an exchange or at least warranty service. The DSP board will likely be replaced.

Dan

Feb 16, 2009 | Onkyo TX-SR605 Receiver

1 Answer

Onkyo TX-SR706 monitor out


Monitor out is non assignable.  Monitor out is for the purpose of putting your selected devices audion and video out to the television or display.  For assinment of out putting different devices that what you are listening to on the main stereo unit you need to have a 2nd room or zone output.

Jan 09, 2009 | Onkyo TX-SR705 Receiver

2 Answers

No power


When an amp won't come out of standby mode when you try to turn it on at the receiver, there is usually a problem in the output section (shorted outputs) and the amp may also display something like "protect" on the display if it has one. There could be lots of other causes but outputs are the first thing I'd look at.

If its brand new, then return it for a refund.

Nov 19, 2008 | Onkyo TX-SR705 Receiver

1 Answer

Onkyo Tx-SR55


did you swap the left from speaker with the left front?
if still crackels after that them you have bad left output.

Jan 09, 2008 | Onkyo TX-SR500 Receiver

Not finding what you are looking for?
Onkyo TX-SR705 Receiver Logo

533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio & Video Receivers Experts

D. E. Hev

Level 3 Expert

1059 Answers

gbob59

Level 3 Expert

2963 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Onkyo Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...