Arcobat Reader/2 printing problem

I had my first opportunity to use this the other day. I downloaded
Wendy's International Annual Report and tried printing several pages in
the middle. AR/2 said it would print pages 18-21, which amount to pages
14-17 on the actual document (page numbers), but always printed
pages 9-12, (5-8 page numbers in the document).

I finally had to print "current page" while looking at each page.
Anyone else experience this?
Where should this be sent to at adobe for their information?
The .PDF file came from
#

Thanks!

David
--
David H. Sherrod #
Porquete se acerco' cautelosamente a Puh por detra's. <<!Puh! <<?Si', Porquete? <<So'lo queri'a estar seguro de ti.>> - A. A. Milne

In my case, with a HPIIIP (4 MB RAM), the pages were right side
up, but reversed side to side. I'd have to look at the page in a
mirror to read it.

Gerry

In <>, (Joe Stevenson) writes:

In message <5371hd$@news-s01.ca.us.ibm.net : : : : : : : : : : : : : : : : : : : : : : :
I just installed Warp 4.0, and the printing problem went
AWAY!
I guess the new OMNI drivers work better

JoeS/2

In message <5322h7$@nnrp1.news.primenet.com : : : : : :
I got the same effect with an Epson Stylus 800+. It seems that they know
about this problem. Hopefully, the next beta will come soon

JoeS/2

Works okay here, but uses tons of printer memory; I don't have that so
I had to drop down to 300 DPI. I'm using a Lexmark Optra E with just a MB,
with which I seldom (Adobe is the first) have trouble at 600 DPI. This
probably reduces the print rate from 6 to half that. Memory costs too
much for this printer, but otherwise it, Acrobat, and OS/2 do okay.

--
. .
: Quality Toolkits and Applications for :
: DOS - Win16 - Win32 - OS/2 : #
: : BBS:1-210-684-8065