Question about LG 50PG20 50 in. Plasma HDTV
THIS PHENOMENON IS A CHARACTERISTIC OF PLASMA TV SETS...KNOWN AS DIFFUSION ERRORS OR COMMONLY..SPARKLING...ON LG SETS...THE PANEL VOLTAGES MUST BE CHECKED AND ADJUSTED IF NOT WITHIN .5 V...PLUS OR MINUS..Vs...and Va...THE OTHER ADJUSTMENTS ARE ON THE Y-SUS BOARD..Vset DOWN...Vset up...RAMP up...RAMP down...these should be adjusted by professional tv personnel with experence...JOE ACE
Posted on Jun 27, 2008
When you boot up your tv for the first time, you get to choose between home and shop-mode.
In your case, he TV is set to "shop-mode".
Then it will go back to factory settings after 5-10 minutes. (so that customers won't mess up the settings all the time)
So change the settings from shop to home, and your problem is fixed!
Posted on Mar 01, 2009
SOURCE: LG 37lc2d
Check for a popped capacitor on the power board. They are the round tube looking things with a cross or cross type shape on the silver flat top. Check they have not leaked and are still flat topped. The one your looking for is about 8mm diameter on right hand board. Take the back off, i suggest putting it face down on a mattress with a blanket support. Take care not to lean on it. When the backs off you will see 3 circuit boards the power board is the smaller of the 3 on the left, looking from behind. Good luck.
Posted on Oct 05, 2009
Tips for a great answer:
Feb 14, 2017 | LG 60PA5500
Jan 13, 2016 | Samsung Televison & Video
Aug 02, 2015 | LG 50PJ350 50 inch HD Ready Plasma...
Jun 15, 2013 | LG DU-50PX10 50 in. Plasma HDTV
Mar 22, 2011 | LG 42PG20 42 in. Plasma HDTV
Nov 22, 2009 | LG 50PX5D 50 in. Plasma HDTV
Dec 31, 2008 | LG 42PX5D 42 in. Plasma HDTV
Oct 25, 2008 | LG 42PX5D 42 in. Plasma HDTV
May 03, 2008 | LG MZ-42PZ14 42 in. Plasma Television
378 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: