- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most radios have universal wires for the most part.Yellow is 12volt constant power,red is switched power(accessory)black is ground. the 2 gray wires are right front speaker(black stripe is always negitive) the 2 white are left front purple is right rear green is left rear orange/white is illumination
your ground would be black
yellow is constant battery power
red is acc switch from ignition.
blue is remote turn on for amplifier
green pair white pair purple pair and grey pair are all speaker wires. FR FF RF RR etc
The Red wire is your (+) Positive that connect's to the power source The Black wire is your (-) Negative that connect's to the ground The Orange wire is your Auxillary (+) that turn's on Amplifier's or Power Ant.
You should have a Green wire, a Green wire with a White stripe,a Gray wire, and a Gray wire with White stripe
The Green wire is the LEFT channel input (+) The Green/White wire is the LEFT channel input (-) The Gray wire is the RIGHT channel input (+) The Gray/White wire is the RIGHT channe (-)
(BE SURE THAT YOU CONNECT THE RED (+) AND BLACK(-) WIRES BEFOREYOU CONNECT THE ORANGE WIRE TO AN AUX SOURCE OR YOU WILL BLOW THE INTERNAL FUSE !!!)
PS. I have no idea where that White wire you mentioned goes.
top left - orange.....goes to aux or memory wire top right - blue.......goes to the remote wire used with amps bottom left - black.......goes to the ground wire bottom right - red........this goes to your hot wire
red - power Black - Ground Blue/Black - rear Left Speaker Positive Blue - Rear Left Speaker Neg White/ Black - Front Left Speaker Positive White - Front Left Speaker Neg Brown/Black - Rear Right Speaker Positive Brown - Rear Right Speaker Neg Yellow/Black - Front Right Speaker Positive Yellow - Front Right Speaker neg Green - Left Input Positive Green/White Left input Neg Gray Right Input Positive Gray/White - Right input Neg
1. bottom right( red wire 12 v dc on/off ignition switch)
2. top right( blue wire with inline fuse to amplifires)
3. bottom left( black wire ground)
4. top left( blue wire stereo remote wire)
I have a pdf photo diagram I made just e-mail me and ill send it to ya. hope this helps