Question about Saeco Odea-Giro Espresso Machine

1 Answer

Saeco Odea Giro - Clogged and coffee come out in water tray....

Hi, I have a Saeco Odea GIRO and in the past few days it has ben brewing out less and less espresso than it usually did. Right now the coffee actually does not come out from the spout at all and it gets dispensed into the water tray on the side, usually making a mess all underneath the machine. I took out the brew group (I believe Thats What Its Called) and tried to clean it under the water and it still didnt work. I let the brew group soak in warm water for an hour or so and still no luck. The coffee just wont come out of the two little spouts. I also cleaned out the 2 holes of the spout and tried to **** the line free of any coffee or dirt a.d still no luck. This is the second time this happened. The first time I sent the machine back to Saeco and they sent it back fixed saying that it was clogged, but when they sent it back to me the tray broke, so they kindly sent me a new machine. Now the new machine has the same problem afetr 1 descling and 4 months of 1 to 3 cup a day use. What do I do to unclog it?Thanks!

Posted by on

  • Anonymous Mar 27, 2014

    My dad poured brewed coffee back through the brewer, less then half the water comes through at a time now. How can I unclog it?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This has happened to our machine that we use for our youth group. We sent it in and they said it was clogged also. Not having a clue what they meant. It happened again and I figured it out. When you remove the brew group there is a hole just above it that dispenses into the brew group. Make sure it is not clogged. Give it a try Good Luck

Posted on Apr 06, 2009

2 Suggested Answers

mirran
  • 515 Answers

SOURCE: Water flows from steam spout

Hi,

you have to take it to a Saeco service center to replace a gasket in the steam valve.

Posted on Jul 11, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Saeco Giro that leaks coffee under the machine


check the brew unit .there is something wrong with "O" rings

Oct 07, 2014 | Saeco Odea-Giro Espresso Machine

2 Answers

I have a Saeco Odea Go and my puck in the dreg drawer are really wet and I have water leaking (brown so with coffee) under the dreg drawer. how I can fix it ?


I recently had this problem. I throughly cleaned and lubricated the brew group as directed by the manual. Apparently if the brew group doesn't move smoothly enough it won't grind the correct amount of beans. Try lubricating and then brewing 2-3 cups to have the machine recalibrate the grind amount.

Jan 12, 2011 | Saeco Odea Go

1 Answer

We have an Odea Giro in the office. When we got it I remember the coffee tasted amazing. After few months the taste started to decline and after some time we stopped to use it altogether. I wanted to...


you are supposed to go through the "before first use" instructions....which include filling the resevoir with water and brewing only water until its all gone. then start using the machine normally...remembering that the machine takes a few brew cycles to adjust properly to the coffee being used (this assuming this is the giro plus model which has the feature-"aroma something or other...)

also, descaling would help and removing the brew group and rinsing it out...

Nov 23, 2010 | Saeco Odea Giro Plus Coffee Maker

1 Answer

The coffee grounds lihgt and the descale light flash after I push the brew button on my seaco odea giro.


Same problem here. I've googled and see that there are many people with the same problem but no clues about how to solve it:

My Saeco Odea Giro is flashing two lights alternatelly (Dregdrawer Light and Descaling Light). What's the problem and how can I solve it?

Aug 10, 2010 | Saeco Odea Giro Espresso Maker -...

2 Answers

Hi, I have a saeco odea giro plus that has just started to leak nearly all of the brewed coffee into the dreg drawer! Any ideas? thanks in advance...


I had a crack in the tube that connected to the brew group that resulted in a similar dumping of coffee in the dregs (and below the dreg drawer and onto the counter) in my Saeco Odea Giro. Replacing the "Saeco Odea Giro Coffee Dispensing Tube, part number 11003468, fixed my problem. You can replace this yourself if you are very handy. These photos are very helpful (The Go seems pretty similar to the Giro.) http://odeago.zxq.net/Odea_Go_Repair/Welcome.html

Aug 04, 2010 | Saeco Odea Giro Plus Coffee Maker

1 Answer

Saeco odea giro is not grinding enough coffee.. the pad is like half or less than that.. it seems like a pcv problem .. HOw can I reset or reprogram to grind more coffee?


Hi,..These saeco models have a auto adjusting grinder. If the brewunit is heavy or in other words overloading, the machine will reduce the grinding time lesser to produce less ground coffee.If it senses the brewunit is smooth and light in loading (compressing the grounds), it will increase the grinding until it reaches the optimum dose. So it is important to clean and lubricate the brew unit at all times. Hope it will solve the problem. Good luck.

Jun 18, 2010 | Saeco Odea-Giro Espresso Machine

1 Answer

New Saeco Odea Giro machine not working


That is the machine is saying to empty the drip tray, pull out the tray on the side and wait until the red light start flashing then put back the tray.

Dec 24, 2009 | Saeco Odea Giro Plus Coffee Maker

1 Answer

Machine stoppped working


Try this remove the brew unit and clean the screen on the unit, then insert unit, and open steam/hot water valve to prime. If that does not work then there might be a malfunction with the pump, I am assuming that the machine is only 2 weeks old?

Jun 25, 2009 | Saeco Odea Giro Plus Coffee Maker

2 Answers

My Saeco Giro keeps flashing red, what's wrong?


Hold the water button in for about 15 seconds.

Mar 30, 2009 | Saeco Odea Giro Plus Coffee Maker

1 Answer

Saeco Odea Giro - Watertank


Yes that is perfectly normal. It has to have enough for a long coffee or steam. So it always has some to spare in the tank.

Dec 02, 2008 | Saeco 00034 Incanto Sirius Super Automatic...

Not finding what you are looking for?
Saeco Odea-Giro Espresso Machine Logo

1,459 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

eyecam

Level 2 Expert

86 Answers

Ray Murphy

Level 2 Expert

67 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...