Question about Sport & Outdoor - Others

2 Answers

I need a Marksman Repeater 1010 schematics/assembly manual.

I was using the gun and misplaced it and when i found it, the gun it was locked-up and I took it apart to clean it, yet now I can not figure out how to reassemble it.

Posted by on

  • dude79 Apr 02, 2009

    i was useing my gun and it didnt work so i took out the three screws and the loding part had a bb jamed in it so i got that problem fixed so now the safty lock and the trigger wont come back into its place and i dont know how to fix it

  • Anonymous Apr 05, 2009

    took my gun a part and now i cant put it back together again.

    Need a Manual/ assembly guide for a marksman repeater



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Posted on Dec 09, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer


Posted on Apr 03, 2010

  • 1 more comment 
  • fuxthadeal Nov 26, 2010

    @imagin73 if u don't have a real solution you shouldn't post anything. i've been looking for the same schematics/ assembly manual as johnathanalo and i thought someone actually had an honest answer to his question. you don't have the answer and you're obviously not smart enough to find a real solution to his problem so stop posting if you don't have any useful answers

  • jecooper51 Jan 01, 2011

    I agree. I want to fix my gun, not throw it away. I need the barrel seal / tube for my gun and can't find on any were.

  • Terry Schiele Mar 29, 2013

    Justin, Thanks for your answer and video here. I had figured out all but that front spring on a pistol that did not work. The trigger spring was in differently as I took it apart and other pics had it in otherwise which would never work. I wish I could put this video up again for others to use. I have seen so many people looking for answers and I feel lucky to have found yours. Thanks again my friend. Terry



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is my Marksman Repeater a pellet & BB gun

yes it takes .177 BB's which is also the size of pellets, plus darts and bolts.

Sep 07, 2015 | Optics

1 Answer

Need assembly instructions and diagram fo a crossman air gun model number 1008sb .177 cal. Pellet repeater

Follow this link Steven, if you haven't found it already.

Both manuals are about 3/4 way down toward the bottom. Hope this helps.

Jul 28, 2014 | Optics

2 Answers

Marksman 44-1c Cal 4.5 (.177) Spring loaded Pellet gun

All I can tell you is that Beeman is the maker, and Marksman is just a model.

Apr 12, 2014 | Optics

1 Answer

Parts schematic marksman repeater pistol

This is easy to disassemble but take careful notes/ pictures as you go because the springs have to be in the right places.

Oct 21, 2013 | Sport & Outdoor - Others

2 Answers

How to put in co2 cartrige in a.177 cal 4.5mm

Hi wendyavery...
The Marksman 2000K does not use CO2 cartridges, it uses a spring to act as the "power plant"
Go to the following webpage and check it out
Please rate me

Oct 06, 2012 | Marksman 2000K Air Pistol - 0.177 Caliber...

1 Answer

How do i load my marksman repeater .177cal?

If it is a pistol, **** the gun, put it on safe and then push on the button just below the barrel at the muzzle and it will flip up. The top hole is for bbs and the bottom for pellets and darts. Do not load both.

Dec 04, 2010 | Sport & Outdoor - Others

1 Answer

How do you load BB's in Marksman repeater 177 cal pistol (hand gun)

1) If you have sucessfully released the safety lever, grab the textured black grip of the cocking mechanism and pull it back until it locks into place.
2) In a safe manner, hold the pistol by the handle with your left hand and carefully grab the black plastic sighting mechanism at the end of the barrel with your right hand and pul this black tip end of the pistol downward. You should find that the other end (which lies more mid-barrel) will pivot upwards, giving you access to the loading tube.

Feb 03, 2010 | Marksman X7 Extreme 3-Channel Remote Start...

1 Answer

Trying to take apart a crosman marksman repeater 4.5mm to clean. the bolt action will not come off. any suggestions?

Turn the gun upside down and look at the back of the bolt action. Now take a flat head screwdriver and pop out the little gold piece. walla. youre done"BEWARE" i did this and i cant find the manual for the pieces.

Apr 06, 2009 | Sport & Outdoor - Others

2 Answers

Marksman 1010C repeater air pistol

sorry if you already learned but you have to **** it, and at the front under the barrel exit is a button looking shape press down on that really hard and on the top of the gun a sloped shape should appear. do not put the bb in the circle shape hole put the bbs in the top square shaped hole. push the object down and aim then pull the trigger!

Sep 08, 2008 | Sport & Outdoor - Others

Not finding what you are looking for?
Sport & Outdoor - Others Logo

Related Topics:

4,399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sport & Outdoor - Others Experts


Level 3 Expert

77514 Answers


Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

16644 Answers

Are you a Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides