I have an Epson LCD projector model EMP-830. The unit was was dropped and now it will not focus the top and bottom of the screen at the same time. I suspect the lens assembly or focus control got knocked out of alignment and needs a little adjustment. The projector was easy enough to open, but I don't see any way to make an adjustment. Nothing looks like it's been knocked loose or bent. Any ideas on how to adjust this to get the screen to focus properly?
-   I have an Epson EMP 3300 with a similar problem. When it is on I cannot find a way adjust the focus to include the whole image on screen.-   Guest
Solution #1
posted on Aug 02, 2007
Ross - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
you have knocked the lens or mirrors out of alignment. off to the repair center you go. even slight misalignment causes problems.
i lost my remote control to my power lite s6 projector n locked it. Now i don't no how to get it...
(More)
i lost my remote control to my power lite s6 projector n locked it. Now i don't no how to get it unlocked.