Question about DFI LANParty UT RDX200 CF-DR Motherboard

1 Answer

I have a hp pailion a1610n system

The problem is when i turn on the pc i see the fan is working but the screen never coming on, i wuod like to wno if is the motherboard problem or what?

Thank if you can help me.

J Reynoso

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 164 Answers


When the PC is switched on; can you hear any beeps? and please count the number of Beeps and let me know.

Also, does your PC have an internal graphics card or external. Either way sometimes the Graphics card might be faulty. do you have a spare Graphics card to test with?

I hope this helps,


Posted on Mar 07, 2009

  • mohammed naseer
    mohammed naseer Mar 07, 2009


    When the PC is switched on; can you hear any beeps? and please count the number of Beeps and let me know.

    Also, does your PC have an internal graphics card or external. Either way sometimes the Graphics card might be faulty. do you have a spare Graphics card to test with?

    I hope this helps,



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

System fan cannot be detected in MS 7352 V1.0

Hello here is the homepage:

The bios is set to give a warning when the system fan is not working or goes dead (in this case it probably isn't detected or has gone out). You should be able to get into your bios and look for items such as "processor fan warning: on/off" "system fan warning: on/off...etc. If you turn the system fan warning to off it will resolve the problem you are having. The fan for the cpu, must be connected to the CPU_FAN connector on the mainboard.

If the problem is still there, replace the fan, and renew the thermal paste, between the cpu and the cooling element.
Clean also the pc out for dust, with compressed air.

BE CAREFULL when you work on the mainboard, and please take antistatic precautions.

Visit also a computer repair shop, if working on the mainboard is unfamiliar to you.

Good luck

Jan 19, 2013 | Intel Computers & Internet

1 Answer

I have an HP Pavilion a1730n. For the past 5 times I turned it on, I received an error message Error: The System Fan Has Failed!Service PC to prevent damage to the system.PressF2 to Continue I ran HW...

1. Check if fan is spinning. If not, replace with new one or check cables.
2. Check if there are no swapped fan connectors when reconnecting mb cables.
3. Check BIOS update on HP website. Choose your OS here:
4. Check for a BIOS setting for disabling the fan monitoring.
5. Install a monitoring app which reports fan speeds and temps. See
6. Check if CPU fan works.

Mar 14, 2011 | Computers & Internet

1 Answer

Received 512 - chassis fan error on HP Compaq dc5100 ff - I replaced the front chassis fan after detecting fan was not working now when I attempt to log into windows - windows screen appears than...

if you download and install tune up 2010, it may fix your registry automatically for you however if it fails to, your operating system will continue to fail to shutdown or keep causing your system to hang at the f5 window which is the one your describing. Device drivers are very well known for causing this error and if you have installed a new device and your computer is not picking up the new device properly, then the computer will not shut down. There are several forms of viruses that cause the system to stay on, power problems may cause the system to crash during a storm and thus damage the computer registry. A system defragmentation, cleanup, along with a registry clean would be the first best ideas.

Jan 12, 2011 | Computers & Internet

1 Answer

Computer will not come on loud sound from pavillion repeats it self. The fans will spin and the blue light on pavillion comes on. moniter screen will not come on the power light is on

On some computers, when you turn it on, the fan starts to run at 100% of its speed, i.e., very noisily.
Then, when it is detected that the computer is functioning, and _not_ over-heating, the fan will slow down, and quiet down.

So, what is the nature of the "loud sound" ?
Continuous? Beeps, in some pattern?

Take the computer to a qualified technician, for better trouble-shooting.

Jun 09, 2010 | HP 417035-001 - HP Pavilion dv2000 Series...

2 Answers

Hp pavilion dv2000 lights switch on but boot or


Thank you for your query

Please try the folowing

1) Remove ALL wires and then press and hold the power button in for approx 20 seconds

2) Plug everything back in and then rerty

This may sort the issue out however from what you are descrbing, if there is no boot or display it is highly likely the motherboard and/or the CPU is faulty

I would recommend that you book the PC into a reputable PC repair shop if the above does not work

If this has been useful please leave postive feedback/vote/testimonial - Thank You Again

Feb 15, 2010 | HP 417035-001 - HP Pavilion dv2000 Series...

1 Answer

Sir i m getting a massage when start computer t have a p3 . with motherboard hp b10900 & cpu pentium 3 800 EB. 0242 : CPU fan is not connected properly please switch off your pc and place the connector of...

you have to do exactly what the system is saying Your CPU fan connector is loose or there is a problem with your CPU fan if You are well-versed with the hardware part of the system you can do it yourself Or call Your PC administrator or who repair Your PC

Dec 01, 2008 | HP (D7580-60003) Motherboard

1 Answer

Emachine t3882 will not boot

there is a big possibility that your System fan is damaged or worst is that it's your CPU fan that is not working properly. If you can still enter the bios by pressing F2, try to check your settings and disable fan control for the system fan. If the problem persist then you need to replace the CPU Fan.

Hope this helps.
Please vote if it does. Thanks!

Apr 11, 2008 | Intel D865GVHZ Motherboard

1 Answer

Computer won't power up

the wiring isnt the problem i dont think, as the system wouldnt have started in the first place, the message would have read NTLDR not found, this means that the processor cannot find the system files to load windows and that there is either a hard drive fault or a system fault. If you can get into the bios you need to change the first boot device to cdrom and start the system up using your XP disc and do a system repair.

Aug 24, 2007 | AOpen s760GXm-US Motherboard

Not finding what you are looking for?
DFI LANParty UT RDX200 CF-DR Motherboard Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top DFI Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Columbus Makubika

Level 3 Expert

527 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a DFI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides