Question about Canon i950 InkJet Photo Printer

1 Answer

I have a canon s9000 and am getting the following error code: 1 green light followed by 7 orange lights, then repeats. Any help appreciated peter

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This is indicating a defective print head.

Remove and reinstall the print head. If this does not resolve it, then you will need to look at getting a new print head.

Posted on Mar 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, My Canon BJC 3000 printer has the orange light flashing 7 times, followed by 1 green light. What does this mean and How can I fix it?


Hi,

7 orange followed by 1 green means Cartridge Error.

If you have recently replaced the ink cartridges then please check that they are installed properly and re-seat them if necessary.

If you have not recently replaced your ink cartridges then check the ink levels using the software that came with the printer.

Try replacing the ink cartridges and if that does not solve the problem then you can contact Canon support.

The details for Canon support in the UK can be found here:
http://www.canon.co.uk/Support/Consumer_Products/services_locator/index.aspx

Or in the USA:
http://www.usa.canon.com/cusa/support

Please rate my answer if this helps.

Many thanks,

Chris

Mar 12, 2011 | Canon BJC 3000 InkJet Printer

9 Answers

Canon s9000 blinking 7 times. Tried the on and resume button sequence without success. Rob


HI,

Please do a hard reset.Unplug all the cords of your printer for 20min. and then plug it back in.
Let me know the result.

I will be waiting for your reply.

Oct 06, 2008 | Canon Printers & Copiers

2 Answers

Flashing orange light 5 times followed by green


I am also having this problem, would love someone to give us a solution before I through it out the window.....

May 10, 2010 | Canon BubbleJet i560 InkJet Printer

1 Answer

Can't get past step 2 of the Canon i550 waste tank counter reset.


Hello you can try
Problem for Canon BubbleJet i560 InkJet
The waste ink is in the inside of your printer you need to get at it to clean out,
It may be all screwed down so you need to open all up or get a shop to do it for you.
It not an easy job but maybe you are handy with a screwdriver, it can be messy job.
But after this, you will have to reset the waist ink counter or it will still not work,

But but but but you can always try this to reset it first and clean it out again some time.

Canon Reset waste ink counter
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Sep 27, 2009 | Canon BubbleJet i550 InkJet Printer

1 Answer

Yellow light blinks 7 times with 1 long green blink


Jennifer, According to an answer by kev1952 on 19 Sept, to my similar error condition ( "repeating sequence of 7 orange and 1 longer green flash of power LED" ) in a Canon i550 printer, and assuming that what you called yellow I called orange, then you too may have a printhead fault. kev1952 recommended to try to get it cleaned and checked at an ink refilling specialist service.
gp26, on 21 Sept 2009

Aug 17, 2009 | Canon PIXMA iP1600 Printer

1 Answer

S9000 printer will not print.


Hi
Try this see if work for you.

Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Jan 13, 2009 | Canon i950 InkJet Photo Printer

1 Answer

Canon Pixma ip3000 flashing amber 6 times


If the 6 flashes are accompanied by an on screen message #5400, this is a "Service Call Error" code.

This code indicates the following;
Internal temperature error [5400]
The solution to this is the following part replacementl
- Logic board ***'y (QM2-1548) *1

*1: Before replacement of the logic board ***'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or
more, also replace the bottom case unit (QM2-1205) or the ink absorbers (QC1-4222 / 4223 / 4224 / 4263 / 4264 / 4864 / 4221 / 4257) when replacing the
logic board ***'y.
[See Section 3-3. Adjustment / Settings, (6) Service mode, for details.]

Good luck!!!

Jan 12, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Operator Error Canon i850 printer


Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:
presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i850)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

Dec 09, 2008 | Canon BubbleJet i560 InkJet Printer

1 Answer

S9000 canon printer ink tank full


Hi
Try this see if work for you.
may work
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Nov 02, 2008 | Canon i950 InkJet Photo Printer

1 Answer

Blinking orange 5 times and 1 green


Try this:
Most of the time when a printer used for a certain period the ink would dry out and caused an error message. What you do is to replace with a new inks pad inside the printer and reset that error message. Once it is done, your printer will work again!

For Printer Model: Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000:

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
Please remember to rate all Techs who assist you for free :)

Oct 04, 2008 | Canon BubbleJet i560 InkJet Printer

Not finding what you are looking for?
Canon i950 InkJet Photo Printer Logo

Related Topics:

1,161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...