Question about Vacuums

1 Answer

My Bissell series 65832 vacuum's rotating floor brush is making a really loud noise like its hitting something when ever I turn it on. Can you tell me how I can fix .

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

It probably needs a new belt, unplug the unit and find the screws that hold the cover where the belt it,remove them and look at the belt.Or it could have string or something wrapped around the brushes that would need to be cut out.

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bissell heavy duty 9x cyclonic vacuum cleaner has loud noise when brush roller is turned on


Inspect the area around the brush roll. There may be something stuck somewhere in there. Remove the brush roll to see if the brush roll end caps will spin freely. If there is hair or debris restricting the brush roll may be causing noise.

Feb 19, 2015 | Bissell Carpet Cleaner Powerbrush Deep...

1 Answer

Noisy hoover


1 Check the impeller to make sure it is not missing part of a blade or has something jammed in it that could throw it off balance.
2 Check the bearings on the rotating brush, especially at the belt end.
3 Remove belt and turn on. If noise still persists, it likely would be the motor is shot.

Jun 21, 2014 | Bissell Lift-Off Floors and More Pet...

1 Answer

Brush roller not spinning. belt, spindle okay. roller taken out and cleaned, no thread. replaced but no dice. ???


Use only BISSELL Style 10 Replacement Belts (#32074) in your BISSELL PowerForce Bagless.
  1. Unplug cleaner from electrical outlet.
  2. With Rotating Floor Brush removed from vacuum cleaner, grasp old Drive Belt and remove from Motor Pulley. Discard old Drive Belt.
  3. Place new Drive Belt over Motor Pulley and stretch other end over Rotating Floor Brush in the space between the bristles.
  4. Place ends of Rotating Floor Brush down into slots on sides as shown.
  5. Turn Rotating Floor Brush by hand several times in the direction of Motor Pulley. If properly installed, Drive Belt will center itself on Rotating Brush.
  6. Reposition Brush Cover and snap back into place. Check to be sure all three latches are secured.
  7. When you turn on the vacuum, do you see the motor that spins the belt spinning at the bottom? If not, it sounds like you may have a burned out motor.
If suggested solutions do not correct the problem, call:
BISSELL Consumer Services 1-800-237-7691
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m. - 8 p.m. ET

Jun 01, 2011 | Bissell 6594 PowerForce Bagless Upright...

1 Answer

Our beater brush makes a really loud grinding sound when turned on.


clearly something is jammed in up under the beater brush... if not there, then follow the belt which drives it.. something is caught up for sure.
Ck

Feb 13, 2011 | Bissell Healthy Home HEPA Bagless Upright...

1 Answer

Model #3760-2 Bissell upright vacuum- making very loud noise when running. Cleaned all filters- no difference


Is the noise coming from the belt area, ie. beater bar, or does it sound like it is coming from the motor itself? It is possible there is something caught in the brush roller.
When you turn the roller off, does the noise go away?

Dec 20, 2010 | Bissell Vacuums

1 Answer

My Bissell Pet Eraser brush only rotating on the bare floor setting, when on the pet setting, it won't rotate. What is the problem? Thanks.


it sounds like something is backwards. the brush should only rotate when using it on carpet, it should never rotate on the bare floors. check the belt for propper installation

Jan 03, 2010 | Bissell Upright Vacuum - The Pet Hair...

1 Answer

I have a noisy Bissel3750 series lift-off bagless


You need to replace the belt and when you have the roller brush out to do that you need to clean it off really well. Here is a link to the belt you need and the manual which has instructions:

Bissell Lift-Off 3750 Belts

User Guide (PDF)

Dec 09, 2009 | Bissell Vacuums

2 Answers

Loud noise??


I have the exact same problem. I've taken the thing apart and cannot figure out what is causing the noise. It's not the belt and it doesn't seem to be coming from the engine. It sounds like the spinning brush is hitting something, but it's not, that I can see.

Jul 12, 2008 | Bissell 6590 CleanView Bagless Upright...

1 Answer

Vacuum problem


Check the brush roll, do the ends turn freely, if not, replace it. Could have a clog in the hose or the dirt inlet by the brush roll, the other could be a bad motor.

Mar 19, 2008 | Vacuums

2 Answers

Bissell vaccum problem


Could be plugged, check the hose and at the bottom by the brush roll, the inlet maybe clogged. Also check the filter under neath the dirt tank. There are filters above the dirt container, clean those out. If after that it is still loud, then maybe the motor fan or bearins are bad and will have to be replaced, part #2031214 sells for around $55.

Jan 16, 2008 | Bissell 3594 CleanView PowerTrak Bagless...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...