Question about White Sewing 1418 Mechanical Sewing Machine

1 Answer

Does not stitch

I was in the middle of sewing and a needle broke. Now it will not stitch. I checked everything but alas no stitch.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

You may find that there is a piece of needle end in the bobbin case or holder. and maybe even try the canned air and spray it may help to clean it thoroughly. just take out the bobbin and use a q tip with a bit of oil on it and swab the holder and you could find the piece of needle

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Singer Quantum 9910 is completely locked up.The wheel can't be turn.


take it in far a warranty service check
the needle breaking may have altered something or broke something inside

Jan 20, 2016 | Singer Quantum 9910 Computerized Sewing...

2 Answers

How do I get it to sew?


was the presser foot lowered? check if the loop-taker is properly installed or seated.

25891581-gt4hk250t12wittbmtnecoej-2-0.gif

Oct 03, 2015 | Brother XL2600I Sew Advance Sew Affordable...

1 Answer

My machine stopped working!


it's possible that the machine will need a adjustment or the timing
checked at a repair shop

Dec 06, 2012 | Sewing Machines

1 Answer

My needle broke on my serger and i replaced it and now wont make stitch. please help


some times when you break a needle in a sewing machine or
serger it can cause the machine to jump time, it would be a good
idea to have the machine checked for a timing problem or to see
if when the needle broke it caused a problem with another part in
the serger.

Nov 12, 2012 | Sewing Machines

1 Answer

With each stitch the machine makes a loud clacking noise and needle broke


Needle breaks
1.the needle is damaged
2.the needle is not correctly inserted
3.wrong size needle for the fabric
4.the wrong foot is attached
5.the needle clamp screw is loose
6. Top tension is too tight
7. Machine could be out of time--needs to be checked at a repair
shop

Sep 10, 2012 | Brother Sewing Machines

1 Answer

I have a Singer 327K that stitches three or four good stitches and then stops completely stitching


it's very possible that when the needle broke the machine went out of time & would have to be retimed at a sewing machine shop

Mar 10, 2012 | Singer Sewing Machines

1 Answer

Needle broke and i changed with the same number now it is not picking up the thread and does not stitch


you said the needle broke, did you check in the needle plate where the feed dogs are if there was any needle fragments
also check in the bobbin area for needle fragments, take the bobbin case & bobbin out & clean the area

Oct 21, 2010 | Singer 8280 Mechanical Sewing Machine

1 Answer

Loose stitching underneath. HOW CAN I FIX!!!!


Sounds as though you may have a burr or rough spot on the hook where the bobbin inserts. Run your finger along the edge of the hook to see if there are any rough spots.I'm sure you're going to find at least one from the time you broke the needle.Once you locate it, remove it with an emery stick or small sharpening stone. Polish it so that it is smooth. Should work okay.
sewman7

Jun 27, 2008 | Juki TL-98Q

Not finding what you are looking for?
White Sewing 1418 Mechanical Sewing Machine Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top White Sewing Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Cindy Wells

Level 3 Expert

4762 Answers

tsalagi152

Level 2 Expert

84 Answers

Are you a White Sewing Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...