Question about Computers & Internet

1 Answer

9600GT Vista 64 bit Screen gets No Signal after logon

I have just bought a new computer and installed a fresh copy of Windows Vista home premium 64 bit its hardware drivers and SP1. Everything was running fine until I installed the newest drivers for the Geforce 9600GT video card.

After the install Windows booted up normally past the logon screen and then the monitor goes black and displays ''No Signal'' and goes on standby. The card and drivers work perfectly in XP so this indicates that the drivers

I have tried re-istalling the newest drivers, the drivers on the disk, updating the drivers via Windows update, plugging the screen into the second dvi plug.

I also checked many other forums and found plenty other people with the same problem but no solutions.

My config
Intel DP35DP mainboard
FORSA Geforce 9600GT
4GB ram
Geforce 9600GT video card
Windows Vista home premium 64 bit and SP1

Please help.

Posted by on

  • andriesk1 Mar 08, 2009

    Lea0101 your'e the man! I think you are a god amongst men. You are my personal saviour and I don't say that lightly.



    After searching for 3 days reading an encyclopedia of posts and trying every which way and manner of fix people dream up. Then downloading almost 2 gigs of hardware driver updates, service packs and flashing the bios, installing several different versions of the nvidia drivers almost 30 times and fiddling with bios settings ad infinitum. I was ready to rip the bastard video card out and cut my wrists open with it whilst chewing off my ankles.



    I knew it would be an older driver that would solve it but I just could not find one.



    Thank you very much. Your'e a King.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 62 Answers

Make sure that you uninstall the drivers that don't work.Then go to this web site download and install new drivers.
http://www.zdnetasia.com/downloads/pc/swinfo/0,39043052,50002410r-39555174s,00.htm

Posted on Mar 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instant dvd recorder software 'not responding'


Hello Joshua,



Instant DVD Recorder 2.6.1 UPDATER
  • Please install the Instant DVD Recorder 2.6.1 UPDATER if you are using the Dazzle DVD Video Recorder, Dazzle Video Creator or Dazzle Video Creator Platinum with a previous version of Instant DVD Recorder. This updater also includes the hardware drivers.
  • If you are using a Dazzle product already that includes Instant DVD Recorder version 2.6.1, then you do not need to install this update.
New with this version:
  • added support for Windows Vista 64 bit and Windows 7 (32 & 64 bit)(
  • Includes Windows Vista and Windows 7 drivers (for both 32 and 64 bit) for the DVC 100, 101, 103, 107 hardware NOTE: DVC130 and DVC170 don't have 64 bit drivers and can only be used with Windows XP and Windows Vista 32)
  • 16x9 detection
  • PCM Audio (already included with Instant DVD Recorder ver. 2.5)

Supported Hardware:
  • Dazzle Video Recorder ( DVC90) - Windows XP and Vista 32 bit only
  • Dazzle Video Creator ( DVC130) - Windows XP and Vista 32 bit only
  • Dazzle Video Creator Platinum ( DVC170) - Windows XP and Vista 32 bit only
  • Dazzle Video Creator ( DVC100 and DVC101) - Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
  • Dazzle Video Creator ( DVC103) - Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
  • Dazzle Video Creator Platinum ( DVC107) Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
  • and other compatible hardware

Installation Instruction:
  • To be able to install this version, you must own an Instant DVD Recorder Version 2.x full version
  • To install this Instant DVD Recorder version not as an update but as a full version you need to enter your Instant DVD Recorder Version 2.x serial number during the installation process. The serial number was included in your Dazzle product.
  • With Windows Vista 64 bit or Windows 7 64 bit, you need to install Instant DVD recorder 2.6.1 as a full version.
  • If you own an Instant DVD Recorder Version 1.x full version, to only install Instant DVD Recorder 2.6.1 full version.
  • If you use this Instant DVD Recorder Updater to update the Instant DVD Recorder included with Studio Version 12, 11 or 10, please make sure that Instant DVD Recorder is already installed on you system. Please note that the version of Instant DVD Recorder included with Studio Version 12, 11 or 10 can't be installed under Windows Vista 64.
For Windows XP

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250


For Windows Vista 32 Bit

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

For Windows Vista 64 Bit

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

For Windows 7

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

Sep 15, 2011 | Pinnacle Dazzle DVD Recorder

1 Answer

Nvidia driver will not work with windows 7 (gefore 9800gx2)


Hello ognetpc, did you install 32-bit or 64-bit video drivers ? Example if you have windows 7 64-bit you must install 64-bit video driver, because nvidia 32-bit video driver will not work properly. I found latest drivers for you video card. Click save driver to your computer, install the driver, don't forget to restart the computer. Here is the link.

Copy and paste link into your browser and press enter.




For Windows 7, Vista 32-bit
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/260.99/260.99_desktop_win7_winvista_32bit_english_whql.exe&lang=us&type=GeForce




For Windows 7, Vista 64-bit
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/260.99/260.99_desktop_win7_winvista_64bit_english_whql.exe&lang=us&type=GeForce


Good Luck!




Nov 22, 2010 | BFG Technologies BFG Tech...

1 Answer

I NEED DRIVERS FOR GF6200 VGA


Hello adugyampo, i found latest drivers for your XFX GeForce 6200TC Graphics Card from website fully compatible with Windows 7, Vista, Xp. Click save driver to your computer, install the driver, don't forget to restart the computer. Copy and paste link into your browser and press enter.

Here is the link:



For Windows XP Professional, Home Edition 32-bit
1. http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/260.99/260.99_desktop_winxp_32bit_english_whql.exe&lang=us&type=GeForce




For Windows 7, Vista 32-bit
2. http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/260.99/260.99_desktop_win7_winvista_32bit_english_whql.exe&lang=us&type=GeForce



For Windows 7, Vista 64-bit
3. http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/260.99/260.99_desktop_win7_winvista_64bit_english_whql.exe&lang=us&type=GeForce

Good Luck!

Nov 09, 2010 | XFX GeForce 6200TC Graphic Card

1 Answer

Geforce 8500 GT Causes "Snowy" screen


You have Vista 64 bit right? I looked and the newest nvidia driver is 182.08 located here:

http://www.nvidia.com/object/winvista_x64_182.08_whql.html

1. Download this driver.
2. Go to the Control Panel, Programs and uninstall the current nvidia driver.
3. Shut down computer.
4. Remove video card and re-install it.
5. Start computer and install new nvidia driver.

Mar 11, 2009 | XFX NVIDIA GeForce 8600 Graphics Card

1 Answer

I just bought a 64 bit operating system Vista Home Premium Computer and it won't load a 16 bit software application. Is this normal? Is there anything I can do to my computer to change it from a 64 bit...


You can try running the 16 bit app in compatibility mode. Right click on the app's exe, click on properties, and select compatibility, then tick the box labeled "run in compatibility mode", then select Windows 98 from the now available drop down box.

Dec 25, 2008 | NewTek Video Toaster 2.0 (512 MB) Graphic...

2 Answers

I have Vista Home Premium 64bit and the Pinnacle PCTV HD pro stick i just bought is only capable with 32 bit media center. There is an updated driver on this site that i downloaded:...


Take it back! Either the computer or the Pin. TV Had this system last year on the 32 bit computer and was not happy. There is so much to adapt that it is not worth it. The world is not ready for 64 bit! See if you can use Vista system under the control panel to get it too work. This is mainly for older programs not running on Vista like games, etc. but try it for 64 bit--not sure, but call Pinacle if all else fails. If they want to make sales they must have support!

Dec 11, 2008 | Pinnacle PCTV HD Pro Stick USB 2.0 TV...

1 Answer

Pinnacle PCTV pro stick 801e


Hi Adam,

Here is the link for tv center pro for your vista 64 bit download and install this to your computer. http://cdnexpress.pinnaclesys.com/akdlm/SupportFiles/TVCenter/TVC540/PinnacleTVCenterProSetup_5.4.0.3032.exe.
I suggest also to connect your tuner device at any usb port.

By the way you need the serial number for the new tv center pro.

Enjoy.

Dec 11, 2008 | Pinnacle PCTV HD Pro Stick USB 2.0 TV...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,006 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98868 Answers

David Payne
David Payne

Level 3 Expert

14086 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...