Question about Lexmark X5150 All-In-One InkJet Printer
Ensure the All-In-One printer is powered on.
Lift the scanner unit
The cartridge holder will move to the center of the All-In-One
Press down on the cartridge carrier latch to raise the carrier lid.
Remove the used cartridge. NOTE: If you are removing both cartridges, repeat the preceding two steps for the second cartridge.
Remove the protective tape from the back and bottom of the new cartridge(s).
WARNING! Do not touch the gold contact area on the back or the metal nozzles on the bottom of the cartridges
Insert the new cartridges into their respective carriers.
Close the carrier lids so that they remain closed.
Close the scanner unit, taking care to keep your hands out from underneath the scanner unit as it is being closed.The control panel display will prompt you to load paper and print an alignment page. NOTE: The scanner unit must be closed before you can start a new scan, print, copy, or fax job.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Posted on Mar 07, 2009
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 25, 2011 | Lexmark X5150 All-In-One InkJet Printer
Feb 07, 2011 | Lexmark X5150 All-In-One InkJet Printer
Oct 23, 2010 | Lexmark X5150 All-In-One InkJet Printer
Nov 19, 2009 | Lexmark X5150 All-In-One InkJet Printer
Jan 25, 2009 | Lexmark X5150 All-In-One InkJet Printer
Sep 01, 2006 | Lexmark X5150 All-In-One InkJet Printer
May 29, 2014 | Lexmark X5150 All-In-One InkJet Printer
47 people viewed this question
Usually answered in minutes!