Question about General Electric Stove/Oven/Range Chrome Timer Knob Set - WB3X459

1 Answer

Oven wont turn on and f7 keeps beeping, but stove top burners work on ge spectra xl44 on model number jgbp86bea3bb

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,
Well, F7 error code occures due to
A = Function pad button stuck or 
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Replace the ERC there are ten screws 3 on each side and 4 on the control leave the hex screws alone all you need is a phillip screwdriver.
REMEMBER TO SHUT OFF THE POWER FIRST lift and fold out the control panel remove the ribbon cable and remove the four screws that hold the control board . replace control panel in reverse order.

Good Luck!!
Have a nice Day!!
Thanks

Posted on Jul 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ge stove is dead. control panel is out, burners and oven will not turn on


The circuit breaker probably tripped. Usually it will be a 2 pole 40 or 50 amp breaker. Turn it all the way OFF, then back ON. Sometimes it's not easy to visually tell if a breaker has tripped, so do it anyway. If that doen't solve the problem post back please.

Dec 18, 2010 | General Electric Stove/Oven/Range Chrome...

2 Answers

Oven beeps and displays F2 or F3?


Hello there:
this error code is telling you that the oven temperature sensor is going haywire and needs to e replaced
Here is the 2 error codes and what they mean and what needs to be checked
F2 Oven temp exceeds 590 w/ unlocked door High resistance or interference in oven temperature sensor. Replace oven temperature sensor F3 Open oven temperature sensor circuit Replace oven temperature sensor
fdb7fe7.jpg

Oct 04, 2010 | General Electric Stove/Oven/Range Chrome...

1 Answer

WE have a GE Stove top Range. The burners aren't


If you have power to the stove as in the oven light works and the clock works but the burners and oven will not work you only have 120 volts coming to the stove. The stove requires 240 volts for the burners and oven to work. Check the service panel for a blown fuse. There will be 2 fuses in the fuse holder. One of them is blown. If that is not the case then one of the wires has come loose either in the service panel or in the outlet behind the stove. Use a multimeter to check the input voltage at the outlet.

Apr 25, 2010 | General Electric Stove/Oven/Range Chrome...

1 Answer

After my oven heats up and ive set the timer it starts beeping and showing F3 and doesnt stop soihave to turn it off


The "F3" error code means the oven sensor is open.

An ohmmeter reading for the open circuit should be "∞".

Resistance should be measured across both wires.

The following article on our forum will explain in detail how to run a continuity test using either an analog meter or a digital meter – How to check continuity with Ohmmeter.

- The part number for the oven sensor is AP2023862

Here are the break down diagrams for the GE range Model JB940AB1AA

Mar 22, 2010 | General Electric Stove/Oven/Range Chrome...

1 Answer

Humming noise from stove


Turn the convection oven switch to the off position.

Feb 15, 2010 | Viking Stove/Oven/Range Timer Knob -...

1 Answer

The control panel is flashing F1 oon my stove. A technician told me that parts were no longer available. I think the stove is about 15 years old and I don't have the model number with me at this time....


The code is: 'failed thermistor control' and the bad part is the 'electronic range control'. Look inside the oven door opening edge for a model number--usually an aluminum plate glued to the surface. Once you find the model number, get on the internet and search (GE mod#, part). If doing your own repair, be sure to remove power by pulling the plug or switching off the appropriate breakers.

Feb 04, 2010 | General Electric Stove/Oven/Range Chrome...

1 Answer

Oven doesn't light, ignite


I assume it a gas operated oven. In the past I have gotten the gas company out to reajust our stove at no cost. If it is a gas unit you need it readusted before it cause damage to your house or life.

Jun 10, 2009 | General Electric Stove/Oven/Range Chrome...

1 Answer

GE oven ignitor replaced, gas turns on but no flame


Yeah, blowing up the house is never a good way to replace an appliance :)

Try contacting GE at: http://www.geappliances.com/service_and_support/contact/form_service.htm. It should be free and they'll be able to help you narrow down what's going on.

Alternately, new GE ranges start at a little over $400 at Home Depot... You certainly have to appreciate keeping a good appliance going, but if it starts nickel & dimeing you, it may be that range's time to go.


May 24, 2009 | General Electric Stove/Oven/Range Chrome...

1 Answer

Replacing oven burner element, the lower element, for a GE stove


(I think it is 50 watts or volts??)
Most electric ranges are supplied with 220 volts - this is, especially at 60 Hz, deadly. You were lucky this time.
If the wires are not welded onto the element contacts, they might be so-called 'quick-disconnects' that pull straight off of blades that are part of the elelment.  
You probably haven't hurt the range with the momentary short circuit since the chassis of the range is connected to neutral or ground so you just gave your breaker a workout. BTW, I have had to replace late breakers after they tripped. They wouldn't stay reset any more even after the problem was removed from the circuit. Don't be surprised if yours doesn't stay reset; it may not be a fault causing it. 

Jan 18, 2009 | General Electric Stove/Oven/Range Chrome...

1 Answer

Cannot reset clock on my electric stove after a power failure!


Unplug the stove for 10 minutes, then plug it back in.
This should resolve your problem...

Nov 20, 2008 | General Electric Stove/Oven/Range Chrome...

Not finding what you are looking for?
General Electric Stove/Oven/Range Chrome Timer Knob Set - WB3X459 Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top General Electric Timers Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Alan Timperley
Alan Timperley

Level 2 Expert

91 Answers

Are you a General Electric Timer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...