I can t find a fly back for my tv sharp ultra flat 32 inches
I bought a sharp ultra flat 32 inches in 2005 and my fly back blow. I call the sharp company and they said they don``t have that piece cause it``s too old .They want laught of me. Please help me to find my piece Model number cu32f630 , Fly back number ta041wj-m I live in QUEBEC,CANADA
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you take the TV and lay it flat on its face, then you will be able to get the whole back cover off. Once the back cover is removed, and with the TV still on its face, there will be some a large circuit board sticking up in the air from what is normally the bottom of the TV. At this point you may want to tip the TV back onto its bottom (so the screen is showing again). Now, on the right side of the circuit board, near a couple things that look like large batteries sticking up, will be the two IC chips. They are about an inch long and maybe half an inch wide. They are only a couple inches from each other. Hope this helps you locate them.
If you know where the fly back is, ok open the casing and see at the
back of the fly back, there are two knobs, one for the focus and the other is
for the brightness. Try twist both and see which one is for the focus. Ok,
from the focus knob try adjustinguntil the fuzzy sight disappears. Try
this, I usually do it to screens with blurryappearances.
to convert your tv from pal to ntsc ,find the ceramic filter value 5.0 , 5.5 or 6.0 and change it with 4.5 and . Take note that the ceramic filter of sound and video are defferent ever if it is the same value
patrioticdog-I have just answered a similar problem, you can remove the back and find the flyback transformer. The big part with the round rubber plug hooked to the pix tube. there will be two controls on the flyback one for focus one for screen. turn up the screen ever so slightly,your screen will brighten up.Also if you check the main pcboard ass'y there may be a sub bright control same thing small adjustments. maybe tell the guy to give a bit off cause of repair ,good luck let me know. cooltek Feb15/08
there is no recall on sharp tv that i know about if your tv is still on warranty take it back to the supplier.if the warranty is finish call a tech the tv has a problem in the power supply and related circuit.good luck.