Question about Hasbro Room Tech Beingz Alarm Clock Radio - Yellow/green
Purchased this clock and no instuctions came with it..
There is a switch on the back to set time, alarm, or display time. Select the switch to time set first. Tap top of unit to toggle between settings blinking display is the one to be set. Change it bi tapping on the sides ( ) or(-) don't forget the 12 hour display or military 24hour. Switch back to clock display when hour and minute display are both blinking or the setting will not take effect
Posted on Mar 18, 2012
Usually setting time on any clock requires you to set the hour then the minutes. If there is a time button press and hold that, while holding down the hour button or scroll through the hours by pressing the hour button repeatedly until the correct hour shows. do the same with the minute button, this clock displays the time on the front so it should show you the number you are trying to set.make sure you check if you are setting am or pm.
I cant find a picture of the clocks time set buttons so am guessing..
Posted on Jan 26, 2010
Tips for a great answer:
Oct 19, 2012 | Audio Players & Recorders
May 16, 2011 | Hasbro Room Tech Beingz Alarm Clock Radio...
Jan 26, 2010 | Hasbro Room Tech Beingz Alarm Clock Radio...
Mar 13, 2009 | RCA Radio Alarm Clock
1,731 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: