Question about Norton SystemWorks 2005 Premier Retail Box (NORTONSYSTEMWORKS2005PREMIER)

3 Answers

Host machine is running XP Home. Host machine is running Internet Conection Sharing. Host machine is therefore DHCP server for LAN. If Norton Internet worm protection is enabled, other PC's on LAN CANNOT get IP address. If Norton Internet worm protection is disabled, other PC's on LAN CAN get IP address. As other PC's on Lan include laptops that log onto other networks - IP address can be anything so to specify a range to exclude would have to be from 0.0.0.0 to 255.255.255.255 which is obviously unaceptable. XP obviously uses a program to monitor requests to access DHCP server for assignation of IP address - what is that program so i can add it under Program rules to exclude it so other PC's on LAN can get IP address whils Norton INternet worm protection is running.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I work for Norton... Which norton product do you have?

Posted on Oct 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 84 Answers

Hi this is a network worm i advice you to format your pc and backup your data

Posted on Sep 01, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 181 Answers

If you open the norton product means after the progarm rules you will get firewall or general rules there you have to change all the blocked rules to allow..
surely it will work it..

Posted on Mar 18, 2009

  • vimalraj baskar
    vimalraj baskar Jul 04, 2009

    you have to configure the internet worm protection there you can to add the rules for the software

×

4 Suggested Answers

  • 21 Answers

SOURCE: I have uninstalled Norton Anti-virus (outdated)

You have a virus ... Nail.exe. Adware and the like appear to b able to remove this.
http://forums.techguy.org/malware-removal-hijackthis-logs/459810-solved-c-windows-nail-exe.html

may help you

Posted on Mar 24, 2009

puertobori
  • 7725 Answers

SOURCE: Dear Sir/ Madam;\r\n I have renewed my Norton

Save your Product Key kb_tip.gif If you have a CD version, you can find your Product Key at the back of the CD sleeve. For your download purchase, you can find it in the confirmation email from Symantec. If you can locate your Product Key, skip to Step 2. 1Log on to your Norton Account.
GO THERE NOW 2 On the top-right corner, click Sign In. 3Type in your email address and password for your Norton Account, and then click Sign In.
4 Under Products, click the Norton product for which you want to save the Product Key. 5Write down the Product Key.
STEP 2 Activate your Norton 2010 product 1Make sure that your computer is connected to the Internet.
2Start your Norton 2010 product.
3On the bottom of the Norton product window, click Activate Now.
4Type in your Product Key.
If your product came with your computer, you may not have to enter the product key. You can skip this step.
5Click Next.
6In the Norton Account Window, enter your email address and click NEXT.
Your Norton 2010 product checks the existing Norton Accounts using the email address.
7Depending on your situation, do one of the following:

  • If your Norton 2010 product finds your Norton Account, enter the password and click SIGN IN.
  • If your Norton 2010 product does not find any existing Norton Account, complete the form and click NEXT.
8Review your subscription details, and then click DONE.
Your copy of Norton 2010 product is now activated.



If you need more help come back.Post / thumbs / testimonial are welcome!

Posted on Dec 12, 2010

alexpawwath
  • 64 Answers

SOURCE: I HAVE 20 COMPUTERS CONNECTED THROUGH LAN SYSTEM

Dear Walia,

We need to check weather you are getting any error message while trying to access the Network Computers..
Could you please go through the following steps and check weather you are getting any error message or Dos system getting hanged..

Disable the Norton program from the First 2 systems and try to access the Computers with Ping command...


To use the ping command please open the Command prompt and type ping [ip address of the Second system] ...

If u can access the Computers after disable the Norton program means surely it due to the issue with the Norton firewall...


In that case we need to create the New firewall rule for the Norton program to access the Specific Application

Thanks
Alexander Xavier

Posted on Apr 23, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the server aol to my google chrome on start up


Dynamic host configuration protocol (DHCP) is a way to configure IP addresses and TCP/IP settings throughout your network.

The DHCP service is run on a machine with a static IP address so that the computers on the network can find it for automated configurations.

Setting the IP address on a Windows 2003 server is accomplished through the network configuration settings in Control Panel.

Click the Windows "Start" button and select "Control Panel." Double-click "Network Connections." In this section, double-click "LAN Connection."

This opens the configuration tool to set the IP address of the server.

Select "TCP/IP" from the list of configured network applications and click the "Properties" button. This opens a new configuration window.

Select "Use the following IP address" to set a static IP for the server.
Enter the IP address chosen for the server in the first textbox that is activated.

Enter the subnet mask and default gateway for the server.
The default gateway is usually the router on the local network or the DSL or cable modem on a small, home network.

Enter the DNS server address.
The DNS servers are separate servers on the network.

For small, home networks, the DNS server is provided by your service provider.

Click the "Ok" button to save the settings. Click "Ok" again at the general LAN properties window.

Renew settings on local computers. Computers that use the DHCP server for configuration need to be rebooted.

You can also use the DOS command prompt to renew settings.
The "ipconfig -renew" command refreshes the settings on client computers on the network.

or for home page browser

Create the menu tab on your homepage right click in the top toolbar you should see a number of toolbar options select the menu tab which will add File Edit View Favorites Tools and Help

Click on the tools at the bottom of the drop down list will be internet options or
Click start control panel internet options you will see a home page box To Create Page Tabs type

each adress on its own line (type in google.com) or your preferred home page and browser
below that will be change search defaults click on settings you will see all search Providers
Toolbar extensions and Accelerators you have

have if dont need any of them you can disable or remove them


Click start type cmd press enter you will be in DOS mode
type in ipconfig press enter
you will see all of your internet connection details



Hope this helps

Dec 29, 2012 | Google Chrome

1 Answer

I want to set up a server and 10 computer LAN without an internet connetin involved


just hook it up, you have no router involved so it will have no internet connection.
Just connect all the PC's to the switch using straight through patch leads and assign the IP address manually as DHCP will not run on the switch.
you don't need a default gateway address as there will be no routing. Just set the IP addresses to;
192.168.0.1
192.168.0.2
192.168.0.3
and so on for each host on the LAN.
Use the subnet mask 255.255.255.0 this will give you the address range 192.168.0.1-254

hope this helps.

May 03, 2012 | D-Link DES Computers & Internet

1 Answer

My server has 2 NIC one of them connected to the router (ISP) and one of them is connected to the LAN.But DHCP and DNS working but there is no internet to the Host and also the server itself.when i...


Hello,

This is more a configuration error. Depending on how you have your DHCP setup, you may need to adjust it's setting. No mention of what os you are using but if you set your DHCP to give IP addresses only to the LAN, set the ISP NIC address to receive its ip from the ISP provider, you should be able to get Internet access to your server and the LAN.

If you have done so, use the server os to setup your Internet connection. Answer a few questions about how you connect to the Net and the os will do most of the configuration for you.

Good Luck
C2Solutions

Jan 24, 2011 | Dell PowerEdge 1800 Server

1 Answer

How to share internet connection on Windows Vista OS. I want to share internet connection between two Laptops using Windows Vista Operating system and the other using Windows XP. The Host computer is...


All right let's call your Vista computer A and your Xp computer B. First you have to bring the two computers into LAN. If you already did this, please skip the next eight steps.

Step 1: In Vista, before doing this you should enable Sharing and Discovery. You can do that by going to Control Panel -> Network and Sharing Center. Under the section ‘Sharing and Discovery, enable Network discovery, File Sharing, Public folder sharing and others if you want to. (See picture below)

Step 2: If your LAN card that is connecting to another computer is installed, it will be shown under Control Panel -> Network Connections.

Step 3: Right click that local area connection and click properties.

Step 4: Under the tab ‘Networking’, click the properties Internet Protocol Version 4 (TCP/IPv4).

Step 5: Click the radio button to ‘Use the following IP’ and give an IP address (For example, IP address: 192.168.0.1 and Subnet Mask: 255.255.255.0)

Step 6: Don’t give any other information, Click Ok and close everything.

Step 7: In computer B, which is the XP, make sure you enable the LAN card which is used to connect to computer ‘A’. Here you need not give any IP information as Computer ‘A’ will assign an IP address dynamically. If it’s not working make sure there are no IP assigned and change the properties to ‘Obtain an IP address automatically’.

Step 8: Test the connection by pinging. (You can do this by typing ping 192.168.0.1 or whichever is Compter ‘A’s IP in the comand prompt)

NOW your computers are connected. Now to share the internet:

Right click LAN card which is connected to Internet under Control Panel -> Network Connections and click ‘Sharing’ tab and enable both the options to share Internet. (Note: Unless there is another enabled LAN setting you will not be able to see the shared tab under properties)

Click Ok and close. This option is given by the Windows OS known as ICS (Internet Connection Sharing).

Now you can use Internet from both Computer A and Computer B from a single connection.

So this is the setup you need on the Host computer as you requested, if you turn out to need help witht he XP one too, let me know:)

Feb 14, 2009 | Compaq Presario 700 470024-192 Notebook

3 Answers

D-link cant accesed internet 4pc


Most of DSL modems are connected to PC with USB cable...
n if ur server is connected with other pc on lan .. you can use internet sharing option available in winxp.

Following are the steps to enable Internetsharing for other pcs.


How to use Internet Connection Sharing loadTOCNode(2, 'summary'); To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.

On the host computer loadTOCNode(3, 'summary'); On the host computer, follow these steps to share the Internet connection:
  1. Log on to the host computer as Administrator or as Owner.
  2. Click Start, and then click Control Panel.
  3. Click Network and Internet Connections.
  4. Click Network Connections.
  5. Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
  6. Click Properties.
  7. Click the Advanced tab.
  8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
  9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
  10. Click OK. You receive the following message: When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP
    address 192.168.0.1. Your computer may lose connectivity with other computers on
    your network. If these other computers have static IP addresses, it is a good idea to set them
    to obtain their IP addresses automatically. Are you sure you want to enable Internet
    Connection Sharing?
  11. Click Yes.
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0

let me know if it helps.

best regards,



Nov 03, 2008 | D-Link DGS-1008D 8-Port Gigabit Ethernet...

1 Answer

Server cannot see wireless workgroup machines but shares Internet


Disable any firewalls on the machine like Windows firewall or any other firewall like Norton, McAfe, ZoneAlarm and something like that. Or if you have firewall policies or access rules, you must enable the sharing there.

Oct 31, 2008 | Belkin Computers & Internet

3 Answers

Internet sharing


which internet u r using

Feb 27, 2008 | Computers & Internet

2 Answers

Setting up 16 port switch


Dear This is the step You can get a complete home network up and running in 10 easy steps. Here's a summary of what's involved: Take stock of your existing hardware. If you wish to share an Internet connection using Internet Connection Sharing (ICS), choose which computer will be your ICS host. Decide what type of network technology you wish to use. Make a list of the hardware you need for each computer. Install the network adaptors and install your modem on the ICS host computer. Physically cable the computers together. Switch on all computers, printers and other peripherals. Make sure the ICS host is connected to the Internet. Run the Network Setup Wizard on the ICS host. Run the Network Setup Wizard on the other computers on the network. Let's take that step by step. 1. Take stock of your hardware Note each computer's location and its hardware, including peripherals such as printers and modems. 2. Choose your ICS host If you wish to share an Internet connection between your computers using Internet Connection Sharing (ICS), choose which computer will be your ICS host. The ICS host has a direct connection, either by dial-up modem or high-speed link, to the Internet and provides access to the Internet for other computers on the network. Ideally, the host should be a computer running Windows XP. I'll assume you have made this choice in the following steps. Apart from XP's easy handling of ICS, by using an XP computer as your ICS host you get the benefits of using the Internet Connection Firewall. 3. Choose a network technology The most common choices are Ethernet and wireless LANs. For an Ethernet LAN you will need to install a network interface card, or NIC, in each computer and run cabling between the computers. If you don't like the idea of opening your computer to install a network card, look for a USB adaptor instead. Depending on the size of your network, you may also need a network hub or router to provide interconnection between PCs on the LAN. Two PCs can get by using an RJ-45 crossover cable; three or more computers require a hub or multi-speed hub (called a switch). If you have a high-speed Internet connection, a high-speed router is a good option. The Network Setup Wizard includes links to detailed advice about configuring your network, including help on designing a network layout to suit your home. If you opt for a wireless LAN, you'll also need a NIC for each PC (there are versions which use USB adaptors as well). The big benefit for home environments is that a wireless LAN does away with the need for cabling. On the down side, though, wireless LANs tend to be slower, less robust and appreciably more expensive than traditional Ethernet LANs. In particular, wireless LANs do not always live up to their stated working range, and you may find factors such as your home's construction and design, plus interference from other devices affect your wireless LAN's performance. You may need to add an expensive Access Point to extend the range of the LAN and, even so, it may not be sufficient. The bottom line is, if you decide to go the wireless route, make sure the store will refund your money if the LAN will not provide reliable performance within the specified range. 4. Make a list of hardware needed Make a list of the hardware you need for each computer, not forgetting any cabling, and buy it. If you're a little dazzled by the choices and configurations, consider purchasing a networking kit. These kits contain all you need to set up a two- or three-PC network. If possible, look for hardware which features the Windows XP Logo, indicating it is fully compatible with XP. 5. Install the adaptors Install the network adaptors and install your modem on the ICS host computer (you can also let the computers connect to the Internet independently by installing modems on each). 6. Cable the computers Physically cable the computers (and hubs or routers) together. Of course, you won't need to do this if you've chosen to go the wireless route. If you're installing an Ethernet network and have a lot of cabling work to do, you may prefer to get a professional to come in and do this work for you. It won't be cheap, but you can be sure you get the job done correctly and hopefully with minimal damage done to walls, ceilings and floors. 7. Switch it on Switch on all computers, printers and other peripherals. 8. Connect the ICS host Go to the ICS host computer and make sure it is connected to the Internet. 9. Run the Network Setup Wizard on the ICS host To run the Network Setup Wizard on the ICS host, click Start -> Control Panel -> Network And Internet Connections -> Setup Or Change Your Home Or Small Office Network. Follow the instructions in each screen and press Next to continue. XP's Network Setup Wizard takes much of the pain out of setting up a home network. The Network Setup Wizard will guide you through: Configuring your network adaptors (NICs). Configuring your computers to share a single Internet connection. Naming each computer. (Each computer requires a name to identify it on the network.) Sharing the Shared Files folder. Any files in this folder will be accessible to all computers on the network. Sharing printers. Installing the Internet Connection Firewall to guard you from online attacks. 10. Run the Network Setup Wizard on all computers To do so: Insert the Windows XP CD in the first computer's drive. When the XP Welcome Menu appears, click Perform Additional Tasks. Click Setup Home Or Small Office Networking and follow the prompts. Repeat steps 1 to 3 for each computer on your network. Make sure you maintain an active Internet connection on your host computer as you proceed through this process. geekgirl.tip If you don't have a CD-ROM drive on one of the network computers, you can run the Network Setup Wizard from a floppy disk: While running the Network Setup Wizard on the ICS host computer, select the option to copy the Network Setup Wizard to a floppy disk. Once you've completed setup on the ICS host, take the floppy to the next computer and insert it in the drive. Double-click My Computer. Double-click 3½ Floppy (A:). Double-click netsetup.exe. The quickie XP network If you want a really easy networking experience and you have the hardware to support it, consider clean installing Windows XP on two or more computers. First install your network hardware (network interface cards, cabling, et cetera), then perform a new installation of Windows XP. During installation, XP will sense your hardware setup, ask for a name for each computer, and then ask which type of setup you wish to create. Select Typical Settings For A Default Network Configuration. That's it. Provided your hardware is XP-compatible, XP will create a LAN using the workgroup name MSHOME. Using your network Once you have your network up and running, you can easily access other computers on the network via My Network Places (click Start -> My Network Places). The Task Pane in My Network Places lets you access computers on your network and adjust settings. The Task Pane in My Network Places lets you view your network connections and view each of the computers in your workgroup (the workgroup consists of all computers on a network which share the same workgroup name ? by default, XP gives all computers on your home network the workgroup name MSHOME, although you can change this if you wish). When you initially open My Network Places, you'll see icons for the Shared Files folder of each of the active network computers. Sharing a printer With your home network installed, your PC suddenly gains all the advantages of the other PC's on the network. If you've been lusting after your sister's colour photo printer, you can now print directly to it from your own machine. Provided, that is, your sister decides to share her printer. (You might offer to let her share your laser printer in return as an inducement ? sharing works both ways.) To share a printer, on the computer which is directly connected to the printer: Click Start -> Control Panel -> Printers And Other Hardware -> Printers And Faxes. (Note: These steps will be a little different if you're sharing a printer on a PC running a version of Windows other than XP. For example, under Windows Me, you click Start -> Settings -> Printers.) Click the printer you wish to share. Click Share This Printer in the Task Pane. In the printer's Properties dialog, click the Sharing tab. Click Share Name and OK. Make a printer accessible to others on the network by sharing it. Once a printer has been shared you can access it from other computers on the network. To do so: Click Start -> Control Panel -> Printers And Other Hardware. Click Add A Printer. In the Add New Printer wizard, when asked whether the printer is a local or network printer, select the latter. In the next screen, select the option to Browse For A Printer and click Next. Select the appropriate printer from the list and continue with the wizard. Sharing files and folders Sharing a folder is even easier than sharing a printer: Open a folder (such as My Documents), click Make A New Folder in the Task Pane and name your new folder. With the new folder highlighted, click Share This Folder. In the Sharing tab of the Properties dialog box, select Share This Folder On The Network. Provide a descriptive name for the folder. This name should make it easy for others on the network to recognise the folder; it doesn't have to be the same as the folder name you selected in step 1. You can let other people on the network view and edit your files or view them only. If you want to protect your files from tampering, remove the tick from Allow Other Users To Change My Files. There are a variety of ways to access a shared folder. Here's one way: Click Start -> My Network Places -> View Workgroup Computers. Click the computer whose files you wish to access and then click the shared folder. You can create shortcuts to shared folders to make them easier to gdfgf

Sep 08, 2007 | Computers & Internet

1 Answer

What is BOOTP/DHCP?


BOOTP stands for Bootstrap Protocol. DHCP stands for Dynamic Host Configuration Protocol. Both are mechanisms to dynamically assign an IP address for a TCP/IP client by the server. In this case, the Prestige 310 Internet Access Sharing Router is a BOOTP/DHCP server. Win95 and WinNT clients use DHCP to request an internal IP address, while WFW and WinSock clients use BOOTP. TCP/IP clients may specify their own IP or utilize BOOTP/DHCP to request an IP address.

Feb 19, 2006 | Zyxel Prestige 310 (AM406100) Router

Not finding what you are looking for?
Norton SystemWorks 2005 Premier Retail Box (NORTONSYSTEMWORKS2005PREMIER) Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Norton Computers & Internet Experts

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Frank Zabroski
Frank Zabroski

Level 2 Expert

268 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Norton Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...