Question about Hotpoint Ultima WD72 Front Load Washer/Dryer
If the machine des not stop filling and cycle hang in position, then it is a faulty water level switch.
If the machine does not stop filling , and the cycle goes on, then test that the inlet valve is not stuck in open position, if the inlet valve is OK, replace the timer control assembly.
Posted on Mar 07, 2009
Tips for a great answer:
Mar 25, 2015 | Washing Machines
Feb 16, 2013 | Kenmore Calypso
Mar 22, 2012 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Sep 24, 2011 | Estate Washing Machines
Aug 29, 2010 | Kenmore Washing Machines
Apr 05, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...
Apr 30, 2009 | Washing Machines
May 22, 2008 | Whirlpool Duet GHW9150P Front Load Washer
Apr 26, 2008 | Washing Machines
93 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: