Question about Samsung WF337AA Front Load Washer

1 Answer

Appliance engineer in Fleetwood just started doing Samsung and LG. Can you tell me where to find error code listings? Regards Mike.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 86 Answers


Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does an F-1 code mean on the display? washer will not start.

power problem

  • Whirlpool Fault Codes - > Appliance Repair Whirlpool Range / Stove / Oven Fault Codes: Failure Code: Fault Code Description: Solution: 4 Digit Failure Codes (for 2 digit codes see below) F1 - E0
  • Washer Diagnostic& Repair - F1 Error Code power supply ...
    • 4 MIN
    2014-02-07 · Troubleshoot your trusty Whirlpool Top Load Washer that has these following symptoms: F1 Error Code At: To ...
  • Whirlpool Cabrio f1 error and how to fix it Control board W10189966 will work with the Whirlpool model numbers listed at the bottom of this page. These models include the Maytag Bravos and Kenmore Oasis.
  • whirlpool F1 code - Appliance Repair Forum > ... > Washer Repair
    • 68 POSTS
    • FIRST POST: 2008-07-28
    2009-09-29 · Discuss whirlpool F1 code in Washer Repair. "whirlpool cabrio washing machine displays f1 code. have already pushed cancel and restart to no avail.
  • Cabrio Washer by Whirlpool F1 Error Code - Facebook Cabrio Washer by Whirlpool F1 Error Code. 793 likes. Got the F1 Error Code? Tell your story! Share ALL your issues with this washer to warn others...
  • Whirlpool Fault Codes - Appliance Help Online Whirlpool Range / Stove / Oven Fault Codes: Failure Code: Fault Code Description: Solution: 4 Digit Failure Codes (for 2 digit codes see below) F1 - E0

  • May 04, 2016 | Whirlpool WTW8200YW Cabrio Top Load Washer

    2 Answers

    Whirlpool Duet Sport Error Codes


    Can you please tell me what error code your getting so that i can tell you what it means..

    Waiting for your reply..

    Apr 21, 2008 | Washing Machines

    1 Answer

    How do i fix error code AE on LG washer/dryer f1407adsp5


    Error AE is prompted when there is a leak detected at the base of the appliance or when the anti flood safety device gets activated.

    Disconnect power by unplugging power cord or resetting circuit breaker.

    While power is off remove any water present at the base of the appliance.

    If there is no water, check the pressure switch, wiring and control board for faults that may result in error AE. Check also setting of the drain hose at the back (it may cause siphoning), and make sure that inlet valve is not leaking.



    Aug 28, 2011 | LG WM-2277HW Front Load Washer

    1 Answer

    Washer LG wd80264tp showing on dislay CL and not starting

    Hello there and welcome to fixya
    This is a very common error code this stands for child lock
    LG washing machines indicating error code CL may have the child lock activated. Try holding down the temperature and eco/rapid options together to turn off child lock. you may have to hold them down for a min of 3 sec and you should see it return back to normal
    You can also unplug the machine for 1 hour to allow for the internal reset feature to reset the memory module ok
    Hope this helps
    Best regards Mike

    Aug 08, 2011 | LG Washing Machines

    1 Answer

    Why does it constantly fill with water and displays tl error code?

    Hello there and thank you for choosing fixya:
    This is a very common problem with these machines the problem is that the water inlet valve has a set of solenoids on it one for the hot and one for the cold these solenoids go out or get stuck open and will continuously let water into the machine
    So what you are going to have to do is to remove the power to the machine and remove the outer shell of the machine to get axcess to the water valves it is recommended to simply replace the water inlet valve in the long run this will be more cost effective ok if you have a appliance parts store in your town simply tell them what the make and model number of your machine is and tell them you need a water inlet valve and they will be able to get you one they are about 65 to 100 dollars ok?
    Hope this helps
    Best regards MIke

    May 07, 2011 | Maytag Washing Machines

    1 Answer

    LG front loader washing machine UE error displayed

    Imbalance error
    Load too small
    Appliance is tilted
    Laundry gathered to one side
    Non-distributable thangs are put into washer.

    Here is the WM2277 Service Tech Manual

    You will find a list of fault codes on page 17 of it.
    Note: This is is not a user manual it is the repair manual.

    I have assembled some common problems and the solutions on the washer HERE

    Nov 17, 2010 | LG WM-2277HW Front Load Washer

    1 Answer

    Getting a UE code on LG front load washer

    Hello there
    UE - Unbalance switch error Unbalanced load is sensed three times during a spin operation. Open lid. Rebalance laundry load and close lid.
    · Check wiring harness
    · Check unbalance switch
    · Check circuit board Normally this turns out to be the unbalance switch that has failed and needs to be replaced so i would have this checked first.
    If you have a warranty on this machine still you should be able to use it ok?
    Hope this is very helpful or you.
    Best regards Mike

    Sep 26, 2010 | Washing Machines

    1 Answer

    My LG WF-TH700 washing Machines out with error dE.

    Hello there:
    This error code can sometimes also be shown as de or lid on the display. this error code is telling you that the lid switch may be faulty or that the ecu / electronic controle unit is bad and needs to be repaired so i would first have the lid switch checked and replaced if faulty also have the ecu checked and replaced if found bad .
    also 1 thing you can try is to make sure the machine is empty and run a cycle like you would normally would and see if it reoccurs if it does than you will know it is one of the 2 that i mentioned but if it does not than you have a problem in the balancing or load sensor ok?
    Hope this is very helpful for you
    est regards Mike

    Sep 26, 2010 | LG Washing Machines

    1 Answer

    Error code tE, customer service recommended replacing thermoster, replaced but still getting error code. Can it be something else or does something have to be rest?

    Ive looked through a service manual for your washing machine and that give the exact same fault and solution you mentioned (tE = Heater Error - The THERMISTOR is out of order)
    Here is the service manual for you to look at:
    WM-2277HW Service manunal
    I had to scroll down to the troubleshooting section though but it has everything you would need to know in it.
    I hope it helps

    Mar 24, 2010 | LG WM-2277HW Front Load Washer

    1 Answer

    Maytag error code F My Nepturn washer stopped midcycle and the panel is flashing F What is wrong?

    have a look at this manual:
    Maytag manual
    Its a PDF file but should open automatically and could take a minute or so depending on your internet speed.
    Scroll down to page 15, this will show and tell you what the error codes mean.
    I hope this helps

    Mar 22, 2010 | Maytag MAH6700AWW Neptune Front-Load...

    Not finding what you are looking for?
    Samsung WF337AA Front Load Washer Logo

    Related Topics:

    63 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Samsung Washing Machines Experts

    Todd Marr
    Todd Marr

    Level 2 Expert

    77 Answers

    D. E. Hev

    Level 3 Expert

    1059 Answers

    Chris Haynie

    Level 1 Expert

    3 Answers

    Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides