Question about Bernina Artista 180

1 Answer

I have the same problem my windows xp and Bernia emb.

I have the same probles my windows xp and Bernia emb. Software v.3 won't work with the patch. Bernia has quit posting this patch. Does any one still have this patch or an idea wher to get it.

Posted by on

  • looperinc Apr 14, 2009

    Can not move new patterns from the computer to the PC card. Computer program tells me the patterns have been moved but when I check the card they have not. Also the download light on the card reader never comes on. Only the power light and card inserted light are on.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I kept an older, XP laptop with paralell port just for embroidery and machine knitting software programs. Bernina, etc, never have up to date drivers unless you buy the current stuff - very poorly supported considering the costs involved.

At one point, the Hasp4 driver upgrade was posted on the bernina site and on the alladin site - 2004 o4 2005. The alladin (sp?) site still has hasp4 drivers available for download, but they are newer, and I don't know if they will work for you.

I will try and find my older hasp4 upgrade, although my searches have produced nothing so far, and I am not sure exactly what the file was called.

Posted on May 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Changing from windows XP to Vista


If you are talking about Bernina artlink software here is a patch, but you nbeed to register. Check it out

Feb 25, 2008 | Bernina Artista 180

1 Answer

Need a patch for Singer Futura XL400 windows 7


I don't why you need a patch for Win 7; the software was created for and works on Windows XP, Win 7 and Win 8 without alteration. However, there IS an update patch available at the Futura support site, www.futura-support.com. Click the My Machine model link at the top, select your machine, and then select Software on the left, and you can download the patch.

Jun 29, 2014 | Singer Futura XL-400 Computerized Sewing...

1 Answer

I can not get my singer futura ce200 to work on windows 7 64 bit or where i can get the 2.5 upgrade patch from singwer futura suport .com have a patch but wont work in win 7 64 bit even though it says so...


As far as I can tell most computerized machines won't work with Vista or Windows 7 (64). The only solutions I have seen work is to either have your computer re-formated and partitioned and installed with a dual operating system.

Or...

Go buy a used machine that already has Windows XP

Aug 28, 2012 | Singer Sewing Machines

1 Answer

Setup


If you want to sew with it, don't hook it up to the computer. You only need to connect it for embroidery.
There is a patch for the ce-200 software at
futura-support.com/downloads/patch.htm
I installed the XP patch and told Windows to run the software as an XP program.

Nov 30, 2011 | Singer CE-200 Quantum Futura Computerized...

1 Answer

I cannot seem to down load my software onto my computer tried it on vista tried it on windows 7 i am peeved


Have you downloaded the patches for your software to upgrade to Vista? I would suggest that you visit the Singer support page on their website and read through the patches information.

http://www.futura-support.com/downloads/patch.htm

Your software is probably built for XP operating system so you would need to patch it for the newer Vista - there is not yet a patch for Windows 7.

Oct 10, 2011 | Singer CE-200 Quantum Futura Computerized...

1 Answer

My embroidery (Singer Quantum XL6000) requires the Windows XP and lower on a computer to acquire additional patterns, will it work with Windows 7?


Mine works with Vista. :)
Just install the XP patch (futura-support.com/downloads/patch.htm) and tell Windows 7 to run the software in XP mode.

Oct 07, 2011 | Singer CE-200 Quantum Futura Computerized...

2 Answers

Looking for an internet site that offers a patch for Kenmore (Janome)R/W 19000 embroidery software for Windows XP. The orig software is only compatible with Windows 95 and MS Word. Thanks so much.


I was informed there was no patch. The software was formated for windows 95 and will only work with that software. you can pick up a computer for less than 100 with that old windows system-- that is what I did.

May 08, 2010 | Kenmore 19001

1 Answer

Futura CE-200 Software fails to initialize on XP sp2


Maybe you should try to contact singer south africa and ask them whats wrong, my laptop did the excact same thing switch over to home pc and no problem ever again.

Mar 02, 2009 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Sewing Machines Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bernina Sewing Machines Experts

andika2000

Level 1 Expert

28 Answers

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Bernina Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...