Question about Hampton Bay 60 In. St. Regis Fan, Ancient Bronze
Where do i go into the fan to replace this part. i have the new part just need directions to put in
I have a hampton bay ceiling fan with light fixture all connected to a wall switch and controled by a remote. The light does not work any more and I have replaced the bulb with three different light bulbs and it still won't work. There is a green wire coming off the bracket but there is no ground wire coming in from above. There are two wires coming in from above ( the box in the Attic)
one white and one black and they are connected properly. All the wires are taged from the remote receiver, the fan and the light and are correctly connected. Any suggestions?
Posted on Mar 30, 2008
My fan just stopped working - no lights no fan :( and I just can't seem to find any type of switch - only the remote, which lights up just fine. Can anyone help???
Posted on Jun 08, 2008
No fan disassembly, just the houseing mounted to the ceiling. the transmitter is in there. U can try and match it to a new remote or look for some number on the transmitter. However u can usually buy a new remote and transmitter for 30 bucks and just swap out the transmitter. They come labeled and r pretty easy to install.
Posted on Jun 12, 2008
SOURCE: disassembly insrtuctions
Get up there with screwdrivers and find out! You need that funky fanblade-driver tool first, but once you get the blades off and things cleaned, you can deal with pulling guards off and finding the key screw to the ceiling ball retainer, etc. Don't forget to get the breaker off before you get down to the wire nuts....
Or: Craigslist the old one and require the buyer to get it down.
Posted on Aug 16, 2008
go to Home Depot, not only do they have replacements, but they can order for you what you need. Hampton Bay is the Home Depot brand.
Posted on Mar 31, 2009
hi there i can help. There is a "dip switch" on nearly all fan remote units, much like a garage door opener has. To keep all the fans in your home from operating at one time, each fan needs a seperate "code". To use your other remote, you need to locate the receiver unit in the fan, usually in the "canopy". This is the bowl looking piece against the ceiling. then note the "code" which is the position of the switches. For instance, most have a block with 4 switches, and if the first is "on", and the remaining are "off", that is it's set code. This "code" can be changed to any combination of "on , off" that you like. BUT, you must also open the remote control and set it's switch to the exact same "Code", or order of "on off" as your Fan receiver. (Usually the control "Dip switch" is in the battery compartment.
Posted on Jun 20, 2009
Tips for a great answer:
Oct 20, 2015 | Hampton Bay Fans
Aug 24, 2015 | Hampton Bay 46056 Callaway II Ceiling Fan
Nov 05, 2010 | Hampton Bay 52 In. White Redington...
Apr 20, 2009 | Hampton Bay 52 In. White Redington...
Jan 03, 2009 | Hampton Bay 24750 Huntington III Ceiling...
Aug 19, 2008 | Hampton Bay 52 In. Brushed Nickel Romano...
173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: