Question about Samsung L200 Digital Camera

1 Answer

How do I set the start image? I've tried following the menu commands, but when I select "Start Image," my options are the logo, "off," and then a black box with a question mark. I've selected it, and it shows the option set for "user image," but no start image shows up when I turn the camera on.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After going through the menu and choosing user image, view the picture you would like to set as your start image. Press the button with the E on it that is underneath the zoom button. The screen should then show four images across the top, say the word "RESIZE" under that, and have the numbers 7,5,3,and 1 down the left hand side of the display. Below the number one there is an icon of a person and a camera. Scroll down to that icon and press the OK button. Your start image should now be chosen. Turn you camera off and power it back up to see if it worked. Hope this helped.

Posted on Mar 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Repair start up


i found this very good guide: 1. If your operating system is XP, CTRL and F11 key simultaneously when you see the dell logo after turning on the Laptop and follow the screen instructions.

* Power the computer on.
* When the Dell screen appears press and hold the CTRL and F11 key simultaneously on the keyboard, then release them both at the same time.
The Dell PC Restore by Symantec window appears.
* Click the Restore button or press the key to highlight Restore and press the key.
A caution message appears advising that all data will be lost.
* Click the Confirm button or press the key to highlight Confirm and press the key.
The Progress window appears. Once the process is begun, Dell PC Restore usually takes only 8 to 10 minutes to complete.
When the restore is complete, the message The system recovery process was successful appears.
* Click the Finish button or press the key to highlight Finish and press the key.
The computer will restart.

2. If your operating system is VISTA / Win 7, tap F8 key when you see the dell logo. It will take you to advanced boot menu options under which you will see Repair your Computer, Select that option and enter your password if it asked, then you will be seeing list of options like system restore, command promt, etc., In that the last option says Dell PC restore or some thing like that. Select that option and follow the screens .. Thats it.

* Start the computer.
* As the computer starts, press the F8 key until the Advanced Boot Options menu appears on the screen.
* Press the (Down Arrow) to select Repair Your Computer on the Advanced Boot Options menu, and then press Enter.
* Specify the language settings that you want, and then click Next.
* Log in as a user who has administrative credentials, and then click OK.
* Click Dell Factory Image Restore.
* In the Dell Factory Image Restore window, click Next.
* Click to select the check box for Yes, reformat hard drive and restore system software to factory condition.
* Click Next. The computer is restored to the default factory configuration.
* When the restore operation is completed, click Finish to restart the computer.

3. If in both case, the Factory default didn't work, then your laptop's factory image defaults partition have vanished (i.e. Corrupted / Deleted). So you have to do Operating System re installation with the Operating System CD / DVD shipped along with laptop. Follow the below link to install windows XP Pro on your own.

Feb 01, 2014 | Dell Inspiron 6400 Notebook

1 Answer

Reboot to factory settings for Dell


Try This:

If your operating system is XP, press the CTRL and F11 keys simultaneously when you see the Dell logo after turning on the laptop, and follow the instructions on the screen.
  • Put the computer on.
  • When the Dell screen appears, press and hold the CTRL and F11 key simultaneously on the keyboard, then release them both at the same time. The Dell PC Restore by Symantec window appears.
  • Click the Restore button or press the key to highlight Restore and press the key.


A caution message appears, advising that all data will be lost.
  • Click the Confirm button, or press the key to highlight Confirm and press the key.


The Progress window appears. Once the process has begun, Dell PC the restore usually takes only 8 to 10 minutes to complete. When the restore is complete, the message 'The system recovery process was successful' appears.
  • Click the Finish button or press the key to highlight Finish and press the key.


The computer will restart.
For Vista or Win 7
If your operating system is VISTA / Win 7, press the F8 key when you see the Dell logo. It will take you to the advanced boot menu options, which include 'Repair your Computer'. Select that option and enter your password if asked, then you will see a list of options like 'system restore' and 'command prompt'. The last option says 'Dell PC restore', or something along those lines. Select that option and follow the instructions on the screen.
If in both cases, the Factory default doesn't work, then your laptop's factory image defaults partition has vanished (i.e., been corrupted / deleted). In this case you will have to reinstall the operating system with the CD or DVD shipped along with the laptop. Follow the link below to install windows XP Pro on your own.
  • Start the computer.
  • As the computer starts, press the F8 key until the Advanced Boot Options menu appears on the screen.
  • Press the down arrow to select Repair Your Computer on the Advanced Boot Options menu, then press Enter.
  • Specify the language settings that you want, and then click Next.
  • Log in as a user who has administrative credentials, and then click OK.
  • Click Dell Factory Image Restore.
  • In the Dell Factory Image Restore window, click Next.
  • Click to select the check box for Yes, reformat hard drive and restore system software to factory condition.
  • Click Next. The computer is restored to the default factory configuration.
  • When the restore operation is completed, click Finish to restart the computer.


In both cases, if the factory default does not work, then your laptop's factory image defaults partition has vanished (i.e. been corrupted / deleted). In this case you will have to reinstall the operating system with the CD or DVD shipped along with the laptop. Follow the below link to install windows XP Pro on your own.

Good Luck!

Aug 20, 2012 | Dell Inspiron B120 Notebook

2 Answers

Hi my laptop wont go to windows , it just saying prepare boot to os . can anyone help please


Windows may not be starting due to a driver problem. In any case, see if you can get into the Windows Advanced Options Menu as follows...
1. have the ac adapter connected
2. power on the laptop and watch the screen
3. when the Acer logo is showing, press F8 repeatedly
4. Windows Advanced Options Menu should now start
5. once you are in the Menu, use the up and down arrow keys to select an option
You could try starting with ...
Last Known Good Configuration (your most recent settings that worked)
OR
Safe Mode
where you could do a System Restore to an earlier date when the system was working
If none of this works and you don't have any user data that needs to be saved, then do as follows.
All Acer netbooks have a factory install image on a hidden partition of the hard disk. Suggest you should re-install the original windows factory image. All user data on the C: drive will be cleared by Acer eRecovery which you would start up as follows....
1. have the netbook connected to its AC adapter which is plugged into AC power line
2. power on the netbook and watch the screen as it starts up
3. when the acer logo is showing, hold down the Alt key and press F10 repeatedly
4. until screen indicates Acer eRecovery is starting
5. once eRecovery is loaded, follow the directions given on the screen

May 08, 2011 | Acer Aspire 5315 Notebook

1 Answer

Purchased Inspiron Mini 1012 Win 7 Started - was told it was new, but is not. How do I restore it to its original factory settings?


Hi suscarsimba,

Welcome to FixYa! How are you doing?

Please try the following steps:

  • Tuen on your computer, Start tapping the F8 key repeatedly until the Advanced Boot Options menu appears on the screen.
Note:
You must press F8 before the Windows logo appears on the screen. If you press F8 after the Windows logo appears, the Advanced Boot Options menu does not appear on the screen. If you do not see the Advanced Boot Options menu, restart the computer, and then repeat this step until you see the menu on the screen.

  • Press the (Down Arrow) to select Repair Your Computer on the Advanced Boot Options menu, and then press Enter.
  • Specify the language settings that you want, and then click Next.
  • Log in as a user who has administrative credentials, and then click OK.
  • Click Dell Factory Image Restore.
  • In the Dell Factory Image Restore window, click Next.
  • Click to select the check box for Yes, reformat hard drive and restore system software to factory condition.
  • Click Next. The computer is restored to the default factory configuration.
  • When the restore operation is completed, click Finish to restart the computer.

Hope it helps. Thank you for using FixYa.

Apr 21, 2011 | Dell Inspiron Mini 1012 Netbook PC

1 Answer

72% memory gone and i purchased this laptop for schooling andi cannot do anything and want to whipe everything out and restore factpory settings


The process is called Dell Factory Image Restore. You can look it up on Google, or you can follow these steps from http://support.dell.com/support/topics/global.aspx/support/kcs/document?&docid=DSN_353562&isLegacy=true
If you have files or data you can't lose, you can back it up before Dell Factory Image Restore and restore it all after. Full instructions at http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_336966&isLegacy=true
  • Restart the computer. To do this, click Start, click the arrow next to the Lock button, and then click Restart.
  • As the computer restarts, press the F8 key until the Advanced Boot Options menu appears on the screen.
    Note: You must press F8 before the Windows logo appears on the screen. If you press F8 after the Windows logo appears, the Advanced Boot Options menu does not appear on the screen. If you do not see the Advanced Boot Options menu, restart the computer, and then repeat this step until you see the menu on the screen.
  • Press the (Down Arrow) to select Repair Your Computer on the Advanced Boot Options menu, and then press Enter.
  • Specify the language settings that you want, and then click Next.
  • Log in as a user who has administrative credentials, and then click OK.
  • Click Dell Factory Image Restore.
  • In the Dell Factory Image Restore window, click Next.
  • Click to select the check box for Yes, reformat hard drive and restore system software to factory condition.
  • Click Next. The computer is restored to the default factory configuration.
  • When the restore operation is completed, click Finish to restart the computer.

Mar 29, 2011 | Dell Inspiron 1521 Notebook

1 Answer

Where is refresh key in my dell inspiron laptop 1542


For Vista or Win 7
If your operating system is VISTA / Win 7, tap F8 key when you see the Dell logo. It will take you to advanced boot menu options which include `Repair your Computer'. Select that option and enter your password if asked, then you will see a list of options like `system restore', `command prompt', etc. The last option says Dell PCicon1.png restore or something similar to that. Select that option and follow the screen.


Start the computer.
As the computer starts, press the F8 key until the Advanced Boot Options menu appears on the screen.
Press the (Down Arrow) to select Repair Your Computer on the Advanced Boot Options menu, and then press Enter.
Specify the language settings that you want, and then click Next.
Log in as a user who has administrative credentials, and then click OK.
Click Dell Factory Image Restore.
In the Dell Factory Image Restore window, click Next.
Click to select the check box for Yes, reformat hard drive and restore system software to factory condition.
Click Next. The computer is restored to the default factory configuration.
When the restore operation is completed, click Finish to restart the computer.

Feb 02, 2011 | Dell Studio 1737 Laptop

1 Answer

I can not get my Lexmark printer to print out an email I rec'dI have the Lexmark printer X2650 please help me. i unpluged it and truned it off and back on again nothing happens.


To be sure that the issue was caused by the enabled Image Sharpening option, do the following:
Go to Control Panel > Administrative Tools > Event Viewer > Application, and look for entries that start with the Error sign, as in the table below:
Windows XP pattlnk_5142009_1243-err.jpg Windows Vista pattlnk_5142009_1244-err_v.jpg
After opening it, look for entries that report faulting application, such as spoolsv.exe, and the faulting module is lx??ibuf.dll. See image.
If using Windows Vista 64-bit, one might also see this error message (click on the link to view image).
Solution

Windows XP Click Start, then select Printers and Faxes. Right-click the Lexmark printer, and from the drop down menu select Printing Preferences.
Go to Image Enhancement and deselect the Image Sharpening option. See image.
Windows Vista Click Start (Ribbon), then select Control Panel. Click on Hardware and Sound and from the list select Printers. Right-click the Lexmark printer, and from the drop down menu select Printing Preferences.
Go to Image Enhancement and deselect the Image Sharpening option.
See image.

Jan 18, 2011 | Lexmark X2600 InkJet Printer

1 Answer

All i want to know is HOW DO YOU REBOOT A DELL INSPIRON 1545 TO FACTORY SETTINGS I DON'T HAVE THE MONEY TO TAKE IT IN.


Windows Vista: Dell Factory Image Restore
  1. Turn on the computer. When the Dell logo appears, press several times to access the Vista Advanced Boot Options window.

  2. Select Repair Your Computer.

The System Recovery Options window appears.

  1. Select a keyboard layout and click Next.

  2. To access the recovery options, log on as a local user. To access the command prompt, typeadministrator in the User name field, then click OK.

  3. Click Dell Factory Image Restore.

note.gif NOTE: Depending upon your configuration, you may need to select Dell Factory Tools, then Dell Factory Image Restore.

The Dell Factory Image Restore welcome screen appears.

  1. Click Next.

Nov 09, 2010 | Dell Inspiron 1545 Notebook

1 Answer

How do i restore factory setting for dell 1545


Windows Vista: Dell Factory Image Restore
  1. Turn on the computer. When the Dell logo appears, press several times to access the Vista Advanced Boot Options window.

  2. Select Repair Your Computer.

The System Recovery Options window appears.

  1. Select a keyboard layout and click Next.

  2. To access the recovery options, log on as a local user. To access the command prompt, typeadministrator in the User name field, then click OK.

  3. Click Dell Factory Image Restore.

Nov 04, 2010 | Computers & Internet

1 Answer

I have 5 Dell 4310 WX projecors and I would like to display my logo when they start-up. Can this be done with the projector only or is a laptop necessary for this to happen?


I believe the Dell logo is hard-coded for the Startup, but you can change the Wallpaper form the Dell logo, to an image of your choice:

From the Setup Menu, or Others Menu, you can go into:
SCREEN SETTINGS—Select and press checkmark to activate screen settings. The screen
settings menu consists of the following options:

CAPTURE SCREEN—Select and press checkmark to capture the screen display, the following message appears on the screen.

NOTE: To capture a full image, ensure the input signal that is connected to the projector is 1280 x 800 resolution.

SCREEN—Select Dell to use the Dell logo as wallpaper. Select Captured to set the captured image as wallpaper.

RESET—Select and press to delete the captured picture and set back to the default setting.

More information available on the Manual here: http://support.dell.com/support/edocs/acc/4310WX/en/ug/pdf/4310WX_en.pdf

Jan 14, 2010 | Compaq Presario M2000 Notebook

Not finding what you are looking for?
Samsung L200 Digital Camera Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

kakima

Level 3 Expert

98792 Answers

Cindy Wells

Level 3 Expert

4804 Answers

Kirk Augustin
Kirk Augustin

Level 3 Expert

2019 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...