Question about Brother LS-2125 Mechanical Sewing Machine

1 Answer

Brother sewing machine

For model vx808
I was in the middle of a sewing project when the machine came to a hard stop. I have loosened and re-tightened the stop motion knob, but that did nothing. When manually rotating the knob, it will not move at all. I removed the top and both sides of the machine and cnnot figure out why the needle won't move up and down. The motor makes a familiar sound when I push the peddle, but there is no motion. Can anyone give me advice on how to resolve the problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 374 Answers

There is cluch on the handwheel that connect motion,try to tighen this If negative,There are two small bevel gear (hard PVC )connecting to the upper crankshaft where the handwheel was connected.This transmit motion when motor run, most commonly the vertical rod where one bevel gear was connected maybe broken or viceversa at the upper crankshafting that holding the bevel drive gear is broken try to check this.

Posted on Mar 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a belt on model vx810


Hello again Mary

Your manual is here but nothing about changing belts!
http://www.manualslib.com/manual/219387/Brother-Vx-810.html?page=36#manual

  • Brother VX810 Sewing Machine Parts www.sewingpartsonline.com > Home > Brother Parts
    • 4.8/5
    • 68K RATINGS
    Brother VX810 Parts These parts and accessories are guaranteed to fit your Brother VX-810 Sewing Machine. View Parts. ... Motor Belt 20 7/8", Singer #130944-001
  • BROTHER SEWING MACHINE Parts ' Model VX810 - Sears ... www.searspartsdirect.com/model-number/VX810/0150/1220000.html Shop for BROTHER SEWING MACHINE repair parts for model VX810 at Sears ... manuals & diagrams for any BROTHER Mechanical Sewing Machines repair project. ...
  • Brother VX-810 sewing machine - YouTube www.youtube.com/watch?v=toFRHM3fsfo
    • BY TPERSELLIN
    • 19 SEC
    • 7.1K VIEWS
    2013-05-14 · Video embedded · Brother VX-810 sewing machine TPersellin. ... Threading a Brother DB2-B735 Industrial Sewing Machine & Sewing Various Stitch ...
  • BROTHER VX-810 USER MANUAL Pdf Download. www.manualslib.com > ... > Brother Manuals > Sewing Machine > VX-810 Brother VX-810 Sewing Machines: Users Manual. VX-810 Sewing Machine pdf manual download. Sign In. Upload. ... VX-810; User manual; Brother VX-810 User Manual.
  • BROTHER SEWING MACHINE BELT VX800 VX802 VX807 X808 ... www.ebay.co.uk > ... > Machine Parts & Attachments BROTHER SEWING MACHINE BELT VX800 VX802 VX807 X808 VX809 X810 in Crafts, Sewing & Fabric, Sewing ' eBay. Skip to main content. eBay: Shop by category. Enter ...
  • Belt Motor Brother VX807 VX808 VX809 VX810 VX847 ... - eBay www.ebay.com/itm/BELT-Motor-Brother-VX807-VX808-VX809-VX810-VX847... BELT Motor Brother VX807 VX808 VX809 VX810 VX847 VX880 VX890 VX900 VX920 VX940 + in Crafts, Sewing & Fabric, Sewing ' eBay
  • Replace Belt ' Brother support.brother.com/g/b/faqend.aspx?c=ca&lang=en&prod=mfc9970cdw... Replace the belt unit following the steps below: ... *If your Brother machine has a Touchscreen, please follow the steps under "For Touchscreen models" below.
  • Sewing Machine Parts - Brother Parts - Brother VX-810 ...
  • www.thesewingoutlet.com/brother-vx-810 Change Currency. Loading... Please wait... ... Brother Parts; Brother VX-810; Sort by: ... Brother VX-810. Sort by: ...


  • http://www.bing.com/search?q=change+a+belt+on+brother+vx810&qs=n&form=QBRE&pq=change+a+belt+on+brother+vx810&sc=0-30&sp=-1&sk=&cvid=F80CBC7C1B0340DFBBA06B46207E0E5E

    Jun 18, 2016 | Brother Sewing Machines

    1 Answer

    The Balance Wheel and the Clutch Release knob will not tighten together again after filling a bobbin. How do I fix this?


    THERE IS A SMALL SCREW AT THE MIDDLE KNOB ON THE HAND WHEEL THAT YOU NEED TO LOOSEN. AFTER THAT TIGHTEN THE HAND WHEEL KNOB JUST AS YOU WOULD WHEN YOU ARE GOING TO SEW. NOW, TIGHTEN THE SMALL SCREW. YOUR MACHINE SHOULD BE OK FOR SEWING AND YOUR BOBBIN WINDING.

    Jan 07, 2015 | Brother Sewing Machines

    1 Answer

    Need power cord


    Go online to the Brother site for Australia. They should be able to supply the chord for you.

    Jan 19, 2014 | Brother VX808 Sewing machine

    1 Answer

    I have a BROTHER DISNEY pe770 EMBROIDERY MACHINE, THE THREAD IS BREAKING


    Upper thread breaks--needle may be in backwards--

    Correct needle insertion is mandatory for proper use of sewing machine.
    Raise the needle bar to the highest point, then loosen the clamp screw to remove the old needle, place the new needle in the clamp with the flat side to the back of the machine or if using a round needle--the groove in the needle should face away from the shaft.
    Push the needle all the way up to the stop or as far as it will go, then tighten the needle clamp screw

    Mar 24, 2012 | Brother PE770 Computerized Sewing Machine

    1 Answer

    VX808/Vx809. When put pressure on foot control stop motion contro doesn't move.


    I would suggest that the machine needs to be serviced to find out why it not responding the way it should.

    Mar 22, 2012 | Brother Sewing Machines

    1 Answer

    Brother sewing machine


    I have only a cheap one (VX-1100), but when this is happening on mine, the stop-motion knob isn't fully engaged with the balance wheel. They are held together by one being tightened to the other for sewing, loosened for bobbin winding. Michael

    Aug 31, 2008 | Sewing Machines

    Not finding what you are looking for?
    Brother LS-2125 Mechanical Sewing Machine Logo

    268 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Brother Sewing Machines Experts

    Bargain Box
    Bargain Box

    Level 3 Expert

    1388 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18333 Answers

    Irene Tulloch

    Level 2 Expert

    449 Answers

    Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...