Question about Jensen JER-822 Remote Control

1 Answer

I have two TVs running from one satellite receiver. One remote for each TV, they are not interchangeable. Neither of them will turn on their respective TVs, nor will they adjust the volume or mute. Each of them will change channels. I have spent a lot of time trying to reprogram them using many different codes without success. It is very frustrating. Can anyone help.

Posted by on

  • Ray Mar 08, 2009

    That is absolutely correct. The system is Bell ExpressVu in Canada.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Are they IR and UHF remotes

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to match up a triantianyong TV-139F universal tv remote to this LCD TV DVD combo.


Search Results

    Universal Remote Controls - Encompass Parts

    https://www.encompassparts.com/staticlist/Universal_Remote_Controls
    TVs made since 1988. Works Mitsibushi . TVs only. Will not operate. TV/VCR or DVD Combo units. ... fully operate yout TV. Full function replacement remote for ToshibaTVs made since 1988. ... 2004-2005 LCD TV's. ON/OFF, CHANNEL +/-, ...

    Universal TV Remote ' eBay

    www.ebay.com/bhp/universal-tv-remote

    eBayUniversal Remote Controller 6 IN 1 TV DVD VCR Satellite Receiver Cable Box Audio... control for Samsung LED/LCD TV is the lastest product, easy to operate and ...damaged or needs to be substituted, or when you dxxire to have a combi.

    Codes For Universal Remotes ' Universal Remote Control ...

    codesforuniversalremotes.com/

Feb 05, 2016 | Universal Remote Controls

2 Answers

I have RCA RLDED5099 Tv, but can't program it to work with my Bell satellite remote so I can then work My JVC THA35 home theatre..


Bell Satellite remote codes for RCA TVs: : 001,005,006,008,012,014,015,018,023,
025,035,066,077,085,121,124,131,133,135,
144,148,150,151,152,155,160,167,190,194,
222,223,225,227,232,236,245,248,268,269,
282,288,289,317,431,486, 492

Instructions for when the code for your device is not listed. Use this procedure to scan the remote control’s memory for the device code


1. Turn the device on (TV).
2. Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
3. Press POWER.
4. Press the UP or DOWN ARROW repeatedly until the device turns off.
5. Press POUND (#).
6 .Turn the device back on and try some other buttons to make sure they work
7. If necessary, repeat this procedure

How to program my Bell Satellite TV remote control

Apr 09, 2015 | RCA Remote Controls

1 Answer

Could someone please give me the 4 digit code for a Shaw direct satellite receiver as well as the code for a Hitachi big screen tv


1750,1772,1753,1730. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Oct 14, 2014 | RCA Remote Controls

1 Answer

I have 4 TVs using 2 receivers. TV 1 and 2 use receiver VIP722K. TV 3 and 4 used receiver 322G. I bought a new Vizio tv to replace TV 4. (Note: TV 2 is also a Vizio) I tried to set up the new Vizio...


Hi, Cheri Torres with DISH Network Customer Service here. Icame across your question and wanted to see if I could help. It sounds like youmay need to either readdress your TV4 remote to your 322 DISH receiver or youcould possibly have receivers for TV2 and TV4 mixed up. Since your TV4 has "Pressselect to watch TV" on the screen you can check both of your receivers andwhich ever receiver has the TV2 blue light off is the receiver this TV runs offof. If this is not the case and you are positive that the TV4 does run off the322 you will want to take the remote to the receiver box location in order toreaddress it. I will list here for you the instructions for readdressing theremote to the receiver box. I hope you find all this information useful and ifyou have any other questions or this does not fix the issue you are experiencingfeel free to email me at Cheri.Torres@Dishnetwork.com. Thanks and have a greatday!
Instructions for readdressing your remote to your DISH receiver
  1. Go to System Info screen. You can do this by pressing the power button once then the channel up button once on the front of the receiver box.
  2. Once you are in the system info screen you will see primary remote address and secondary remote address.
  3. Hold down the SAT button until all mode lights light up.
  4. Enter a number between 1 and 15 using the numeric keypad on the remote.Change the number to something different then what is already listed in the little white square for secondary remote address.
  5. Press the pound (#) button
  6. Once the SAT button blinks three times, press record. Note: If successful the number selected in step 4 will appear in the System Info screen under Remote Address.

Feb 16, 2011 | DISH Network IR Remote Control

1 Answer

I chose the wrong channel on remote it took me to a Dish site whcih I chose to exit - when I did that my picture totally disappeared - could not get it back. It is fine on my other tvs - so I need to get...


Guest

Are you getting a snowy/blue/black screen on your TV? To get your picture back, you need to get the TV back to the correct channel or input. If the receiver is in the same room as this TV, the TV should be on channel 3/4 (normally 3) or an input setting depending on the TV. TV 2 (away from receiver) would be on channel 60/73. If you have the TV remote, put the TV on one of those channels. If you get a picture when the TV is placed on the correct channel, press and release the SAT button. This puts the remote back in SAT mode and will now operate the receiver.

If you don't have a picture, unplug the receiver for 10 seconds from the electrical outlet and plug back in. This will cause the receiver to reboot and re-acquire Satellite signal. i hope this helps.

Ray Calo
DISH Network

Jun 30, 2010 | DISH Network IR Remote Control

1 Answer

Dish IR Remote 20.0 has problems after sunset.


The problem for me was the TV giving off IR signals that interfered with DISH's poorly designed remote. When the TV's room ambient light sensor was turned on and it became dusk outside the DISH remote would stop working. Moving the receiver away from the TV helps but the problem is not eliminated until the light sensor is turned off.
Until DISH corrects this poor design there may be no other viable solution.

Jul 09, 2009 | DISH Network IR Remote Control

1 Answer

MENU PICTURE ON TV BUT NO CHANNELS


This is a problem with weak signal strength, You will need to find a better place to put your television so it can receive enough signal to operate correctly. If this does not solve the problem, you will need to check the satellite box for problems with receiving the signal from the satellite. You may need help from the satellite company to check the signal strength output and input levels to make sure its working properly. I hope this information helps you solve you problem with the loss of satellite signal in your television. Thank you for using FixYa and have a nice day!

Jun 18, 2009 | RCA DIRECTV Satellite Remote Control

3 Answers

EchoStar 5.3IR from Dish Network not responding to Samsung tv


It seems the new, larger tvs these days put out too much light and it interferres with the remote signal. Simply put a post-it note or tape a piece of paper over the lights on the receiver and you have an affordable and instant fix. This isn't a good looking fix and I would be upset if the set were in a living room. Luckily ours is in the family room downstairs.

Apr 14, 2009 | One For All URC-4021 Remote Control

1 Answer

Harmony 880 remote will not turn on my dish 622 satellite receiv


Have you tried contacting your dish people, maybe they can reset.

Mar 07, 2009 | Logitech Harmony 880 LCD Remote Control

1 Answer

I have an RCA461 remote & Im trying to program it to TV2 on my satellite receiver which is Dish Network dual tuner which runs both tvs. Can this remote run TV2?


TV1 is in the room with the receiver, that portion is controled by infrared remote, TV2 is the remote tv portion of the receiver and is controlled by rf (radio frequency). Requires a special remote to operate

Feb 19, 2009 | RCA RCR460 Remote Control

Not finding what you are looking for?
Jensen JER-822 Remote Control Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Jensen Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...