Question about Philips Magnavox Learning Universal Remote
SOURCE: Philips universal sru 3030
Manual is available at following address.
Hope that helps,
Posted on Mar 17, 2008
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.
Programming with Code Search
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.
Hope this helps :)
Posted on Jun 18, 2008
Tips for a great answer:
Jan 26, 2010 | Philips Televison & Video
Feb 28, 2009 | Televison & Video
Aug 01, 2008 | Philips Magnavox Learning Universal Remote
Aug 22, 2007 | Philips PM3S Remote Control
374 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: