Question about LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

1999 Kenmore Microwave not heating at all



not heating -

-everything else works--what could be the problem?

Posted by on

  • Jeff Meyer May 11, 2010

    Your question about the Kenmore Microwave landed in the support area for Dishwashers. Specificly in the LG LDF5811 model.


    If the problem is not already resolved, I recommend you re-post it in the Microwave section and always provide the model number.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

Usual fault is the HIGH TENSION FUSE located between the transformer and magnetron in a porcelain holder, you can test it with a multimeter. Fuse is similar to a glass fuse used in cars .
Any other fault probably requires a tech.

BEWARE BEWARE BEWARE
Microwaves can hold hold a deadly charge in the capacitor long after disconecting from the power. Either short the capacitor or leave it alone for a week.

Posted on Jul 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore microwave, it will not heat up


I would call Kenmore Customer Support. May it is defect.

Jul 08, 2014 | Kenmore Dishwashers

1 Answer

Kenmore solid state microwave


Hello,
Every machine can be repaire but with some costs..
Now ..becaus ethe light was off..now you have problems with the board..or display..
Thanks God is exchangeable
Check the internet by part no. and you'll find it
Good luck

Jul 02, 2013 | Dishwashers

1 Answer

OUR KENMORE DISHWASHER MODEL #665.15912000 TIMER STALLS AT 43 MINUTES FOR AS LONG AS 30 MINUTES, AND THEN PROCEDES. OTHERWISE, EVERYTHING WORKS, AND THE DISHES COME OUT CLEAN.


Hello,

Your dishwasher is stalling while the water heats on the rinse cycle if the water is very hot the thermostat that must be satisfied for the water to reach the correct temp. is weak and it needs replacing. Or if the heat element is full of build up on the outside of it,it's taking so long to heat to temp.
this links shows the t-stat in item # 30 http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Dishwasher-Parts/Model-66515912000/0582/0130000/P0303177/00007?blt=06&prst=0&shdMod=66515912000

This one is the heat element item #1 http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Dishwasher-Parts/Model-66515912000/0582/0130000/P0303177/00007?blt=06&prst=0&shdMod=66515912000

I hope this helps

Gene

Aug 03, 2011 | Kenmore Dishwashers

1 Answer

Upper tray of Kenmore 13742 is not cleaning. Followed the Versastyle fix for rmussak on Mar 6,2009 to determine if chopper or motor needed replacing. Everything seems fine. What next?


Hi, I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works like new... However I have also foundthat if the heating element goes bad then that also can mess things up bad...So I would buy new spray arms, and also check out the heating element to makesure it is working... Here is a tip that will help you with the onlinebuying...
Dishwasher SprayArms not Spinning

How to Buy ApplianceParts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The HeatingElement not Working

DishwasherMaintenance DishwasherResidue and Film on Dishes

heatman101

Asker's Testimonial "explanation very clear. will give it a go and see howsimple it was. thanks Ronnie " - ronnieshomes

;
';
''

Mar 11, 2011 | Kenmore 13742 / 13744 / 13749 Built-in...

1 Answer

Our Kenmore dishwasher is a year and a half old and just started leaving a thick white film on EVERYTHING. I have tried a new detergent and cleaning it out with vinegar with no success. It seems like...


Hi,



I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and installed them in minutes...now the thing works like new... However I have also found that if the heating element goes bad then that also can mess things up bad... So I would buy new spray arms, and also check out the heating element to make sure it is working... Here is a tip that will help you with the online buying...


Dishwasher
Spray Arms not Spinning

How to Buy
Appliance Parts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The
Heating Element not Working

Dishwasher Maintenance

heatman101

Asker's Testimonial "explanation very clear. will give it a go and see how simple it was. thanks Ronnie " - ronnieshomes

Jan 05, 2011 | Kenmore Dishwashers

1 Answer

Dishwasher will not dry dishes


Hi,,
Try  this
Please rate my suggestion..

Apr 11, 2009 | Kenmore 24 in. 17512 Built-in Dishwasher

2 Answers

Lock Light Blinking


silly question but did you try holding the control lock button(perhaps its the heated dry button) in for 3 secs???? sonds as if the CONTROL LOCK has benn activated( child lockout)

Jan 14, 2009 | Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

Kenmore Dishwasher Not Cleaning


Hi,


I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and installed them in minutes...now the thing works like new... However I have also found that if the heating element goes bad then that also can mess things up bad... So I would buy new spray arms, and also check out the heating element to make sure it is working... Here is a tip that will help you with the online buying...

Dishwasher Spray Arms not Spinning

How to Buy Appliance Parts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

heatman101



k;kjguit

Jul 31, 2008 | Kenmore 24 in. 15142 Built-in Dishwasher

2 Answers

KENMORE DISHWASHER


First, turn the unit off at the breaker. Wait 5 minutes. Turn back on. That may reset everything. If not, we need to find out more about the code and what else is going on.

Dec 07, 2007 | Kenmore 24 in. 16019 Built-in Dishwasher

Not finding what you are looking for?
LG 24 in. LDS 5811 Built-in Dishwasher Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...