Question about Canon PIXMA MP830 All-In-One InkJet Printer
How do you send a fax on a cannon mp830
Posted on Jan 03, 2010
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: instruction manual
Open the top cover to the scanner, the lock switch is on the left hand side of the glass. It is about 1 1/2 inches oblong and SLIDES back and forth. The switch is black with 3 lines across it. Are you able to see it now? And your answer is ????
Posted on Oct 25, 2008
SOURCE: Canon Pixma MP830 error 5100
As a technician, I have worked on tons of printers. This particular error had stumped me for a while, but I finally found the cause. As others had pointed out before, it can have alot to do with some obstruction in the print path, the gears, or ink on the clear plastic encoder strip. You're on the right track - I found the the purge cap (the white sliding mechanism that the print head parks to when it's not in use) was not lubricated well enough from factory. If you lubricate the sliders with some white grease (don't get it on the small wipers or the black caps) the mechanism can now slide more freely, and the unit can park the head properly without giving you the dreaded head homing error 5100 (or E-2-2 on the LCD display) Keep in mind that this repair will probably require you to remove the right panel off of the printer to gain access to the purge mechanism. There are two screws behind the printer, and two in front for each corrosponding side panel (the front screws are behind the grey front panel of the printer - open the top cover to see the clips which hold the front cover on) Hope this helps some of you out.
Posted on Mar 09, 2009
The scanner lock switch may be in the locked position. Lift the cover and check the slide switch located on the top front left. If this is not the problem, you will have to have a service center look at the problem.
Posted on Dec 19, 2009
Tips for a great answer:
Mar 25, 2014 | Canon PIXMA MP830 All-In-One InkJet...
on Mar 11, 2010 | Canon PIXMA MP830 All-In-One InkJet...
Nov 19, 2010 | Canon PIXMA MP830 All-In-One InkJet...
Mar 18, 2010 | Canon PIXMA MP830 All-In-One InkJet...
Jan 12, 2008 | Canon PIXMA MP830 All-In-One InkJet...
552 people viewed this question
Usually answered in minutes!