Question about Printers & Copiers

1 Answer

Can you give me step by step instructions on how to install the finisher for my konica minolta 8020. I bought the copier and decided to get the finisher and cannot figure out how to set it up.

Posted by on

  • psgriggs Mar 07, 2009

    I don't know how to attach the finisher to the copier.  There are some parts I have but I don't know where to begin.  I think it attaches on the left of the copier, hope this helps

  • Dmitry Artuganov
    Dmitry Artuganov May 11, 2010

    Model of finisher FS-135 or FS-235 ?


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 136 Answers

Listen before I devolve my secret are you a dealer or an end-user, I am a konica dealer and I would hate to take food out of my dealers mouth cause an end-user refuses to call a dealer for help, and where is your machine located.

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Konica minolta bizhub 215 giving error c2558

Abnormally high toner density detected TCR sensor board
- The T/C ratios detected by the TCR sensor board (TCRSB) are above the threshold for the detection of abnormally high T/C ratio for three successive times.
- The connector between MFPB to TCRSB is disconnected.

Error Codes Konica Minolta bizhub 215

Mar 07, 2015 | Konica Minolta Printers & Copiers

1 Answer

How can install toner 114 for konica minolta211 copier?

Open the front door you will see the pictures how to install toner step by step. If no label of instruction,1) Open the front door 2) Pull the Old toner going you(it will swing) 3) Shake the New toner114 4) Pull out slowly the old cartridge 5) Removed SLOWLY the zeal of new toner 6) Insert it then closed .

Oct 21, 2014 | Konica Minolta Printers & Copiers

1 Answer

Konica Minolta Bizhub c754e Blue Lines after installing new machine

The blue toner cartridge or drum are damaged. First, try a different toner cartridge. This will probably eliminate the lines.

Apr 08, 2014 | Konica Minolta Printers & Copiers

1 Answer

Konica 8020 3c50

if the code is C-3C50 you have a big problem!!!!!!!!!!!!

You hit a serious code, noting can be done, this code requires a tech to come out and remove a chip inside the machine, which is then sent to Konica Minolta, then on to the US SECRET SERVICE since someone attempted to counter fit US currency!!!!!!!!!!!, until the US Secret Service determines what was done the machine stays inoperative , once what happen is determined tech will come out reinstall the chip reload firmware, and .NEVER EVER PLACE ANY CURRENCY ON A COPIER all the machine now a day have Bank Note chips..

You machine is also a legacy Konica machine so I don't know what Konica Minolta technician will do.

Apr 05, 2014 | Konica Minolta Printers & Copiers

1 Answer

Replacing picca fuse on Konica color 8020 fuser unit

Not recommended because the fuser unit has reached end of life, that is why its displaying the indication,

Feb 05, 2014 | Konica Minolta Printers & Copiers

1 Answer

Free manual

You can download your manual from Konica here.

Apr 05, 2009 | Konica Minolta Printers & Copiers

1 Answer


i down loaded the manual.

Apr 05, 2009 | Konica Minolta Printers & Copiers

1 Answer

Print Booklets with Konica Minolta Biz Hub C650 Printer

Select Print, and then "Properties"

Layout Tab - select Print Type: Booklet

Basic Tab - Select original size and then size of PAPER to be printed. 11x17 is standard 8.5x11 book when folded.

Finish Tab - select saddle stitch.

Thats it, easy as pie.

Jan 22, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

Problem in configuring IP address in Konica Minolta bizhub 210 Copier, Printer, Fax

Is there network card is installed in it, if yes then you can configure it with your network go to machine Manu in machine control panel and the in network settings here you can give the IP address and subnet mask after then reboot the machine.
If network card is no installed behind the machine then you can use its built-in USB or and parallel printer without NIC card.

Feb 01, 2008 | Konica Minolta bizhub 250 All-In-One Laser...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts


Level 3 Expert

96738 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides