Question about Canon PIXMA MP210 Photo All-In-One Printer
on this page
Click on drivers and downloads, if you don't get the downloads instantly try going to another page and then back. it might not work every time but the drivers are there.
Let me know if you need anything else.
Posted on Mar 06, 2009
If you do not have the software, you need to download the software from one of the following locations:
Official Canon Drivers and Software
Canon USA:DRIVER & DOWNLOADS
After downloading is finished, unplug the printer USB and run the software that you downloaded.
The software installer will tell you when to connect USB.
Posted on Mar 06, 2009
SOURCE: install my canon pixma mp210
Just use this link it will take you to the software needed
Complete Inkjet Solutions
Posted on Oct 14, 2008
SOURCE: Canon PIXMA MP210
Hi. This might be stating the obvious, but try cleaning the contacts in the printer and on the cartridge with isopropal alcohol. I have a Canon Pixma MP520 which I have had for most of this year now, and it works fine. I am not sure if I will be buying another Canon printer after the problems I have just read on FixYa though! Another thing you might try is carefully bending the contacts on the printer that touch the copper strips on the cartridge to ensure they touch properly. I have not looked too closely at mine, but I presume there must be copper contacts of some sort that are spring loaded, which press up against the contacts on the cartridge when it is installed. Hope that helps.
Posted on Nov 06, 2008
SOURCE: Hi, my canon pixma mp210 shows
Error code E16 indicates that remaining ink is unknown. It is common problem in refilling the cartridge. To fix this problem you need to deactivate ink level detection function. Follow this procedure: press and hold STOP/RESET button for about 9 seconds or more then release it. Now E16 has disappeared and the printer should work properly. As consequence, ink volume in panel become UNKNOWN. No problem. It will be back to normal condition when you replace the cartridge with new one.
Canon Inkjet Forum
Posted on Dec 11, 2008
Error 6000 means - The specified file could not be encrypted.
Solution: reinstall the printer driver.... it's better to install a upgraded version of driver...
Posted on Mar 19, 2009
Tips for a great answer:
Jan 22, 2011 | Canon PIXMA MP210 Photo All-In-One Printer
Nov 18, 2010 | Canon PIXMA MP210 Photo All-In-One Printer
Mar 23, 2010 | Canon PIXMA MP210 Photo All-In-One Printer
Aug 31, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
Jun 03, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
May 19, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
Oct 01, 2008 | Canon PIXMA MP210 Photo All-In-One Printer
Apr 01, 2008 | Canon PIXMA MP210 Photo All-In-One Printer
923 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: