Question about Televison & Video

Open Question

Lost instruction manual for gemini universal remote control

I have two of these remotes, and both have the same #'s inside the battery compartment, both remotes are the exact same, I see R80308 inside the remote, then on the back of the battery door the following: 710620020 00 cav1

Posted by on

  • hummeral May 03, 2009

    I have the same remote and cannot figure out how to program it. Any help would be appreciated!

×

5 Suggested Answers

  • 2 Answers

SOURCE: gemini universal tv remote

Hi, I have the same remote (CL033 one) and I found these instructions http://klkl.co.uk/?p=13 and they worked great for me.

Posted on Nov 18, 2007

  • 1 Answer

SOURCE: gemini universal tv remote

I am use the Gemini TV Box, but my tv box driver cd is breckup, so, i required of driver for installation the gemini tv box. plz help to solve this problems.

dipankarcc@rediffmail.com

Posted on May 18, 2008

SOURCE: gemini universal tv remote

Codes for GEMINI Quik40

Posted on May 19, 2008

aprmaejun
  • 97 Answers

SOURCE: PROGRAMING MY MAGNAVOX UNIVERSAL REMOTE CONTROL

http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

Posted on Jun 20, 2008

  • 1 Answer

SOURCE: Gemini Universal Remote - TV and DVD codes

I'm just calling the Funai company and buying a new remote.

Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need the model number to this RCA universal remote control


It is a RCA universal remote control. The exact model number can be seen in its battery compartment. Just take out the batteries and check.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Jul 13, 2016 | RCA Televison & Video

1 Answer

HOW CAN I OPEN UP A REMOTE CONTROL UNIT / MAGNAVOX - NC003UD TO CLEAN IT


Check inside the battery compartment and feel over any labels, there may be screws there that need to be removed before it will come apart. If no screws then there will be snap clips around the outer edges of the case, but inside so you don't know exactly where they are located. To get it apart use something like a credit card push it in between the 2 halves of the housing and slowly work it around, in and out until you find where the snaps are located, then use the card to carefully slide the snaps apart. Good luck...the snaps do tend to breal easily.

Aug 13, 2014 | Magnavox NC003 Remote Control NC003UD

1 Answer

I changed the batteries in my rca remote and now the indicator light will not turn off and the remote does not work


The new batteries may have been installed incorrectly. Check the polarity marking inside the battery compartment.

Nov 11, 2013 | RCA New Original CRK76WB3 Remote Control

1 Answer

Remote control for vmb070 does not work


There should be a clear indication on your remote where the battery compartment is. Usually there is a slideoff cover that has to be removed. Some remotes have covers that are difficult to remove. Once you have the compartment open, you can remove the batteries. Check for signs of corrosion inside the compartment and clean it before installing new batteries. Be sure to observe proper polarity when installing new batteries

Mar 17, 2013 | Televison & Video

1 Answer

Panasonic remote not working


Check its infrared emission. Check it with fresh batteries. Check the battery contacts inside its battery compartment for any dust or rust accumulated. Clean them well and check. If you wish to get more details, check this link. There is is post discussing about how to check, clean and repair a remote control. Pull up older posts. If nothing helps, check the infrared sensor inside the TV.

Mar 08, 2013 | Panasonic N2qayb000570 Remote Control

1 Answer

Remote opens neighbor's garage door too


Usually on the backside of your opener you will see some dials( for adjusting up and down force so don't mess with them) in the same area you should also see a series of tiny, usually white, switches( dip switches ) with numbers. You will notice that the switch positions vary, some will be up and others will be down, that is how the code is set so that the opener recognizes your remote( inside the battery compartment of your remote are more dip switches that are set to the exact same pattern, hence they communicate with each other) The mathematical odds of this are really high, but it sounds like you and your neighbors dip switches are both set to the exact same pattern/code. One of you will need to change the position of your switches on both the opener and remote. Please post if this is the case as I am really curious/ will be amazed if this is the case:)

Feb 25, 2013 | Genie Company IntelliCode GICT390-1BL...

1 Answer

My harmony 880 will not charge


Generally there are three possibilities (apart from the battery going bad) that can cause your remote not to charge:

1) Some folks have reported that the battery is not sitting tightly enough in the battery compartment. You can try folding a small piece of thin cardboard and place it between the battery and the back of the compartment. This will push the battery towards the front of the compartment and create a tighter connection against the contacts.

2) There have been reports of problems with some of the charging cradles in which the remote does not make sufficient contact with the contacts in the cradle. To ensure that the remote begins to charge, place it in the cradle and listen for a single beep. The slide show2_bing.gif should start and then, after a few moments the screen should darken. If you hear two beeps at any time, it means that the remote has lost contact with the charging cradle and has 'woken' and is no longer in charging mode. Wiggle the remote to ensure that it is sitting in the cradle and making contact.

3) If you still have trouble after you have tried everything above, there may be a loose connection inside the remote itself. There is a very small plug that connects the charging terminals on the remote to the battery compartment. In some cases, this plug can become loose (especially if the remote has been dropped). Opening the remote and checking to make sure that the plug is completely seated is another thing to check if all else fails.

Dec 02, 2009 | Logitech Harmony 880 LCD Remote Control

1 Answer

Dead. When I put on charger I get no response


Generally there are three possibilities (apart from the battery going bad) that can cause your remote not to charge:

1) Some folks have reported that the battery is not sitting tightly enough in the battery compartment. You can try folding a small piece of thin cardboard and place it between the battery and the back of the compartment. This will push the battery towards the front of the compartment and create a tighter connection against the contacts.

2) There have been reports of problems with some of the charging cradles in which the remote does not make sufficient contact with the contacts in the cradle. To ensure that the remote begins to charge, place it in the cradle and listen for a single beep. The slide show2_bing.gif should start and then, after a few moments the screen should darken. If you hear two beeps at any time, it means that the remote has lost contact with the charging cradle and has 'woken' and is no longer in charging mode. Wiggle the remote to ensure that it is sitting in the cradle and making contact.

3) If you still have trouble after you have tried everything above, there may be a loose connection inside the remote itself. There is a very small plug that connects the charging terminals on the remote to the battery compartment. In some cases, this plug can become loose (especially if the remote has been dropped). Opening the remote and checking to make sure that the plug is completely seated is another thing to check if all else fails.

Dec 01, 2009 | Logitech Harmony 880 LCD Remote Control

2 Answers

How to open remote control Sony RM-Y181


There should be small screws (usually phillips head) at either the top, bottom or both ends of the back of the remote. Unscrew those and pry loose. If not, they will be under the batteries, inside the battery cover.

I assume that's what you mean by open?

:D

Aug 10, 2009 | Televison & Video

1 Answer

Universal remote


I just bought a new remote. You can pick them up at walmart for $5.00. That's better than paying $14.99 for some advice!!!!

Sep 10, 2008 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...