Question about JVC KW-AVX800 CD Player

3 Answers

I am unable to open the Panel to insert cd

I am unable to open the Panel to insert the CD. It is asking to push the reset button. i tried, but it's still not working. Any any help on this, please?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My touchscreen is out on my kw av x800 ,so in order to get my cd/dvd/sd card out i just push and hold the open/eject button down for 5 sec or so then let go,and it will open then just push again to close

Posted on Jan 10, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

I was having a problem similiar to this. The solution to my problem was that I had to have the radio taken apart because the SD card had popped out of the slot and was not letting the face slide down to eject. It cost me about $40. Now I just load all my movies and music to my 160 GB HDD and watch them from there. It will also be a good thing if I decide to sell the radio (which I won't) because the CD/DVD laser will be almost new. If you had an SD card in the slot, it might have come out.

Posted on Dec 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Somtimes you have to disconnect power to the unit. pull the unit out and unplug it or disconnect the battery. if it doesnt work you may need a hammer.

Posted on Mar 25, 2009

  • beloww1 Jan 10, 2011

    my touchscreen went out and i too had this problem. What i do is push and hold the open/eject button down for like 5 or so sec and it will manually open and close that way

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an alpine cda-9883 cd won't eject & error


try detaching the "face" and there should be a little button that you can only push in with some kid of really thin stick,maybe a pin that will reset the cd player and hopefully work

Oct 27, 2009 | Alpine CDA-9883 CD Player

1 Answer

Xplode cdx-gt460u CD Reset Error


REMOVE THE FACE PLATE THERE SHOULD BE A RESET BUTTON ON THE FRONT OF THE RADIO PUSH THAT AND TRY AGAIN IF THAT DOESNT WORK THEN PULL THE RADIO AND DISCONNECT FROM POWER 4 A LIL BIT AND THAT MAY WORK

Dec 29, 2008 | Sony XPLOD CDX-GT200 CD Player

2 Answers

Face plate won't open far enough to insert a CD


try to hit slowly the faceplate in the left side until its open

Mar 08, 2008 | Pioneer DEH-P80MP CD Player

6 Answers

Car cd player with usb port getting error 12 message


I just have this problem: the tuner is working well, but the USB and CD stopped giving sound after it was working well at first time.
I JUST PUSH THE RESET BUTTON, SITUATED NEXT TO USB AND AUX PLUG ON THE FRONT PANEL. EVERYTHING WORKS WELL NOW. PAGE 3 ON THE MANUAL
CLAUDE

Feb 24, 2008 | Car Audio & Video

3 Answers

Sony CDX-L480X


I had the same problem, CD not accepted by unit and pressing source button to select CD player causes unit to display reset.
Using reset button just causes unit to 'whir' for a while, problem is not solved. Firstly with unit switched off, and the ignition off I inserted a CD using some gentle force, I then inserted a second CD, forcing it in over the top of the first. Next I pressed and held the reset button for a short time before releasing it. Both CDs were ejected, when the unit had stopped I took the CDs out, replaced the front panel and turned on the ignition, The unit will now accept CDs and eject them O.K.

(This did take two attempts to get right). Seems to reset the eject status of the CD player.

Avulon

Feb 17, 2008 | Sony CDX-L480X CD Player

4 Answers

CDC-X304 in permanent DEMO mode


I HAVE SAME PROBLEM. AFTER I REPLACED MY DEAD BATTERY MY AIWA CDC-X304 IS STUCK IN THE DEMO MODE. ONLY CD WORKS BUT ALL BUTTONS ON FACING DO NOT RESPOND. ANY SUGGESTIONS HOW TO RESET.

Jan 16, 2008 | Aiwa CDC-X304 CD Player

1 Answer

CD Ejects


A couple of suggestions. Check ALL the fuses, most units have 2 or more. Search the front panel carefully, many units have a tiny 'reset' switch, which is activated by pushing a pencil point into it's hole. They are usually marked, but with tiny letters.

Jul 17, 2007 | Eclipse CD2000 CD Player

1 Answer

Cd ejection


Reset this unit by pressing and holding the power/ATT and SEL buttons at the same time for several seconds.

Mar 13, 2007 | JVC KD-S680 CD Player

Not finding what you are looking for?
JVC KW-AVX800 CD Player Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

kakima

Level 3 Expert

98816 Answers

xxxxxx xxx

Level 3 Expert

4724 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...