Question about JVC TH-A85 System

1 Answer

Does any 1 know remote codes 4 a audiosonic television pls?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I need the codes for a phillips tv to program my remote

Posted on Mar 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Codes for setting up a universal remote


Sorry. GE remote control have no set-up codes to this system. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Aug 11, 2016 | GE Home Theater Systems

3 Answers

Region code


You can change region code three times, I do not know if there is a hack to make it universal, I will have a look.

Jul 13, 2008 | Home Theater Systems

1 Answer

How do you program it to a GE universal remote


these are the codes
LG: 004 005 009 012 050 057 080 156 227 338

  • How to Program a GE Universal Remote ' Techwalla https://techwalla.com/content/program-ge-universal-remote Lost your Remote? Need help programming your GE Universal Remote? Most TV's, VCR's, DVD Player's, Cable and Satellite Boxes will work with a GE universal...
  • How to Program GE Universal Remote: Quick Steps www.brighthub.com > Electronics > Home Theater > Home Media 2011-04-18 · How to Program GE Universal Remote Using the Code Search Function. If you've tried the codes listed for your device brand and are unable to get your ...
  • GE Universal Remote Codes and Instructions ' direcTutor www.directutor.com/content/ge-universal-remote-instructions Goto GE remote Codes. Direct Code Entry for GE remotes with 4 digit codes. 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
  • How to Program a GE TV Remote ' Techwalla https://techwalla.com/content/program-ge-tv-remote GE universal remote controls allow users to program multiple devices onto a single remote. The remote control uses codes to detect the device, and you can...
  • GE Universal Remote Quick Start Guide - YouTube Youtube
    • BY JASCOPRODUCTSCOMPANY
    • 3 MIN
    • 216K VIEWS
    2013-04-18 · Video embedded · http://www.jascoproducts.com Eliminate remote clutter with GE Universal Remotes
  • How to Program a GE Universal Remote Control ' eHow www.ehow.com > Tech > TVs > Remote Controls
    • BY EHOW ELECTRONICS EDITOR
    Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are ...

  • May 09, 2016 | LG "32"" inch New 2011 HD LCD TV With HD...

    1 Answer

    Wher can I find a remote control for the above model Panasonice stereo radio?


    To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
    Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

    Dec 01, 2015 | Home Theater Systems

    1 Answer

    How do I get my audiosonic universal remote control to work with my away DVD home theater da646pa


    Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
    http://remotesearch.blogspot.com/
    http://electronicshelponline.blogspot.com/
    http://electrohelponline.blogspot.com/
    Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

    Nov 13, 2015 | Universal Remote Control Home Theater...

    4 Answers

    Code for Comcast remote for Sony DAVHDX275


    It seems like most (maybe all) Sony HTIB do not work with the Comcast Custom Remote. I've found a work around that fixes the volume control and power button though. Hope it helps you all. I have a DAVHDX275 but I think this will work for most Sony HTIB systems.

    What you need to do is steal some codes from a like product and then hardcode in the changes you need to the comcast remote. Set your AUX to 21232 (a sony code for TV/VCRs).

    Then do the following:

    1. While still on AUX, press and hold SETUP again until the remote blinks twice
    2. Type 994
    3. Press and release SETUP
    4. Type 32975
    5. Press and release VOL+
    The remote should blink twice. That should reprogram the VOL+ to work with your Sony HT device. For each of the following function codes, follow the same steps and use the codes listed below:
    Vol+ = 32975
    Vol- = 31951
    Power = 32719
    Good luck. Let me know if it works.

    Sep 27, 2008 | Sony BRAVIA DAV-HDX267W Theater System...

    1 Answer

    Bose 321


    3 audio inputs (3 analog, 3 coaxial digital, 1 optical digital)

    2 video pass-through inputs (composite and S-video)

    Video output for TV (composite, S-video, and component)

    Media center • 3 1/4"H x 13 3/4"W x 10"D • (8.3 x 34.9 x 25.4 cm) • 6.7 lbs. (3 kg)

    Remote control • 1 1/8"H x 2 1/2"W x 9"D • (3 x 6.5 x 22.9 cm)

    Gemstone speakers • 2 1/2"H x 5 1/2"W x 4 1/8"D • (6.4 x 14 x 10.5 cm) • 1 lb. (.45 kg) each

    Acoustimass module • 14 1/2"H x 8 3/4"W x 19 1/8"D • (36.7 x 22.2 x 48.5 cm) • 23.3 lbs. (10.6 kg)

    Total shipping weight • 44 lbs. (20 kg)

    gray_hr.gif What's In the Box • Acoustimass® module • Media center • 2 speakers • 3·2·1 universal remote control • Setup DVD • Antenna stand • Stereo cable • Video cable • Speaker cable • Module cable • Rubber feet for Acoustimass® module • Rubber feet for speakers • Batteries • AM antenna • FM antenna • 120V power cord • Quick setup guidepls rate !!!!!!

    May 29, 2008 | Bose 321GS Series II System

    1 Answer

    Is it multiregional


    Sony are probably the most protective manufacturer of this kind of information. All manufacturers carrying a DVD logo are obliged to say "no" but will normally intentionally leak this to boost sales, particularly in non-US areas.


    But try this:

    1. In order for this hack to work, you will have to send an infra-red code to your player with a OneForAll remote such as the OneForAll 6 (or URC7560) or OneForAll 4 (or URC7740) or OneForAll 4 Digital, or One For All 5 Digital (or URC 7555) with the following instructions:
    • Press the DVD button
    • Hold down the Magic button until the unit performs a double LED flash
    • Configure your remote using the setup code 0 5 3 3
    2. On your DVD recorder, using the official Sony remote, select the System-Menu option 3. On your DVD recorder, using the official Sony remote, select the Setup option 4. On your DVD recorder, using the official Sony remote, select the Options option 5. On your DVD recorder, using the official Sony remote, select the Command-Mode option 6. On your DVD recorder, using the official Sony remote, select the DVD1 option 7. On the official Sony remote, set the DVD1 option for the Command-Mode switch, under the sliding cover 8. Verify that both the official Sony remote control and your OneForAll remote control can power off and on your DVD player 9. Program your OneForAll remote with the following instructions:
    • Hold down the Magic button until the unit performs a double LED flash
    • Configure your remote using the setup code 9 9 4 or 0 0 9 9 4 if your remote only accepts 5 digit codes
    • Press the Magic button once
    • Configure your remote using the setup code 1 8 9 or 0 0 1 8 9 if your remote only accepts 5 digit codes
    • Press the 1 button once, a double LED flash should occur
    10. Program your OneForAll remote with the following instructions:
    • Hold down the Magic button until the unit performs a double LED flash
    • Configure your remote using the setup code 9 9 4 or 0 0 9 9 4 if your remote only accepts 5 digit codes
    • Press the Magic button once
    • Configure your remote using the setup code 2 5 5 or 0 0 2 5 5 if your remote only accepts 5 digit codes
    • Press the 2 button once, a double LED flash should occur
    11. Program your OneForAll remote with the following instructions:
    • Hold down the Magic button until the unit performs a double LED flash
    • Configure your remote using the setup code 9 9 4 or 0 0 9 9 4 if your remote only accepts 5 digit codes
    • Press the Magic button once
    • Configure your remote using the setup code 0 9 5 or 0 0 0 9 5 if your remote only accepts 5 digit codes
    • Press the 3 button once, a double LED flash should occur
    12. Program your OneForAll remote with the following instructions:
    • Hold down the Magic button until the unit performs a double LED flash
    • Configure your remote using the setup code 9 9 4 or 0 0 9 9 4 if your remote only accepts 5 digit codes
    • Press the Magic button once
    • Configure your remote using the setup code 2 2 1 or 0 0 2 2 1 if your remote only accepts 5 digit codes
    • Press the 4 button once, a double LED flash should occur
    13. Program your OneForAll remote with the following instructions:
    • Hold down the Magic button until the unit performs a double LED flash
    • Configure your remote using the setup code 9 9 4 or 0 0 9 9 4 if your remote only accepts 5 digit codes
    • Press the Magic button once
    • Configure your remote using the setup code 0 7 9 or 0 0 0 7 9 if your remote only accepts 5 digit codes
    • Press the 5 button once, a double LED flash should occur
    14. Place your DVD player into Standby mode 15. Press the buttons 1, 2, 3, 4 and 5 on your OneForAll remote control, in order, one at a time 16. Your DVD player should show the words TIMER OK 17. Press the buttons 1, 2, 3, 4 and 5 on your OneForAll remote control, in order, one at a time 18. Your DVD player should return itself to Standby mode 19. Remove the batteries for significant period of time to wipe the programmed codes on your OneForAll remote

    Nov 27, 2007 | Sony DAV-S500 System

    3 Answers

    CORRECT SETUP CODE FOR RECEIVER


    that is because i think that your reciever would have its own code

    Jan 29, 2007 | Onkyo HT-S790S System

    Not finding what you are looking for?
    JVC TH-A85 System Logo

    168 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top JVC Home Theater Systems Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    yadayada
    yadayada

    Level 3 Expert

    60792 Answers

    kakima

    Level 3 Expert

    96417 Answers

    Are you a JVC Home Theater System Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...