Question about Toshiba Estudio 200L Copier

3 Answers

Broken registration Hi sir I am from Iraq. I have one toshiba estudio 200.That one show CALL FOR SEVICE first. Then i sevice with blower after that also that show the same But the same time i just replace the battry which one is inside that(3V).Now it is showing "BROKEN REGISTRTIO". What can i do please give me a addvice.

Posted by on

  • sreeju s nair Apr 30, 2009

    toshiba estudio 200 this one is now ok i mean the brokenregistration is gone and the mechine is working but the copyer is not working well because when i coping a document that one is coping only the 2" from the left side only other part is did not showinng in the copy. this is in the exposure glass. But if i use the ADF that one is did not coping it taking the paper green light is working.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toshiba Master
  • 524 Answers

If broken registartion, try to initialize the machine by pressing *+1+3 and ON the machine.

What is the error code of CALL FOR Service ?
Press clear+8 to check the code...

Posted on Mar 10, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 136 Answers

First off I can not help unless I know if you changed the Developer,. chances are if your getting this error you might of replace the developer without calibrating it, so please tell me what you did, did you chance any parts and if so what ?????

Posted on Mar 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi sir I am from iran. I have one toshiba studio 160.it is showing "BROKEN REGISTRTIO". What can i do please help me .

Posted on Nov 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red lamp, the alarm lamp on, and machine does not work, how can I fix that?


If you are not a printer/copier technician my best advice: Don't mess with your copier. Call an authorized sevice. you might need to check electronic circuits, boards, componentes, etc.

Oct 28, 2015 | Toshiba estudio 305 Copier

1 Answer

Sevice mode for toshiba estudio18


Turn ON the power while pressing the [Clear/Stop] button. On the Service Mode screen displayed after
starting up, press the up key, left key, bottom key, and then right key, and then press [START]. To enter
the desired mode, select the mode using the up or down key, then press [OK].

Aug 10, 2015 | Toshiba Printers & Copiers

1 Answer

My konica minolta copier says call sevice code


Sir,

Fuser Code (Hot Unit has over heated) To reset you will need to go to 25 Mode to enter his mode you must turn off the machine then holding down the 2 and 5 button turn on the machine, hold them 25 down for at least 30 second once in 25 mode select SW (soft Switch) select "3" then "2" it should be a "1" change to a "0" then exit and turn off the machine and turn "ON".

Feb 24, 2010 | Konica Minolta Printers & Copiers

1 Answer

Registration off in Toshiba 311C


the drive gears that are behind the flywheels are off or broken teeth..each color drum have a drive and they need to be align or replace..this happend to me once..not a common problem but it happens.

Jun 17, 2009 | Toshiba Estudio 200L Copier

2 Answers

Call for sevice


Correction, you need to press "clear" and "8" simultaneuosly and hold to display error code...

Apr 13, 2009 | Toshiba Estudio 200L Copier

1 Answer

Hi, I have one Toshiba e studio 200 that one is did not working as a printer now. Before that one was working. But yesterday i did the machine default setup. After that i did not getting the printer.


What kind of interface your estudio 200 is running ? GDI/parrallel cable or network?

If GDI, u need to make sure u installed the correct driver.
If network, make sure the IP address is static, network driver is installed properly.

Mar 28, 2009 | Toshiba Estudio 200L Copier

1 Answer

I need part number for estudio 200 fuser and image unit


Hello sir; we do carry those parts if you need that please email me your phone number,

Jan 06, 2009 | Toshiba Estudio 200L Copier

6 Answers

I want reset my estudio 163


Press *+1+3 and power on the machine.

Nov 29, 2008 | Toshiba e-Studio163 Copier

10 Answers

Service required for EPSON STYLUS R230


http://www.efillink.com/Support/HowToWasteInkDrainR200.html

Sep 25, 2008 | Epson Stylus Photo RX700 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

744 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you a Toshiba Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...