- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It shows Nokia BH-503 Headset installed in View devices in win8 But it doesn't connect. I tried manually connecting in phones it works by pairing. But doesn't get connected in win8. Can anyone help me solve this?
1.With the headset off, hold the Multifunction
Button until the LED remains on (about 2 seconds). 2 Perform a device discovery from
the phone. 3 When the scan is complete, the phone
displays the devices found. 4. Select the headset from the list of
found devices. When prompted by the phone, enter the passkey 0000
and confirm to pair the headset with the phone. Thank You
Start with the headset turned off, and the bluetooth radio of the device you want to pair the headset to, turned on. Then, press and hold the headset's power button until the led flashes rapidly. It is indicating is in pairing mode. Now, make your device search for new devices, and select the BH-100 from the list. If a passkey (or PIN, or pairing code) is requested, enter '0000' (four zeros).
If your headset's user guide happens to be missing, download it from this location, if you want.
Hope it works for you.
I also experienced the same problem. After trial and error I realized that the bluetooth device needs to be reset to fix this issue.You may reset the bluetooth device by deleting the pairings from the headset or reseting the headset. Switch off the headset, and press and hold the multifunction key for over 8 seconds. Start pairing the device again. It should work fine now with default passkey 0000
If you haven't actually manually changed it, the password is always the
last four digits of your phone number (ex. 1-555-868-2212 your password
is 2212). If you manually changed it, you need to call Verizon and have
that worked out.
You just have to press your blutooth on/off button a bit longer for 15 to 20 sec, when the LED blinking stops (noted that the LED should be turn ON but not blinking), try to search the device again with your phone. By that time your blutooth headset should be recognized by your phone, then select and enter the code 0000.