Question about Proscan 26LB30QD 26 in. LCD HDTV
With the tv laying flat on to the screen, remove the two screws in the recessed holes. Then remove the two screws above towards the input panel, one under AUDIO-L/AUDIO-R and the one under HDMI-1. The stand should easily slide out.
Posted on Mar 30, 2009
To remove the stand of your TV look at the manual on page 31. The 2 holes in the center bottom has a sreew in it remove the screews and the stand should come off. Hope This helps. If not look at page 31 on the link below. you can see the 2 holes an inch above the senter of the stand.
Good Luck and Please Rate FixYa!
Posted on Mar 06, 2009
Remove four screws on back of tv above the stand. The difficulty is that when the stand was slid onto tv base and into mounting bracket, plastic clips on the stand locked on to mounting bracket inside the tv and cannot be released without cutting or breaking them. The bracket will slide down and out of tv when you remove the four screws.
Posted on Mar 28, 2009
Posted on Mar 08, 2009
Tips for a great answer:
Sep 08, 2015 | Westinghouse W4207 42 in. HD-Ready LCD TV
Mar 30, 2011 | Flat Panel Televisions
Dec 10, 2009 | Proscan 26LB30QD 26 in. LCD HDTV
May 14, 2009 | Sampo PME-42S6 42 in. HD-Ready Plasma...
Mar 16, 2009 | Proscan 26LB30QD 26 in. LCD HDTV
Feb 16, 2009 | Proscan 26LB30QD 26 in. LCD HDTV
Dec 27, 2008 | Proscan 26LB30QD 26 in. LCD HDTV
Dec 09, 2008 | Flat Panel Televisions
Nov 22, 2008 | Proscan 26LB30QD 26 in. LCD HDTV
Jan 05, 2016 | Proscan 26LB30QD 26 in. LCD HDTV
918 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: