Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

1 Answer

I want to change my NAT settings on my router

Hello, I have a COMTREND CT-5361T wireless router in my house.  I have a new Mac computer.  I would like to be able to change my NAT settings so that I can download things like off of Vuze, but it says my NAT settings are too high.  I also have problems with my PS3.  This NAT thing is turning into a nightmare.  I just want to make it completely open so I can do what I want with it!  Please Help! my 360 says my nat settings are moderate and i want to change it am i able to do so from my computer?

Posted by on

  • Anonymous May 06, 2009

    i know i have the same problem as you have, no way of changing, but to buy a new router from what ive seen so far...


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 708 Answers

Step 1 : Check the IP Address of the PS3 And take a note of it

Step 2 : Open RSP By typing on the Address bar of the internet explorer

Step 3 : On the left side Click Firewall

Step 4 : Leave the Password blank and click Submit

Step 5 : Disable it And Apply Changes

Step 6 : On the left side Under Firewall Click DMZ

Step 7 : Add the IP Address of thePS3 in DMZ

Step 8 : Click Apply Changes

Step 9 : Restart the Router

Step 10 : Test the Connection

Posted on Jul 22, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Yesterday, we got our internet upgrade from 4mbs

Hi there , Please ensure all IP settings are correct on the Mac , and also try calling your ISP Support Center , they should offer it too members for Free, Ask them for Desktop Support for your Mac ,explain your situation to them , and they will resolve it giving you step by step guidance over the Phone,
Hope you come right

May 22, 2010 | Comtrend CT-507 Router

2 Answers

I need to download the driver, where can I download the driver for COMTREND/CT-5071T for a Mac for free?

If you need to configure something on the router, hook to it via ethernet wire to configure it. the default ip address for the router is You will need to assign a static IP address to your wired network card in the range of 192.168.1.x, I would static it to Then after you have staticed your IP address, use a browser to navigate to the default user/password for the router is: username:root

You should be able to change any settings then that you need to. Also, any firmware updates you would need should be provided by your ISP.

Apr 29, 2010 | Comtrend CT-507 Router

1 Answer

Forgot my wireless password, bought a new computer, can't use it.

you can reset the password by doing a factory reset to the router - usually a little button you press on the back with a pen through a small hole. Doing this will mean setting up your isp details again.
alternatively, connect using a lan lead, log in to the router and change the wifi password.

Apr 28, 2010 | Comtrend CT-507 Router

1 Answer

Have laptop with internet but want to share it with xboxs

Yes, simply set up laptop as a mini server (Wireless) at the other end of the house (Where the Xboxes are) and ensure it has the WEP key installed when asked to access the router / internet. Buy a router adapter for each Xbox 360 that connects to them in the RJ45 slot and connect thru the laptop agian using the WEP key that you should have installed in the Router.

Mar 05, 2010 | Routers

1 Answer

I have a comtrent 5361t router/modem i cannot get

Try manually assigning your computer to an IP address in the same subnet as the Comtrend.

For Example: Set the computers IP to with a Subnet Mask of and default Gateway of

If that does not allow you to access the admin page at then try resetting the router.

Good Luck!

Nov 18, 2009 | Routers

2 Answers

How do you locate wep key for comtrend ct-5361t router

To find out the WEP key, you will need to access the routerset up. Do you have any computer connected to the router Or any computer online using the same router ? If you do not have any computer online through the router then you will need to connect the computer to the router and access the routerset up. Once you access the router set up then you will be able to locate the WEP key. Click Here for step by step solutions

Nov 17, 2009 | Routers

1 Answer

I have a comtrend ct-5361T wireless router can not access internet

  • set the wireless settings first to no password first for this is a password issue most of the times
  • and change the SSID name and channel not auto, set to 6 or 11

Jul 31, 2009 | Routers

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

1,351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides